Adjustable height: this is a 4-screw pump with a height-adjustable range of 4.3 inches. You can install hairdressing chair hydraulic pump on a chair and adjust to the correct height as needed, which is very convenient. Selected materials: the Barber Chair hydraulic pump made of cast iron, combined with a spray painted plastic housing, so you don't have to worry about it deforming during use, resulting in a longer service life. High load capacity: hairdressing chair pump adjustable height can withstand a weight of 200 kg, so you can be sure to place a chair on it, and people can also sit comfortably. Ergonomic design: its design corresponds to ergonomics, so you only need to step on the lever to raise or lower the chair without bending down. Easy to install: you just need to install the lever and plastic cover and then attach the entire lifting pump to the chair you want to lift. › See more product details; Product description Product description Description A suitable chair is crucial when you are doing delicate jobs such as cutting hair for guests. If the height of the chair is not appropriate, you may misestimate the angle and length of the trimming. The hairdressing chair hydraulic pump of this chair has a 4.3 inch radius, which can be easily adapted to guests of different heights and can be adjusted with a light pressure. It is an indispensable companion in a hairdressing salon and helps you transform a fixed height chair into a more adaptable lift chair! Key Features Create ideal chairs: With its help, you can easily adjust the chair height to an ideal position and thus better support your work and guests. EASY CLEANING Smooth surfaces are less prone to dust accumulation. Even if it gets dirty, you can clean it effortlessly. CUSTOMER CARE We strive to provide high quality products and services. If you have any questions, you can contact us at any time. We will reply as soon as possible and solve the problem for you. Details CURVED LEVER The front end of the lever is curved so that your feet can step on it more easily while maintaining a reasonable angle. ROUND CORNERS The lever is designed with rounded corners to avoid unnecessary scratches. Application: This barber chair hydraulic pump is suitable as a replacement part for most standard style chairs with four-hole and diagonal hole spacing of 4.53 inches bases in bars, beauty salons, hairdressing salons and other places. Specifications Model: YL700. Material: cast iron, plastic. Colour: Silvery Style: Modern Thread: M8. Surface treatment: painting Assembly Required: Yes Adjustable range: 11 cm / 4.3 inches. Maximum load: 200 kg/440 lbs. Suitable base diagonal hole spacing: 115 mm/4.53 inches. Gross weight: 8.05 kg/17.74 lbs. Net weight: 7.15 kg/15.76 lbs. Shaft diameter: 26 mm/1 inch. Base diameter: 89 mm/3.5 inches. Height of base: 57 mm/2.24 inches. Length of the lever: 28.5 cm/11.22 inches. Product height: 37 cm. Package size: 41.5*37*19.5cm/16.33*14.56*7.67in Package includes: 1 x hairdressing chair pump, adjustable height. All accessories for assembly. Notes: 1. Please note that this package contains only the chair hydraulic pump, please prepare other components yourself. 2. It is recommended to clean with a dry cloth. Please do not use detergents to wipe the surface of the product to avoid damage. 3. Please allow slight colour difference due to the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind this before ordering. Safety Warning 1. Please note that this package contains only the chair hydraulic pump, please prepare other components yourself. 2. It is recommended to clean with a dry cloth. Please do not use detergents to wipe the surface of the product to avoid damage. 3. Please allow slight colour difference due to the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind this before ordering. To determine if it fits your seat, you need to pay attention to the following four aspects. 4. Requirements for the upper interface: top thread of the spindle: m8 5. Shaft diameter: 26 mm. 6. Conical ratio of the shaft: 1:13 7. Requirements for the base connection: 4 holes and the diagonal distance of the holes is 115 mm. And please bring four m6 nuts; Product description Product description Description A suitable chair is crucial when you are doing delicate jobs such as cutting hair for guests. If the height of the chair is not appropriate, you may misestimate the angle and length of the trimming. The hairdressing chair hydraulic pump of this chair has a 4.3 inch radius, which can be easily adapted to guests of different heights and can be adjusted with a light pressure. It is an indispensable companion in a hairdressing salon and helps you transform a fixed height chair into a more adaptable lift chair! Key Features Create ideal chairs: With its help, you can easily adjust the chair height to an ideal position and thus better support your work and guests. EASY CLEANING Smooth surfaces are less prone to dust accumulation. Even if it gets dirty, you can clean it effortlessly. CUSTOMER CARE We strive to provide high quality products and services. If you have any questions, you can contact us at any time. We will reply as soon as possible and solve the problem for you. Details CURVED LEVER The front end of the lever is curved so that your feet can step on it more easily while maintaining a reasonable