Perfect for wooden studios and laboratories and can support your DIY creations and processing. The high locking strength of the bench drill ensures stability and stability and ensures higher precision. The bench drill has fast heat dissipation to lower the internal temperature of the machine, ensuring a long service life. The integrated work light, extendable telescopic rod and LED digital screen can perfectly help you complete the drilling work more efficiently. Can be placed in your wood studio, laboratory or workshop to meet your DIY creation and processing needs. › See more product details; Product description The bench drill is a small drill that is widely used. The motor drives the runner through five-stage speed changes, allowing the spindle to change five speeds. The headstock can be moved up and down on the cylindrical column and can be rotated to any position around the centre of the cylindrical column for machining. After adjusting the appropriate position, lock it with the handle. If the head frame needs to be lowered, first adjust the safety ring to the appropriate position, lock it with a set screw, then loosen the handle, let the head frame fall into the safe environment due to its own weight and then tighten the handle. The workbench can be moved up and down on the round column. And can be rotated around the column to any position. When the locking screw of the locking handle of the workbench base is loosened, the workbench can be tilted 45° left and right in the vertical plane. If the workpiece is small, it can be drilled on the workbench. For larger workpieces, the workpiece table can be turned away and placed directly on the floor of the drill for drilling. Motor power: 375 W. Speed: 1100-4500 RPM Drill Diameter: 1.5-13mm Weight: 17 kg. Maximum spindle travel: 250 mm. Maintenance 1. Before Work 1) Check all operating handles, switches and knobs for correct position, flexible operation and completeness and reliability of safety devices. 2) Add lubricating oil (grease) depending on the lubrication needs. 3) Turn on the power and run 3-5mm long at low speed. Only after confirming that it is normal can you start working. 2. At work 1) It is strictly prohibited to overload the machine tool or to perform machining beyond the possibilities. 2) The machine must be stopped for loading and unloading the drill. The drill can only be installed after cleaning the cone surface and must be securely attached. When disassembling drill and drill chuck, they should be carefully tapped with a special inclined iron and copper hammer. 3) Attach workpiece and tool properly. 4) It is strictly forbidden to work with gloves. 5) If an anomaly occurs during the operation of the machine tool, the machine should be stopped immediately to identify and eliminate the error. 3. workbench 1) All handles must be put into the \; Product description The bench drill is a small drill that is widely used. The motor drives the runner through five-stage speed changes, allowing the spindle to change five speeds. The headstock can be moved up and down on the cylindrical column and can be rotated to any position around the centre of the cylindrical column for machining. After adjusting the appropriate position, lock it with the handle. If the head frame needs to be lowered, first adjust the safety ring to the appropriate position, lock it with a set screw, then loosen the handle, let the head frame fall into the safe environment due to its own weight and then tighten the handle. The workbench can be moved up and down on the round column. And can be rotated around the column to any position. When the locking screw of the locking handle of the workbench base is loosened, the workbench can be tilted 45° left and right in the vertical plane. If the workpiece is small, it can be drilled on the workbench. For larger workpieces, the workpiece table can be turned away and placed directly on the floor of the drill for drilling. Motor power: 375 W. Speed: 1100-4500 RPM Drill Diameter: 1.5-13mm Weight: 17 kg. Maximum spindle travel: 250 mm. Maintenance 1. Before Work 1) Check all operating handles, switches and knobs for correct position, flexible operation and completeness and reliability of safety devices. 2) Add lubricating oil (grease) depending on the lubrication needs. 3) Turn on the power and run 3-5mm long at low speed. Only after confirming that it is normal can you start working. 2. At work 1) It is strictly prohibited to overload the machine tool or to perform machining beyond the possibilities. 2) The machine must be stopped for loading and unloading the drill. The drill can only be installed after cleaning the cone surface and must be securely attached. When disassembling drill and drill chuck, they should be carefully tapped with a special inclined iron and copper hammer. 3) Attach workpiece and tool properly. 4) It is strictly forbidden to work with gloves. 5) If an anomaly occurs during the operation of the machine tool, the machine should be stopped immediately to identify and eliminate the error. 3. workbench 1) All handles must be put into the \; The bench drill is a small drill that is widely used. The motor drives the runner through five-stage speed changes, allowing the spindle to change five speeds. The headstock can be moved up and down on the cylindrical column and can be rotated to any position around the centre of the cylindrical column for machining. After adjusting the appropriate position, lock it with the handle. If the head frame needs to be lowered, first adjust the safety ring to the appropriate position, lock it with a set screw, then loosen the handle, let the head frame fall into the safe environment due to its own weight and then tighten the handle. The workbench can be moved up and down on the round column. And can be rotated around the column to any position. When the locking screw of the locking handle of the workbench base is loosened, the workbench can be tilted 45° left and right in the vertical plane. If the workpiece is small, it can be drilled on the workbench. For larger workpieces, the workpiece table can be turned away and placed directly on the floor of the drill for drilling. Motor power: 375 W. Speed: 1100-4500 RPM Drill Diameter: 1.5-13mm Weight: 17 kg. Maximum spindle travel: 250 mm. Maintenance 1. Before Work 1) Check all operating handles, switches and knobs for correct position, flexible operation and completeness and reliability of safety devices. 2) Add lubricating oil (grease) depending on the lubrication needs. 3) Turn on the power and run 3-5mm long at low speed. Only after confirming that it is normal can you start working. 2. At work 1) It is strictly prohibited to overload the machine tool or to perform machining beyond the possibilities. 2) The machine must be stopped for loading and unloading the drill. The drill can only be installed after cleaning the cone surface and must be securely attached. When disassembling drill and drill chuck, they should be carefully tapped with a special inclined iron and copper hammer. 3) Attach workpiece and tool properly. 4) It is strictly forbidden to work with gloves. 5) If an anomaly occurs during the operation of the machine tool, the machine should be stopped immediately to identify and eliminate the error. 3. workbench 1) All handles must be put into the \
|
