PURE SINE WAVE INVERTER 6200W 48V off-grid solar inverter built in 120A MPPT charge controller, pure sine wave inverter, single phase output 230V AC, 6.2kW all-in-one inverter, combines functions of inverter, solar charger and battery charger to provide uninterrupted power supply in a single package. Technical Parameters 120A MPPT solar charging inverter, max. PV array power: 6500 W, max. PV open circuit voltage: 450 Vdc; start voltage >90 V, max charging current: 120 A, PV array MPPT voltage range: 60 ~ 450 Vdc; cold start function (46 V). Improve user experience: AC input has a built-in air switch and surge protection, which is convenient for wiring and prevents surge impact on the power supply; battery input is equipped with an air switch, and PV input has a built-in lightning protection device that can effectively resist lightning strikes. The comprehensive protection configuration makes wiring easier and safer for users, reduces the risk of fire and ensures stable operation of the system. Two load outputs: adjustment range is from 40.0 V to 46.0 V for 6.2 kW model. Increment of each click is 0.1V. If the battery voltage falls below the setting range, the main OUT connector stops working. Only the Second Out Port works. For areas with frequent power outages and loads that cannot be darkened, you can adjust the battery voltage to 46V. Keep more battery capacity for emergencies. If the battery voltage is higher than 46V, the main out connector will continue to work. MULTIPLE USES ON/OFF Mains working mode, you can use inverter as energy storage without mains power (off grid). You may also want to reduce the household electricity bill through them (On Grid). Can be accessed a variety of household and office charges, including refrigerators, lamps, TVs, fans, air conditioners and other loads. 4 charging modes support: solar first, solar & utility and solar only. › See more product details; Product description Y&H can provide you with a battery pack. The battery capacity of the correct matching system is determined according to the specific usage requirements of the load and application scenarios, otherwise it will easily lead to insufficient battery capacity or excessive waste of power generation. For details, please refer to the manual recommendation or contact online customer service. Important note: 1. In utility bypass mode, the device cannot be connected to two-phase 220V AC, i.e. L1-L2 cannot be connected to L-N. 2. In inverter mode, after the device is connected to two-phase 220V, please do not choose a supply priority for the output priority, so as not to cause safety risks for the device. 3. Please do not connect the AC output of the device to the car transformer so as not to affect the normal life of the device. 4. (Single phase/A hot leg 230V output, can not output 110V AC). 5. This Y&H Off Grid Solar Inverter All-in-One does not support parallel operation and does not support phase separation. Description: This is a multi-function inverter/charger that combines functions of inverter, solar charger and battery charger to provide uninterrupted power supply with portable size. Its comprehensive LCD display provides user configurable and easily accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications. AC input and battery input. Built-in air switch. 1: The air switch can quickly disconnect the power supply if the circuit is overloaded or short circuited. 2:It can manually disconnect certain circuits when maintenance or troubleshooting is required. 3:Avoid accidental power backup or operation errors. AC input configuration surge protection. 1:Mains fluctuations, lightning strikes prevent temporary surge damage to devices: 2:Reduce the overvoltage caused by the aging of electronic components to extend the life of the devices: PV input integrated lightning protection device. Prevent lightning strikes from causing system current and voltage fluctuations, and improve stability. Reduces lightning overvoltage and thus extends the life of the devices. On-grid/off-grid solar inverter features: Pure sine wave solar power inverter (on/off mains) Output power factor: 1.0. WIFl&GPRS available for lOS and Android. Inverter can be operated without battery One-key factory recovery Built-in lithium battery, automatic activation. Two communication ports for battery communication and WiFi communication. Built-in 120A MPPT solar charging: max. 6200 W (for 4.2 kW), max. 6500W (for 6.2kW) High PV input voltage range (60~500V DC) Built-in anti-dust kit for harsh environments. Intelligent battery charging design to optimize battery life. Dual output (the second load output power can be adjusted from 20% to 70%); Product description Y&H can provide you with a battery pack. The battery capacity of the correct matching system is determined according to the specific usage requirements of the load and application scenarios, otherwise it will easily lead to insufficient battery capacity or excessive waste of power generation. For details, please refer to the manual recommendation or contact online customer service. Important note: 1. In utility bypass mode, the device cannot be connected to two-phase 220V AC, i.e. L1-L2 cannot be connected to L-N. 2. In inverter mode, after the device is connected to two-phase 220V, please do not choose a supply priority for the output priority, so as not to cause safety risks for the device. 