BCZAMD Ende-r 5 plus kit 3D Printer Platform 377 x 370 mm JanusBPS PEI Sheet Spring Steel Plate Double Sided Powder + Smooth Coated PET PEO Sheet Metal Plate Print Bed

Double-sided coated steel plate: one side is smooth PEO coating, the bottom surface of the printed model is smooth, and the model is easy to remove and clean after the print is completed and cooled. The other side is finished with a frosted PEI surface. The matte surface of the decal has a unique frosted touch and provides higher adhesion and higher pressure for the model without warping. Applicable models and compatible consumables filament: this steel plate is suitable for Ende-r 5 plus printers, for 3D printers with a platform size of 377 x 370 mm. Please confirm the size of your printer's platform before ordering. Compatible with printing a wide range of filament, supports PLA, PETG, ABS, TPU, TPE, HIPS, PA-CF, WOOD, etc. High resistance: PEO texture print bed can withstand 100°C high temperature, PEI powder coating can withstand 190°C. The nozzle must not touch the plate directly to prevent scalding of the surface layer of the plate. Reference temperature of the various deliveries; PLA: 50-65 ℃, PETG: 70-80 ℃, TPU: 60-70 ℃, ABS: 90-100 ℃ (peo texture surface is not suitable for ABS) 【After-sales Support】We are a professional manufacturer of 3D printer parts, if you have any technical questions about our products, please feel free to contact us. Our technical team of engineers will provide you with support at all times. Special notes: This product does not contain the B-side of the Maaggnten, there is another product of the same type with B-side in the shop. Please refer to the product description for more information about this product.; Product description What do you get? 1 sheet 377 x 370 mm one side peo texture one side powder gold steel plate. 1 sheet of sandpaper with 600 stitches and 1 sheet of 1000 stitches 1 sheet of JanusBPS-PET PLATE instructions for use. Precautions: 1. If the adhesion of the powder surface is not sufficient, Use the included sandpaper to sand the surface easily. to increase adhesion. 2. PET PEO texture surface temperature resistance of 100 ℃. Powder PEI surface temperature resistance of 190 °C. The nozzle should not directly touch the plate to prevent the burning of the plate surface. 3. The first layer of the levelling nozzle and platform distance within 0.05-0.2 mm to ensure that the deliveries in the printing platform adhesion. For the first layer, a speed of 10-25 mm/s is recommended, and the cooling fan must be turned off for the first 1-3 layers of pressure. 4. Reference temperature of different consumables; PLA: 50-65℃, PETG: 70-80℃, TPU: 60-70℃, ABS: 90-100℃ (PEO texture surface is not suitable for ABS). 5. Levelling nozzle cannot be too low when the nozzle cuts the platform will cause permanent damage. or the first layer is too low, the adhesion becomes too tight, which when taking the mould to tear the surface layer. 6. It is recommended to take the mould after cooling, Not cooled to take the mould adhesion is stronger, easy to cause the surface out. 7. Steel plate is a consumable with a service life, The correct way of use can extend the service life. Please use according to the above requirements.; Product description What do you get? 1 sheet 377 x 370 mm one side peo texture one side powder gold steel plate. 1 sheet of sandpaper with 600 stitches and 1 sheet of 1000 stitches 1 sheet of JanusBPS-PET PLATE instructions for use. Precautions: 1. If the adhesion of the powder surface is not sufficient, Use the included sandpaper to sand the surface easily. to increase adhesion. 2. PET PEO texture surface temperature resistance of 100 ℃. Powder PEI surface temperature resistance of 190 °C. The nozzle should not directly touch the plate to prevent the burning of the plate surface. 3. The first layer of the levelling nozzle and platform distance within 0.05-0.2 mm to ensure that the deliveries in the printing platform adhesion. For the first layer, a speed of 10-25 mm/s is recommended, and the cooling fan must be turned off for the first 1-3 layers of pressure. 4. Reference temperature of different consumables; PLA: 50-65℃, PETG: 70-80℃, TPU: 60-70℃, ABS: 90-100℃ (PEO texture surface is not suitable for ABS). 5. Levelling nozzle cannot be too low when the nozzle cuts the platform will cause permanent damage. or the first layer is too low, the adhesion becomes too tight, which when taking the mould to tear the surface layer. 6. It is recommended to take the mould after cooling, Not cooled to take the mould adhesion is stronger, easy to cause the surface out. 7. Steel plate is a consumable with a service life, The correct way of use can extend the service life. Please use according to the above requirements.; What do you get? 1 sheet 377 x 370 mm one side peo texture one side powder gold steel plate. 1 sheet of sandpaper with 600 stitches and 1 sheet of 1000 stitches 1 sheet of JanusBPS-PET PLATE instructions for use. Precautions: 1. If the adhesion of the powder surface is not sufficient, Use the included sandpaper to sand the surface easily. to increase adhesion. 2. PET PEO texture surface temperature resistance of 100 ℃. Powder PEI surface temperature resistance of 190 °C. The nozzle should not directly touch the plate to prevent the burning of the plate surface. 3. The first layer of the levelling nozzle and platform distance within 0.05-0.2 mm to ensure that the deliveries in the printing platform adhesion. For the first layer, a speed of 10-25 mm/s is recommended, and the cooling fan must be turned off for the first 1-3 layers of pressure. 4. Reference temperature of different consumables; PLA: 50-65℃, PETG: 70-80℃, TPU: 60-70℃, ABS: 90-100℃ (PEO texture surface is not suitable for ABS). 5. Levelling nozzle cannot be too low when the nozzle cuts the platform will cause permanent damage. or the first layer is too low, the adhesion becomes too tight, which when taking the mould to tear the surface layer. 6. It is recommended to take the mould after cooling, Not cooled to take the mould adhesion is stronger, easy to cause the surface out. 7. Steel plate is a consumable with a service life, The correct way of use can extend the service life. Please use according to the above requirements.