angle. ROUND CORNERS The lever is designed with rounded corners to avoid unnecessary scratches. Application: This barber chair hydraulic pump is suitable as a replacement part for most standard style chairs with four-hole and diagonal hole spacing of 4.53 inches bases in bars, beauty salons, hairdressing salons and other places. Specifications Model: YL700. Material: cast iron, plastic. Colour: Silvery Style: Modern Thread: M8. Surface treatment: painting Assembly Required: Yes Adjustable range: 11 cm / 4.3 inches. Maximum load: 200 kg/440 lbs. Suitable base diagonal hole spacing: 115 mm/4.53 inches. Gross weight: 8.05 kg/17.74 lbs. Net weight: 7.15 kg/15.76 lbs. Shaft diameter: 26 mm/1 inch. Base diameter: 89 mm/3.5 inches. Height of base: 57 mm/2.24 inches. Length of the lever: 28.5 cm/11.22 inches. Product height: 37 cm. Package size: 41.5*37*19.5cm/16.33*14.56*7.67in Package includes: 1 x hairdressing chair pump, adjustable height. All accessories for assembly. Notes: 1. Please note that this package contains only the chair hydraulic pump, please prepare other components yourself. 2. It is recommended to clean with a dry cloth. Please do not use detergents to wipe the surface of the product to avoid damage. 3. Please allow slight colour difference due to the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind this before ordering. Safety Warning 1. Please note that this package contains only the chair hydraulic pump, please prepare other components yourself. 2. It is recommended to clean with a dry cloth. Please do not use detergents to wipe the surface of the product to avoid damage. 3. Please allow slight colour difference due to the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind this before ordering. To determine if it fits your seat, you need to pay attention to the following four aspects. 4. Requirements for the upper interface: top thread of the spindle: m8 5. Shaft diameter: 26 mm. 6. Conical ratio of the shaft: 1:13 7. Requirements for the base connection: 4 holes and the diagonal distance of the holes is 115 mm. And please bring four m6 nuts; Product description Description A suitable chair is crucial when you are doing delicate jobs such as cutting hair for guests. If the height of the chair is not appropriate, you may misestimate the angle and length of the trimming. The hairdressing chair hydraulic pump of this chair has a 4.3 inch radius, which can be easily adapted to guests of different heights and can be adjusted with a light pressure. It is an indispensable companion in a hairdressing salon and helps you transform a fixed height chair into a more adaptable lift chair! Key Features Create ideal chairs: With its help, you can easily adjust the chair height to an ideal position and thus better support your work and guests. EASY CLEANING Smooth surfaces are less prone to dust accumulation. Even if it gets dirty, you can clean it effortlessly. CUSTOMER CARE We strive to provide high quality products and services. If you have any questions, you can contact us at any time. We will reply as soon as possible and solve the problem for you. Details CURVED LEVER The front end of the lever is curved so that your feet can step on it more easily while maintaining a reasonable angle. ROUND CORNERS The lever is designed with rounded corners to avoid unnecessary scratches. Application: This barber chair hydraulic pump is suitable as a replacement part for most standard style chairs with four-hole and diagonal hole spacing of 4.53 inches bases in bars, beauty salons, hairdressing salons and other places. Specifications Model: YL700. Material: cast iron, plastic. Colour: Silvery Style: Modern Thread: M8. Surface treatment: painting Assembly Required: Yes Adjustable range: 11 cm / 4.3 inches. Maximum load: 200 kg/440 lbs. Suitable base diagonal hole spacing: 115 mm/4.53 inches. Gross weight: 8.05 kg/17.74 lbs. Net weight: 7.15 kg/15.76 lbs. Shaft diameter: 26 mm/1 inch. Base diameter: 89 mm/3.5 inches. Height of base: 57 mm/2.24 inches. Length of the lever: 28.5 cm/11.22 inches. Product height: 37 cm. Package size: 41.5*37*19.5cm/16.33*14.56*7.67in Package includes: 1 x hairdressing chair pump, adjustable height. All accessories for assembly. Notes: 1. Please note that this package contains only the chair hydraulic pump, please prepare other components yourself. 2. It is recommended to clean with a dry cloth. Please do not use detergents to wipe the surface of the product to avoid damage. 3. Please allow slight colour difference due to the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind this before ordering. Safety Warning 1. Please note that this package contains only the chair hydraulic pump, please prepare other components yourself. 2. It is recommended to clean with a dry cloth. Please do not use detergents to wipe the surface of the product to avoid damage. 3. Please allow slight colour difference due to the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind this before ordering. To determine if it fits your seat, you need to pay attention to the following four aspects. 4. Requirements for the upper interface: top thread of the spindle: m8 5. Shaft diameter: 26 mm. 6. Conical ratio of the shaft: 1:13 7. Requirements for the base connection: 4 holes and the diagonal distance of the holes is 115 mm. And please bring four m6 nuts
|
