★【Large LCD Screen & Monitor Flow Rate】: Support reading with liter or gallon unit, LPM/GPM switchable. DFC15 clearly displays the flow rate (the real-time liquid that happens per minute), the total volume of the flow and the measured temperature. ★【Quantity Control & Alarm Function】The controller automatically turns off the solenoid valve when the flow reaches the desired setting value. It is easy to install and control. It can automatically fill the water into your concrete mixer. When the total quantity reaches the setting value, the controller will be alerted. ★【Works with all Hall Effect Flow Sensor】: It can work with different flow sensors by adjusting the K value. High quality, with temperature sensor, can measure the liquid temperature. ★【Wide Applications】: swimming pool, water dispenser, coffee machine, drip irrigation system, home brewing, etc. For example, if you want 5 litres of water, you can set 5 litres of water on the DFC15 controller. When the water in the container reaches 5 liters, the controller regulates the solenoid valve to close it, the water flow stops automatically, and you will only receive 5 litres of water. Please choose a suitable flow meter. For liquids other than water, an oil flow meter is required. ★【Package includes】Thread type: BSP, but it can work with NPT thread. The regulator comes with a G1 inch flow sensor, a G1 inch solenoid valve (N/C), a temperature sensor (it can measure the liquid temperature) and a 12V DC power supply. 12 months warranty! › See more product details; Product description This DFC15 regulator is used to measure and control fluid flow. It can turn the solenoid valve on and off when the flow reaches the setting value. It is suitable for indoor effect flow sensor. Large LCD screen can display the flow rate, volume and temperature of the liquid. Features: Water meter: DFC15 can be used to measure water volume. ADJUSTABLE ACCURACY Calibrate accuracy by adjusting K parameter. Easy to read liquid crystal display on the front. Technical data: For DFC15 controller: Controller power supply: DC 12V Power Adapter: Input: 100-240V AC; Output: 12V DC, Max. 2A Adapter cable length: 1 m. Measurement accuracy: ±1% Output for solenoid valve: 12 V DC, max. 5A Temperature Sensor: 0-125℃/32-25℉, NTC3950, Accuracy: ±1℃/±1℉Thread: M8 Maximum total volume: 999999 G/L. Quantity Range: 0-9999.99g/L Flow Rate: 0-9999.99/LPM (GPM) Cable length: 1m Dimensions: 88mm x 126mm x 30mm. Weight: 200g Operating environment: Temperature: 0-50℃/32-122℉; Relative humidity: <85% For G1 flow sensor: Flow Rate:1-60L/min Compression allowed: water pressure below 1.75 MPa. Cable length: 15 cm. For solenoid valve G1 inch: G1 inch, Thread OD: 32.5mm Working Pressure: 0.02-0.8Mpa Working Voltage: DC 12V Note: 1. This regulator works with a solenoid valve up to 5A, but this kit comes with a 2A power supply. If you are driving a large solenoid valve, please use a suitable power supply. 2. Make sure the solenoid valve and the direction of the flow sensor are the same as the water flow. 3. Please use Teflon on the thread to ensure it does not leak. 4. The wires can be extended up to 10 m. 5. Avoid water entering the regulator. Package includes: 1 x DFC15 Controller 1 x G1\; Product description This DFC15 regulator is used to measure and control fluid flow. It can turn the solenoid valve on and off when the flow reaches the setting value. It is suitable for indoor effect flow sensor. Large LCD screen can display the flow rate, volume and temperature of the liquid. Features: Water meter: DFC15 can be used to measure water volume. ADJUSTABLE ACCURACY Calibrate accuracy by adjusting K parameter. Easy to read liquid crystal display on the front. Technical data: For DFC15 controller: Controller power supply: DC 12V Power Adapter: Input: 100-240V AC; Output: 12V DC, Max. 2A Adapter cable length: 1 m. Measurement accuracy: ±1% Output for solenoid valve: 12 V DC, max. 5A Temperature Sensor: 0-125℃/32-25℉, NTC3950, Accuracy: ±1℃/±1℉Thread: M8 Maximum total volume: 999999 G/L. Quantity Range: 0-9999.99g/L Flow Rate: 0-9999.99/LPM (GPM) Cable length: 1m Dimensions: 88mm x 126mm x 30mm. Weight: 200g Operating environment: Temperature: 0-50℃/32-122℉; Relative humidity: <85% For G1 flow sensor: Flow Rate:1-60L/min Compression allowed: water pressure below 1.75 MPa. Cable length: 15 cm. For solenoid valve G1 inch: G1 inch, Thread OD: 32.5mm Working Pressure: 0.02-0.8Mpa Working Voltage: DC 12V Note: 1. This regulator works with a solenoid valve up to 5A, but this kit comes with a 2A power supply. If you are driving a large solenoid valve, please use a suitable power supply. 2. Make sure the solenoid valve and the direction of the flow sensor are the same as the water flow. 3. Please use Teflon on the thread to ensure it does not leak. 4. The wires can be extended up to 10 m. 5. Avoid water entering the regulator. Package includes: 1 x DFC15 Controller 1 x G1\; This DFC15 regulator is used to measure and control fluid flow. It can turn the solenoid valve on and off when the flow reaches the setting value. It is suitable for indoor effect flow sensor. Large LCD screen can display the flow rate, volume and temperature of the liquid. Features: Water meter: DFC15 can be used to measure water volume. ADJUSTABLE ACCURACY Calibrate accuracy by adjusting K parameter. Easy to read liquid crystal display on the front. Technical data: For DFC15 controller: Controller power supply: DC 12V Power Adapter: Input: 100-240V AC; Output: 12V DC, Max. 2A Adapter cable length: 1 m. Measurement accuracy: ±1% Output for solenoid valve: 12 V DC, max. 5A Temperature Sensor: 0-125℃/32-25℉, NTC3950, Accuracy: ±1℃/±1℉Thread: M8 Maximum total volume: 999999 G/L. Quantity Range: 0-9999.99g/L Flow Rate: 0-9999.99/LPM (GPM) Cable length: 1m Dimensions: 88mm x 126mm x 30mm. Weight: 200g Operating environment: Temperature: 0-50℃/32-122℉; Relative humidity: <85% For G1 flow sensor: Flow Rate:1-60L/min Compression allowed: water pressure below 1.75 MPa. Cable length: 15 cm. For solenoid valve G1 inch: G1 inch, Thread OD: 32.5mm Working Pressure: 0.02-0.8Mpa Working Voltage: DC 12V Note: 1. This regulator works with a solenoid valve up to 5A, but this kit comes with a 2A power supply. If you are driving a large solenoid valve, please use a suitable power supply. 2. Make sure the solenoid valve and the direction of the flow sensor are the same as the water flow. 3. Please use Teflon on the thread to ensure it does not leak. 4. The wires can be extended up to 10 m. 5. Avoid water entering the regulator. Package includes: 1 x DFC15 Controller 1 x G1\
|
