A 1 x 20/24-pin power supply tester for the ATX / SATA / HDD power supply. Prevent electrical disasters by regularly testing the power supplies to detect problems before they damage your computer and monitor the voltage output. The green LED lights up when your device is working properly. This new ATX power supply tester can test 4PIN / 6PIN / 8PIN hard drive power connectors and 20PIN / 24PIN FLOPPY (very powerful). Robust plug-in plastic case for testing PC 20/24 pin, power supply, ATX, SATA and hard drive. › See more product details; Product description Technical data: Material: ABSSize: Approx. 7 × 5 × 2 cm / 2.76 × 1.97 × 0.79 inchColor: Black Package list: 1 x power supply tester. Note: Performance Tester Instructions: Turn on the power to be tested. Plug the 24-pin (20-pin) connector of the power supply to be tested into the 24-pin (20-pin) socket that corresponds to the performance tester. Check that the seven indicators are on the right (+3.3, -12V, PG, +5V, +12V, -5V, +5V). Plug the HDD connector to be tested into the HDD socket of the power tester to determine whether the two LEDs are on the left (+12, +5V). All LEDs light up perfectly. Pull the connector of the hard drive out of the power supply and plug the P4 (P6 / P8) plug into the corresponding socket P4 (P6 / P8) to check whether the left (+12 V) is lit. Pull the P4 (P6 / P8) connector from the current tester and then plug the floppy plug (floppy drive) into the corresponding FLOPPY sock, To check whether the two lights on the left (+12 V, +5 V) all light is good, pull the FLOPPY connector from the power tester and plug the SATA plug into the corresponding SATA socket to check whether the three indicators on the left (+12 V, +3.3 V, +5 V) light up BR>; Product description Technical data: Material: ABSSize: Approx. 7 × 5 × 2 cm / 2.76 × 1.97 × 0.79 inchColor: Black Package list: 1 x power supply tester. Note: Performance Tester Instructions: Turn on the power to be tested. Plug the 24-pin (20-pin) connector of the power supply to be tested into the 24-pin (20-pin) socket that corresponds to the performance tester. Check that the seven indicators are on the right (+3.3, -12V, PG, +5V, +12V, -5V, +5V). Plug the HDD connector to be tested into the HDD socket of the power tester to determine whether the two LEDs are on the left (+12, +5V). All LEDs light up perfectly. Pull the connector of the hard drive out of the power supply and plug the P4 (P6 / P8) plug into the corresponding socket P4 (P6 / P8) to check whether the left (+12 V) is lit. Pull the P4 (P6 / P8) connector from the current tester and then plug the floppy plug (floppy drive) into the corresponding FLOPPY sock, To check whether the two lights on the left (+12 V, +5 V) all light is good, pull the FLOPPY connector from the power tester and plug the SATA plug into the corresponding SATA socket to check whether the three indicators on the left (+12 V, +3.3 V, +5 V) light up BR>; Technical data: Material: ABSSize: Approx. 7 × 5 × 2 cm / 2.76 × 1.97 × 0.79 inchColor: Black Package list: 1 x power supply tester. Note: Performance Tester Instructions: Turn on the power to be tested. Plug the 24-pin (20-pin) connector of the power supply to be tested into the 24-pin (20-pin) socket that corresponds to the performance tester. Check that the seven indicators are on the right (+3.3, -12V, PG, +5V, +12V, -5V, +5V). Plug the HDD connector to be tested into the HDD socket of the power tester to determine whether the two LEDs are on the left (+12, +5V). All LEDs light up perfectly. Pull the connector of the hard drive out of the power supply and plug the P4 (P6 / P8) plug into the corresponding socket P4 (P6 / P8) to check whether the left (+12 V) is lit. Pull the P4 (P6 / P8) connector from the current tester and then plug the floppy plug (floppy drive) into the corresponding FLOPPY sock, To check whether the two lights on the left (+12 V, +5 V) all light is good, pull the FLOPPY connector from the power tester and plug the SATA plug into the corresponding SATA socket to check whether the three indicators on the left (+12 V, +3.3 V, +5 V) light up BR>
|
