Aluminium alloy material: lightweight but robust construction with high durability for outdoor use [RS485 OUTPUT FORM] RS485 output for reliable connectivity and data transfer [POWER SOURCE] DC 9-30V power supply for versatile installation options [HIGH RESOLUTION] Measures radiation energy in the wavelength band of 400-700nm with a resolution of 1W/m2 Response time: Fast response time of ≤ 5 ms for accurate and timely data readings › See more product details; Product description 1. IP67 PROTECTION: IP67 waterproof, moisture-proof, erosion-resistant, suitable for outdoor rain and snow environments, long service life, can work stably for a long time. 2. Full aluminium housing: it is equipped with a full aluminium housing, which is stable, heat resistant and not easy to age and ensures the long-term stability and reliability of the sensor. Sturdy structure and good sealing, long service life, high measurement accuracy, strong stability and strong ability to avoid external interference. 3. Widely applicable: it can be widely used in the environment, agricultural fields, aquaculture, greenhouses, laboratories and other occasions where measurement of photosynthetically active radiation is required. 4. Function: The sensor is an instrument for measuring the radiation energy of a certain band (wavelength 400nm to 700nm) in the solar radiation spectrum, which can be absorbed, converted and used for the synthesis of organic substances by plant plasma emma pigments. 5. Effective photosynthetic radiation: photosynthetically effective radiation, defined as radiation in the wavelength range of 400 to 700 nm, is an important energy source for plant growth activities, synthesis of organic matter and yield formation. The five photosynthetic reactions of plants, photosynthesis, pigment synthesis, photoperiodic phenomena, phototropism, and photomorphogenic mutagenesis, focus on the wavelength range of 400 to 700 nm. Technical data: Item Type:Photosynthetic Sensor Transmitter Material: aluminium alloy. Weight: approx. 292 g / 10.3 oz. Product size: approx. 65 x 31 mm / 2.6 x 1.2 inches. Mounting Hole Distance: 57mm Power supply: DC 9-30V Output form: RS485. Spectrum Range: 400-700nm Range: 0-1500 W/m2 (or 0-5000 umol*m-2*s-1) Resolution: 1W/m2 (O umol*m-2*s-1) Response time: ≤5ms (95%) Non-linearity: ±4%. Directional behavior (corrected within 80° of the zenith angle): ±10%. Temperature behaviour (-20°C to 60°C): ±5%. Annual stability: ±3%. Spectrum response bandwidth: (400±10) nm - (700±10) nm Spectrum selectivity error: ±5. Reaction outside the specified bandwidth: ≤ 10% Protection class: IP67. Operating Temperature: -40-80°C Relative Humidity: 0-100%RH Power consumption: ≤ 100 mW 5 V. Troubleshooting: The counter display value is incorrect when output. This may be due to wiring problems or communication errors of the serial port, which causes the correct data to be retrieved. Check whether the wiring is correct and fixed, whether the serial port is occupied and whether the configuration of the serial port is correct. Wiring: Output signal: RS485 Red wire: positive performance. Black cable: A+ Yellow Cable: B Green wire: negative current. Application: 1. Attach the sensor to the mounting plate with screws through the sensor mounting holes. 2. Make sure the device is parallel to (tighten the thumb screws and check the status of the leveling bubble to determine if it is parallel). Box contents: 1 x photosynthetic sensor transmitter with cable. 1 x user manual. Notes: 1. Check if the packaging is intact and whether the product model matches the selection. 2. Do not connect the device to the mains supply. Before switching on, check whether the wiring is complete. 3. The length of the sensor cable affects the output signal of the product. Please do not change the product when you use it. 4. The sensor is a sensitive device. Therefore, users should not disassemble it and do not touch the surface of the sensor with sharp objects or erosive liquids so as not to damage the product.; Product description 1. IP67 PROTECTION: IP67 waterproof, moisture-proof, erosion-resistant, suitable for outdoor rain and snow environments, long service life, can work stably for a long time. 2. Full aluminium housing: it is equipped with a full aluminium housing, which is stable, heat resistant and not easy to age and ensures the long-term stability and reliability of the sensor. Sturdy structure and good sealing, long service life, high measurement accuracy, strong stability and strong ability to avoid external interference. 3. Widely applicable: it can be widely used in the environment, agricultural fields, aquaculture, greenhouses, laboratories and other occasions where measurement of photosynthetically active radiation is required. 4. Function: The sensor is an instrument for measuring the radiation energy of a certain band (wavelength 400nm to 700nm) in the solar radiation spectrum, which can be absorbed, converted and used for the synthesis of organic substances by plant plasma emma pigments. 5. Effective photosynthetic radiation: photosynthetically effective radiation, defined as radiation in the wavelength range of 400 to 700 nm, is an important energy source for plant growth activities, synthesis of organic matter and yield formation. The five photosynthetic reactions of plants, photosynthesis, pigment synthesis, photoperiodic phenomena, phototropism, and photomorphogenic mutagenesis, focus on the wavelength range of 400 to 700 nm. Technical data: Item Type:Photosynthetic Sensor Transmitter Material: aluminium alloy. Weight: approx. 