3. Please do not connect the AC output of the device to the car transformer so as not to affect the normal life of the device. 4. (Single phase/A hot leg 230V output, can not output 110V AC). 5. This Y&H Off Grid Solar Inverter All-in-One does not support parallel operation and does not support phase separation. Description: This is a multi-function inverter/charger that combines functions of inverter, solar charger and battery charger to provide uninterrupted power supply with portable size. Its comprehensive LCD display provides user configurable and easily accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications. AC input and battery input. Built-in air switch. 1: The air switch can quickly disconnect the power supply if the circuit is overloaded or short circuited. 2:It can manually disconnect certain circuits when maintenance or troubleshooting is required. 3:Avoid accidental power backup or operation errors. AC input configuration surge protection. 1:Mains fluctuations, lightning strikes prevent temporary surge damage to devices: 2:Reduce the overvoltage caused by the aging of electronic components to extend the life of the devices: PV input integrated lightning protection device. Prevent lightning strikes from causing system current and voltage fluctuations, and improve stability. Reduces lightning overvoltage and thus extends the life of the devices. On-grid/off-grid solar inverter features: Pure sine wave solar power inverter (on/off mains) Output power factor: 1.0. WIFl&GPRS available for lOS and Android. Inverter can be operated without battery One-key factory recovery Built-in lithium battery, automatic activation. Two communication ports for battery communication and WiFi communication. Built-in 120A MPPT solar charging: max. 6200 W (for 4.2 kW), max. 6500W (for 6.2kW) High PV input voltage range (60~500V DC) Built-in anti-dust kit for harsh environments. Intelligent battery charging design to optimize battery life. Dual output (the second load output power can be adjusted from 20% to 70%); Y&H can provide you with a battery pack. The battery capacity of the correct matching system is determined according to the specific usage requirements of the load and application scenarios, otherwise it will easily lead to insufficient battery capacity or excessive waste of power generation. For details, please refer to the manual recommendation or contact online customer service. Important note: 1. In utility bypass mode, the device cannot be connected to two-phase 220V AC, i.e. L1-L2 cannot be connected to L-N. 2. In inverter mode, after the device is connected to two-phase 220V, please do not choose a supply priority for the output priority, so as not to cause safety risks for the device. 3. Please do not connect the AC output of the device to the car transformer so as not to affect the normal life of the device. 4. (Single phase/A hot leg 230V output, can not output 110V AC). 5. This Y&H Off Grid Solar Inverter All-in-One does not support parallel operation and does not support phase separation. Description: This is a multi-function inverter/charger that combines functions of inverter, solar charger and battery charger to provide uninterrupted power supply with portable size. Its comprehensive LCD display provides user configurable and easily accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications. AC input and battery input. Built-in air switch. 1: The air switch can quickly disconnect the power supply if the circuit is overloaded or short circuited. 2:It can manually disconnect certain circuits when maintenance or troubleshooting is required. 3:Avoid accidental power backup or operation errors. AC input configuration surge protection. 1:Mains fluctuations, lightning strikes prevent temporary surge damage to devices: 2:Reduce the overvoltage caused by the aging of electronic components to extend the life of the devices: PV input integrated lightning protection device. Prevent lightning strikes from causing system current and voltage fluctuations, and improve stability. Reduces lightning overvoltage and thus extends the life of the devices. On-grid/off-grid solar inverter features: Pure sine wave solar power inverter (on/off mains) Output power factor: 1.0. WIFl&GPRS available for lOS and Android. Inverter can be operated without battery One-key factory recovery Built-in lithium battery, automatic activation. Two communication ports for battery communication and WiFi communication. Built-in 120A MPPT solar charging: max. 6200 W (for 4.2 kW), max. 6500W (for 6.2kW) High PV input voltage range (60~500V DC) Built-in anti-dust kit for harsh environments. Intelligent battery charging design to optimize battery life. Dual output (the second load output power can be adjusted from 20% to 70%)
|
