[Precise Edge Measurement] Achieve unparalleled accuracy with the 001mm repeatability of our 3D photoelectric edge finder, precise alignment for all your editing needs. [Comprehensive Z Axis Measurement] Designed to provide extensive Z-axis measurements, this probe enhances your detection capabilities in various materials, including metal and wood. [Larger Probe Oscillation] The larger oscillation range prevents probe damage during operation and significantly extends the life of your devices. [Easy to use] Simply position the edge detector and approach the workpiece gradually for accurate measurements, making it user-friendly for both professionals and hobbyists. [Size Reminder] Please check your own measurement standards before use to maximize compatibility and performance. › See more product details; Product description Feature: * 3D photoelectric edge finder is a high-precision edge measurement product. * Higher alignment accuracy, repeatability up to 0.001mm * More comprehensive Z-axis measurement. * Probe is used for better accuracy retention. * Larger probe oscillation to prevent probe damage due to fault. * No need to use the conductive principle, and the measurement will not be impossible due to non-conductive materials or machine tool spindles. Technical data: Part name: 3D edge finder with probe. Product Model: MMP25 Repeatability: 0.001 Size: Standard Color: as picture show Detection direction: ±X ±Y +Z Probe safety path: ± 15° in X and Y planes, +5 mm in Z direction Trigger time: 5 million times. Power supply: 14250 lithium battery 3.6V Measurable insulation materials: metal, bakelite, wood, plastic, etc. Use of 3D photoelectric edge detector; Move the edge detector to the workpiece position according to the position of the workpiece to be measured and approach the workpiece gradually. 3D photoelectric edge detector setting. After installing the photoelectric 3D edge detector on the machine tool, turn the spindle to check the concentricity of the edge ball of the edge detector. Check the concentricity of the edge ball of the edge detector and adjust it with four forM3 adjusting screws until the concentricity reaches 0.01 mm. Adjust the edge ball of the edge detector with four forM3 adjusting screws until the concentricity reaches 0.01 mm, and then tighten the screws. After tightening the screws, the edge detector is ready to use. Package contents: 1 x MMP25 3D Photoelectric Edge Finder with Probe; Product description Feature: * 3D photoelectric edge finder is a high-precision edge measurement product. * Higher alignment accuracy, repeatability up to 0.001mm * More comprehensive Z-axis measurement. * Probe is used for better accuracy retention. * Larger probe oscillation to prevent probe damage due to fault. * No need to use the conductive principle, and the measurement will not be impossible due to non-conductive materials or machine tool spindles. Technical data: Part name: 3D edge finder with probe. Product Model: MMP25 Repeatability: 0.001 Size: Standard Color: as picture show Detection direction: ±X ±Y +Z Probe safety path: ± 15° in X and Y planes, +5 mm in Z direction Trigger time: 5 million times. Power supply: 14250 lithium battery 3.6V Measurable insulation materials: metal, bakelite, wood, plastic, etc. Use of 3D photoelectric edge detector; Move the edge detector to the workpiece position according to the position of the workpiece to be measured and approach the workpiece gradually. 3D photoelectric edge detector setting. After installing the photoelectric 3D edge detector on the machine tool, turn the spindle to check the concentricity of the edge ball of the edge detector. Check the concentricity of the edge ball of the edge detector and adjust it with four forM3 adjusting screws until the concentricity reaches 0.01 mm. Adjust the edge ball of the edge detector with four forM3 adjusting screws until the concentricity reaches 0.01 mm, and then tighten the screws. After tightening the screws, the edge detector is ready to use. Package contents: 1 x MMP25 3D Photoelectric Edge Finder with Probe; Feature: * 3D photoelectric edge finder is a high-precision edge measurement product. * Higher alignment accuracy, repeatability up to 0.001mm * More comprehensive Z-axis measurement. * Probe is used for better accuracy retention. * Larger probe oscillation to prevent probe damage due to fault. * No need to use the conductive principle, and the measurement will not be impossible due to non-conductive materials or machine tool spindles. Technical data: Part name: 3D edge finder with probe. Product Model: MMP25 Repeatability: 0.001 Size: Standard Color: as picture show Detection direction: ±X ±Y +Z Probe safety path: ± 15° in X and Y planes, +5 mm in Z direction Trigger time: 5 million times. Power supply: 14250 lithium battery 3.6V Measurable insulation materials: metal, bakelite, wood, plastic, etc. Use of 3D photoelectric edge detector; Move the edge detector to the workpiece position according to the position of the workpiece to be measured and approach the workpiece gradually. 3D photoelectric edge detector setting. After installing the photoelectric 3D edge detector on the machine tool, turn the spindle to check the concentricity of the edge ball of the edge detector. Check the concentricity of the edge ball of the edge detector and adjust it with four forM3 adjusting screws until the concentricity reaches 0.01 mm. Adjust the edge ball of the edge detector with four forM3 adjusting screws until the concentricity reaches 0.01 mm, and then tighten the screws. After tightening the screws, the edge detector is ready to use. Package contents: 1 x MMP25 3D Photoelectric Edge Finder with Probe
|
