1. The biggest advantage is the cold light source, as it does not produce high temperatures on the printing surface and is suitable for printing various temperature-sensitive materials. 2. Long service life. Compared with conventional UV curing equipment, the life of the lamp is only 800-3000 hours, and the life of the UV LED UV curing system is 20,000-30,000 hours. 3. No pollution and environmental protection, the traditional high-pressure lamp method has in the lamp tube. Handling and transporting waste products is very tedious. Improper handling leads to significant environmental pollution. The LED curing device uses semiconductors for light emission, which does not pollute the environment. 4. The intensity of the UV light emitted is high, stable and even. Thanks to the use of high-performance UV LED chips and a special optical design, the ultraviolet light achieves high-precision and high-intensity irradiation; the ultraviolet light output reaches the irradiation intensity of 6800 uW/cm2. 5. Easy installation and space saving. The volume of the LED curing machine is only 1/5 of the volume of a conventional curing machine, which facilitates the installation of the equipment and reduces the space required at the production site. › See more product details; Product description Note: Due to the light and screen resolution, pictures and real objects may have slight color differences. Please refer to real products. Manual measurement may vary a few centimetres from the actual distance. We describe the light effect performance, not the voltage power. Product advantages: widely used in UV glue, UV ink, UV varnish (for LED), UV pressure exposure, etc. Matters that require attention: The wavelength of the UV curing lamps manufactured by our factory is over 360nm, which is within the safe range, but the following points should be observed during specific operation: 1. Do not look directly into the UV light source of the LED UV curing lamp for a long time. 2. Do not expose the skin to ultraviolet light for a long time. 3. Do not bend the cable of the polymerisation lamp frequently; 4. Do not disassemble the device as desired. Tips To achieve the best curing effect, you need to pay attention to two points: 1. The wavelength of the light curer contained in the UV adhesive must match the wavelength emitted by the UV lamp; 2. The ultraviolet energy emitted by the UV lamp must correspond to the energy required for curing the UV adhesive.; Product description Note: Due to the light and screen resolution, pictures and real objects may have slight color differences. Please refer to real products. Manual measurement may vary a few centimetres from the actual distance. We describe the light effect performance, not the voltage power. Product advantages: widely used in UV glue, UV ink, UV varnish (for LED), UV pressure exposure, etc. Matters that require attention: The wavelength of the UV curing lamps manufactured by our factory is over 360nm, which is within the safe range, but the following points should be observed during specific operation: 1. Do not look directly into the UV light source of the LED UV curing lamp for a long time. 2. Do not expose the skin to ultraviolet light for a long time. 3. Do not bend the cable of the polymerisation lamp frequently; 4. Do not disassemble the device as desired. Tips To achieve the best curing effect, you need to pay attention to two points: 1. The wavelength of the light curer contained in the UV adhesive must match the wavelength emitted by the UV lamp; 2. The ultraviolet energy emitted by the UV lamp must correspond to the energy required for curing the UV adhesive.; Note: Due to the light and screen resolution, pictures and real objects may have slight color differences. Please refer to real products. Manual measurement may vary a few centimetres from the actual distance. We describe the light effect performance, not the voltage power. Product advantages: widely used in UV glue, UV ink, UV varnish (for LED), UV pressure exposure, etc. Matters that require attention: The wavelength of the UV curing lamps manufactured by our factory is over 360nm, which is within the safe range, but the following points should be observed during specific operation: 1. Do not look directly into the UV light source of the LED UV curing lamp for a long time. 2. Do not expose the skin to ultraviolet light for a long time. 3. Do not bend the cable of the polymerisation lamp frequently; 4. Do not disassemble the device as desired. Tips To achieve the best curing effect, you need to pay attention to two points: 1. The wavelength of the light curer contained in the UV adhesive must match the wavelength emitted by the UV lamp; 2. The ultraviolet energy emitted by the UV lamp must correspond to the energy required for curing the UV adhesive.
|
