180V to 280V OUTPUT This network port micro inverter supports a 10.8V to 30V DC input to an AC output of 180V to 280V.Solar inverters are mains connected inverters that need to be connected to the network before they can be connected to household appliances. The micro inverter can achieve maximum power point monitoring, which maximizes the total output power. DC to AC This inverter for connecting to the solar network is a device that converts the DC of the solar panel to AC. The volume and capacity are low, the capacity is between 0.2 and 1.6 kW. The micro inverter can control each component independently, minimizing potential safety risks. ALUMINUM ALLOY This solar micro inverter is made of premium aluminum alloy, which ensures long service life. This device is a micro inverter, in order to work properly, it must be properly connected to the mains and the mains works perfectly. When the power grid stops working, it will also stop generating. Multiple Protection This solar power connection inverter has island protection, voltage protection, frequency protection, temperature protection, current protection, etc. When you extend the solar panel cable. You need to be careful with this problem. Keep away from direct sunlight and direct rain. (ventilated, dry, cool) Note: This micro grid tie inverter can only be used with solar panels and cannot be used with batteries. Before use, make sure that the VOC no-load voltage and VMP working voltage of the photovoltaic module match the input voltage and working voltage range of this device › See more product details; Product description Features: Element Type: Solar Power Inverter Material: Aluminum Alloy Inverter box size: approx. 10 x 7.5 x 3.5 cm / 3.94 x 2.95 x 1.38 inches. Output voltage waveform: sine wave Photovoltaic output (DC): Input plug: 1 set. MPPT Voltage Range: 12.5V to 25V Operating voltage: 10.8V to 30V Maximum input voltage: 30 V. Starting voltage: 10.8 V. Maximum input power: 150 W Maximum input current: 9.37 A AC Output(AC): Single-phase power type: 230 V. Nominal output power: 130 W Maximum output power: 140 W AC rated current: 230 V: 0.56 A. Rated voltage: AC 230 V. Output voltage range: 230 V AC: 180 V to 280 V Rated frequency AC: 50/60 Hz. Output frequency range: 50Hz: 47.5 to 52.5Hz/60Hz: 57.5 to 62.5Hz Output power factor: >0.99 Efficiency: The highest conversion efficiency: 92.5% CEC Weighted Efficiency: 230V AC: 91.5% MPPT: Monitoring efficiency: 99.9%. Night loss: <700 mW. Temperature range: minus 40°C to 65°C (ambient temperature)/minus 40°C to +85°C (storage temperature). Waterproof: IP55 Communication: none Protection mode: island protection, voltage protection, frequency protection, temperature protection, current protection, etc. Full Grounding The PE end of the AC cable is the ground wire of the device, and there are no other ground connectors. List of packages: 1 x solar power inverter, 1 x user manual (English language not guaranteed). 1 x AC cable.; Product description Features: Element Type: Solar Power Inverter Material: Aluminum Alloy Inverter box size: approx. 10 x 7.5 x 3.5 cm / 3.94 x 2.95 x 1.38 inches. Output voltage waveform: sine wave Photovoltaic output (DC): Input plug: 1 set. MPPT Voltage Range: 12.5V to 25V Operating voltage: 10.8V to 30V Maximum input voltage: 30 V. Starting voltage: 10.8 V. Maximum input power: 150 W Maximum input current: 9.37 A AC Output(AC): Single-phase power type: 230 V. Nominal output power: 130 W Maximum output power: 140 W AC rated current: 230 V: 0.56 A. Rated voltage: AC 230 V. Output voltage range: 230 V AC: 180 V to 280 V Rated frequency AC: 50/60 Hz. Output frequency range: 50Hz: 47.5 to 52.5Hz/60Hz: 57.5 to 62.5Hz Output power factor: >0.99 Efficiency: The highest conversion efficiency: 92.5% CEC Weighted Efficiency: 230V AC: 91.5% MPPT: Monitoring efficiency: 99.9%. Night loss: <700 mW. Temperature range: minus 40°C to 65°C (ambient temperature)/minus 40°C to +85°C (storage temperature). Waterproof: IP55 Communication: none Protection mode: island protection, voltage protection, frequency protection, temperature protection, current protection, etc. Full Grounding The PE end of the AC cable is the ground wire of the device, and there are no other ground connectors. List of packages: 1 x solar power inverter, 1 x user manual (English language not guaranteed). 1 x AC cable.; Features: Element Type: Solar Power Inverter Material: Aluminum Alloy Inverter box size: approx. 10 x 7.5 x 3.5 cm / 3.94 x 2.95 x 1.38 inches. Output voltage waveform: sine wave Photovoltaic output (DC): Input plug: 1 set. MPPT Voltage Range: 12.5V to 25V Operating voltage: 10.8V to 30V Maximum input voltage: 30 V. Starting voltage: 10.8 V. Maximum input power: 150 W Maximum input current: 9.37 A AC Output(AC): Single-phase power type: 230 V. Nominal output power: 130 W Maximum output power: 140 W AC rated current: 230 V: 0.56 A. Rated voltage: AC 230 V. Output voltage range: 230 V AC: 180 V to 280 V Rated frequency AC: 50/60 Hz. Output frequency range: 50Hz: 47.5 to 52.5Hz/60Hz: 57.5 to 62.5Hz Output power factor: >0.99 Efficiency: The highest conversion efficiency: 92.5% CEC Weighted Efficiency: 230V AC: 91.5% MPPT: Monitoring efficiency: 99.9%. Night loss: <700 mW. Temperature range: minus 40°C to 65°C (ambient temperature)/minus 40°C to +85°C (storage temperature). Waterproof: IP55 Communication: none Protection mode: island protection, voltage protection, frequency protection, temperature protection, current protection, etc. Full Grounding The PE end of the AC cable is the ground wire of the device, and there are no other ground connectors. List of packages: 1 x solar power inverter, 1 x user manual (English language not guaranteed). 1 x AC cable.
|
