There is no hysteresis effect, the phase error is almost zero, there is no magnetic saturation, and the linearity is good. The output signal is the difference between current and time. It can integrate the input current, the input current can really be restored, and the measuring current range can range from milliamPs to millions of amps. - Used for detecting AC leakage current, large current, harmonic current, complex waveform current, transient surge current, phase, electric current, power, power factor, etc. - Fr100r. Flexible coil current sensor coil body has no exposed metal conductors, non-contact measurements, safe and reliable; small size, light weight, exquisite appearance, soft and flexible, suitable for tight environments and dense cables - Easy to integrate with other devices, e.g. B. Electric energy meter field calibrator, electric energy meter with multiple electric energy meter, oscilloscope, digital multimeter, cable identification instrument, cable fault detector, double terminal ground resistance tester, double clamp phase voltage, digital current body, etc., can measure and compare various electrical parameters in a continuous state. › See more product details; Product description Special feature: - Range: 0A-10KA. -Output: 100mv / 1ka (optional integrator can be output to other parameters) - Diameter: φ100 mm, length: 315 mm. - Accuracy: 1%. -Connector: BNC optional banana plug audio plug Specification: Function: test current, high current, high harmonic current, complex waveform current, transient inrush current, phase, power, power, power factor, etc. Test mode: flexible Ct: the output signal is the current time differential. By integrating the output voltage signal, the input current can really be restored. Spool diameter: φ8 mm. Range: 0A-10KA. Output: 100mV/1ka (optional integrator can be adapted to other parameter outputs) Resolution: 0.1a Accuracy level: ± 1.0% Fs (50Hz / 60Hz); 23℃ ± 2℃, below 70%RF, the wire is in the middle of the coil) Phase error: ≤1 ° (50 Hz / 60 Hz; 23 °C ± 2 °C). Initial phase: 90°. Output interface: BNC. Plug (optional audio plug, banana plug, bare wire) Output cable length: 2 m. Electrical field interference: no hysteresis effect, no external electrical field interference Wire position: the wire tested is in the middle of the spool, and the position error affects: ≤ ± 0.3% fs Response frequency: 0.1Hz-10MHz. Mains voltage: bottom tested AC 1000V. Working temperature and humidity: -20 ℃ -50 ℃; below 80% RH. Storage temperature and humidity: -10 ℃ -60 ℃; below 70% RH. Insulation strength: AC 2000V. / RMS (both ends of the coil). Package list: Flexible coil current sensor x 1; Product description Special feature: - Range: 0A-10KA. -Output: 100mv / 1ka (optional integrator can be output to other parameters) - Diameter: φ100 mm, length: 315 mm. - Accuracy: 1%. -Connector: BNC optional banana plug audio plug Specification: Function: test current, high current, high harmonic current, complex waveform current, transient inrush current, phase, power, power, power factor, etc. Test mode: flexible Ct: the output signal is the current time differential. By integrating the output voltage signal, the input current can really be restored. Spool diameter: φ8 mm. Range: 0A-10KA. Output: 100mV/1ka (optional integrator can be adapted to other parameter outputs) Resolution: 0.1a Accuracy level: ± 1.0% Fs (50Hz / 60Hz); 23℃ ± 2℃, below 70%RF, the wire is in the middle of the coil) Phase error: ≤1 ° (50 Hz / 60 Hz; 23 °C ± 2 °C). Initial phase: 90°. Output interface: BNC. Plug (optional audio plug, banana plug, bare wire) Output cable length: 2 m. Electrical field interference: no hysteresis effect, no external electrical field interference Wire position: the wire tested is in the middle of the spool, and the position error affects: ≤ ± 0.3% fs Response frequency: 0.1Hz-10MHz. Mains voltage: bottom tested AC 1000V. Working temperature and humidity: -20 ℃ -50 ℃; below 80% RH. Storage temperature and humidity: -10 ℃ -60 ℃; below 70% RH. Insulation strength: AC 2000V. / RMS (both ends of the coil). Package list: Flexible coil current sensor x 1; Special feature: - Range: 0A-10KA. -Output: 100mv / 1ka (optional integrator can be output to other parameters) - Diameter: φ100 mm, length: 315 mm. - Accuracy: 1%. -Connector: BNC optional banana plug audio plug Specification: Function: test current, high current, high harmonic current, complex waveform current, transient inrush current, phase, power, power, power factor, etc. Test mode: flexible Ct: the output signal is the current time differential. By integrating the output voltage signal, the input current can really be restored. Spool diameter: φ8 mm. Range: 0A-10KA. Output: 100mV/1ka (optional integrator can be adapted to other parameter outputs) Resolution: 0.1a Accuracy level: ± 1.0% Fs (50Hz / 60Hz); 23℃ ± 2℃, below 70%RF, the wire is in the middle of the coil) Phase error: ≤1 ° (50 Hz / 60 Hz; 23 °C ± 2 °C). Initial phase: 90°. Output interface: BNC. Plug (optional audio plug, banana plug, bare wire) Output cable length: 2 m. Electrical field interference: no hysteresis effect, no external electrical field interference Wire position: the wire tested is in the middle of the spool, and the position error affects: ≤ ± 0.3% fs Response frequency: 0.1Hz-10MHz. Mains voltage: bottom tested AC 1000V. Working temperature and humidity: -20 ℃ -50 ℃; below 80% RH. Storage temperature and humidity: -10 ℃ -60 ℃; below 70% RH. Insulation strength: AC 2000V. / RMS (both ends of the coil). Package list: Flexible coil current sensor x 1
|