292 g / 10.3 oz. Product size: approx. 65 x 31 mm / 2.6 x 1.2 inches. Mounting Hole Distance: 57mm Power supply: DC 9-30V Output form: RS485. Spectrum Range: 400-700nm Range: 0-1500 W/m2 (or 0-5000 umol*m-2*s-1) Resolution: 1W/m2 (O umol*m-2*s-1) Response time: ≤5ms (95%) Non-linearity: ±4%. Directional behavior (corrected within 80° of the zenith angle): ±10%. Temperature behaviour (-20°C to 60°C): ±5%. Annual stability: ±3%. Spectrum response bandwidth: (400±10) nm - (700±10) nm Spectrum selectivity error: ±5. Reaction outside the specified bandwidth: ≤ 10% Protection class: IP67. Operating Temperature: -40-80°C Relative Humidity: 0-100%RH Power consumption: ≤ 100 mW 5 V. Troubleshooting: The counter display value is incorrect when output. This may be due to wiring problems or communication errors of the serial port, which causes the correct data to be retrieved. Check whether the wiring is correct and fixed, whether the serial port is occupied and whether the configuration of the serial port is correct. Wiring: Output signal: RS485 Red wire: positive performance. Black cable: A+ Yellow Cable: B Green wire: negative current. Application: 1. Attach the sensor to the mounting plate with screws through the sensor mounting holes. 2. Make sure the device is parallel to (tighten the thumb screws and check the status of the leveling bubble to determine if it is parallel). Box contents: 1 x photosynthetic sensor transmitter with cable. 1 x user manual. Notes: 1. Check if the packaging is intact and whether the product model matches the selection. 2. Do not connect the device to the mains supply. Before switching on, check whether the wiring is complete. 3. The length of the sensor cable affects the output signal of the product. Please do not change the product when you use it. 4. The sensor is a sensitive device. Therefore, users should not disassemble it and do not touch the surface of the sensor with sharp objects or erosive liquids so as not to damage the product.; 1. IP67 PROTECTION: IP67 waterproof, moisture-proof, erosion-resistant, suitable for outdoor rain and snow environments, long service life, can work stably for a long time. 2. Full aluminium housing: it is equipped with a full aluminium housing, which is stable, heat resistant and not easy to age and ensures the long-term stability and reliability of the sensor. Sturdy structure and good sealing, long service life, high measurement accuracy, strong stability and strong ability to avoid external interference. 3. Widely applicable: it can be widely used in the environment, agricultural fields, aquaculture, greenhouses, laboratories and other occasions where measurement of photosynthetically active radiation is required. 4. Function: The sensor is an instrument for measuring the radiation energy of a certain band (wavelength 400nm to 700nm) in the solar radiation spectrum, which can be absorbed, converted and used for the synthesis of organic substances by plant plasma emma pigments. 5. Effective photosynthetic radiation: photosynthetically effective radiation, defined as radiation in the wavelength range of 400 to 700 nm, is an important energy source for plant growth activities, synthesis of organic matter and yield formation. The five photosynthetic reactions of plants, photosynthesis, pigment synthesis, photoperiodic phenomena, phototropism, and photomorphogenic mutagenesis, focus on the wavelength range of 400 to 700 nm. Technical data: Item Type:Photosynthetic Sensor Transmitter Material: aluminium alloy. Weight: approx. 292 g / 10.3 oz. Product size: approx. 65 x 31 mm / 2.6 x 1.2 inches. Mounting Hole Distance: 57mm Power supply: DC 9-30V Output form: RS485. Spectrum Range: 400-700nm Range: 0-1500 W/m2 (or 0-5000 umol*m-2*s-1) Resolution: 1W/m2 (O umol*m-2*s-1) Response time: ≤5ms (95%) Non-linearity: ±4%. Directional behavior (corrected within 80° of the zenith angle): ±10%. Temperature behaviour (-20°C to 60°C): ±5%. Annual stability: ±3%. Spectrum response bandwidth: (400±10) nm - (700±10) nm Spectrum selectivity error: ±5. Reaction outside the specified bandwidth: ≤ 10% Protection class: IP67. Operating Temperature: -40-80°C Relative Humidity: 0-100%RH Power consumption: ≤ 100 mW 5 V. Troubleshooting: The counter display value is incorrect when output. This may be due to wiring problems or communication errors of the serial port, which causes the correct data to be retrieved. Check whether the wiring is correct and fixed, whether the serial port is occupied and whether the configuration of the serial port is correct. Wiring: Output signal: RS485 Red wire: positive performance. Black cable: A+ Yellow Cable: B Green wire: negative current. Application: 1. Attach the sensor to the mounting plate with screws through the sensor mounting holes. 2. Make sure the device is parallel to (tighten the thumb screws and check the status of the leveling bubble to determine if it is parallel). Box contents: 1 x photosynthetic sensor transmitter with cable. 1 x user manual. Notes: 1. Check if the packaging is intact and whether the product model matches the selection. 2. Do not connect the device to the mains supply. Before switching on, check whether the wiring is complete. 3. The length of the sensor cable affects the output signal of the product. Please do not change the product when you use it. 4. The sensor is a sensitive device. Therefore, users should not disassemble it and do not touch the surface of the sensor with sharp objects or erosive liquids so as not to damage the product.
|
