Meter Star Gas Heater Kit Replacement, Propane Gas Glass Tube Heater Control Box, Intake Air 10mm Outdoor Heater Controller Heater Stove Heater Mounting Kit

The inlet adapter is for a 10mm inner diameter that attaches directly by clips. Not suitable for hoses with connectors Regulator box contains all the basic components to fire, except for regulator and hose from 201 S/s of the tank Size of the box is 20cm (L) x 8cm (H) x 19cm (W), excluding igniter and knob height This is usually used for glass tube heaters, but the dimensions may be different for different brands, so the sizes are necessary before ordering Propane gas system including ignition burner and AAA battery igniter with safety control valve and toggle switch safety kit › See more product details; Product description Portable propane glass tube heater control box. Operating instructions: After you receive the package, please follow the installation tips and instructions. 1) Check the package if all parts are included. 2) Insert one AAA battery (#7) into the ignition pin and screw the switch firmly. (Must be prepared in advance, products do not include batteries). 3) Use 4 pieces of M6 screws and nuts to fix the control box on your heating panel. 4) Insert your regulator hose (ID approx. 10 mm) and attach it with the hose clamps until it is firm enough. 5) Connect the regulator to your propane gas container. 6) Inlet pressure is 30 mbar. Ready to install. ! How to work: 1) Turn the knob 90 degrees at the pilot position and continue to press. 2) Press the red button igniter at the same time until the ignition burner is ignited. 3) Release your hands, turn the valve to change the desired flame. Tips: When you turn the button to the pilot position, please hold it for seconds, at the same time press the igniter, do not release your hands before pressing the read button ignition pin. Remember to close the gas tank if you do not want to use it.; Product description Portable propane glass tube heater control box. Operating instructions: After you receive the package, please follow the installation tips and instructions. 1) Check the package if all parts are included. 2) Insert one AAA battery (#7) into the ignition pin and screw the switch firmly. (Must be prepared in advance, products do not include batteries). 3) Use 4 pieces of M6 screws and nuts to fix the control box on your heating panel. 4) Insert your regulator hose (ID approx. 10 mm) and attach it with the hose clamps until it is firm enough. 5) Connect the regulator to your propane gas container. 6) Inlet pressure is 30 mbar. Ready to install. ! How to work: 1) Turn the knob 90 degrees at the pilot position and continue to press. 2) Press the red button igniter at the same time until the ignition burner is ignited. 3) Release your hands, turn the valve to change the desired flame. Tips: When you turn the button to the pilot position, please hold it for seconds, at the same time press the igniter, do not release your hands before pressing the read button ignition pin. Remember to close the gas tank if you do not want to use it.; Portable propane glass tube heater control box. Operating instructions: After you receive the package, please follow the installation tips and instructions. 1) Check the package if all parts are included. 2) Insert one AAA battery (#7) into the ignition pin and screw the switch firmly. (Must be prepared in advance, products do not include batteries). 3) Use 4 pieces of M6 screws and nuts to fix the control box on your heating panel. 4) Insert your regulator hose (ID approx. 10 mm) and attach it with the hose clamps until it is firm enough. 5) Connect the regulator to your propane gas container. 6) Inlet pressure is 30 mbar. Ready to install. ! How to work: 1) Turn the knob 90 degrees at the pilot position and continue to press. 2) Press the red button igniter at the same time until the ignition burner is ignited. 3) Release your hands, turn the valve to change the desired flame. Tips: When you turn the button to the pilot position, please hold it for seconds, at the same time press the igniter, do not release your hands before pressing the read button ignition pin. Remember to close the gas tank if you do not want to use it.