15.4 W output: This POE extender has 1 POE input and 1 POE output, input supports 48 V POE IEEE802.3 af/at standard. The output can supply IEEE802.3af [15.4W] power for POE devices such as POE camera/PTZ/Voip phone/AP Up to 240 m extension: POE extender supports 120 m (393 ft) input extension, 120 m (393 ft) output extension. Total 240 m extension. Automatic detection: Automatic detection and connection, protects PoE devices from damage caused by incorrect installation. Low cost: The cost-effective installation of the POE extender requires no local power supply or other additional costs. Powered by POE input, plug and play, no additional configuration required. 【High Compatibility】The POE extender can forward Ethernet and POE power for 1 end device via a Cat5, Cat5e, Cat6, Cat6e and UTP cable (less than 120 m). › See more product details; Product description Note: 1. To prevent water from entering the extender, please store the PoE extender in a damp environment. 2. Suggest using PoE extender indoors. If you install the extender outdoors, please install it in a waterproof place. PoE Extender is a cost-effective way to extend the Ethernet network range beyond 100 m and deliver data and power to network devices such as WLAN access points and network cameras over a distance of 200 m, while meeting IEEE PoE and data standards. The PoE Extender supports 10/100Mbps data rates and delivers 802.3af power levels of up to 15.4W. The PoE extender requires no local power supply and is powered by the PoE input. Extended PoE installation range by another 100 m Supports 10/100Mbps data rates. - Provides 802.3af power level when powered by an 802.3at source - Extenders can be cascaded to reach up to 700m - Cost-effective installation - no local power required - Plug and play installation - no configuration required Other specifications: PoE input: 1 RJ45 port (DC 44-57V) PoE output: 1 RJ45 port (48V) PoE pin output: 1/2 (+), 3/6 (-); max power 15 W. Network media: Cat5 or better UTP cable (less than 120m) Repeater mode: save and forward. MAC address table: 2K Packet buffer memory: 48 bytes Switching capacity: 400Mbps PoE standard: IEEE 802.3af Input power: 13 watts. Output power: 12.2 watts. Power supply type: 1/2+, 3/6, Mode A, End Span Network Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x Flow Control, IEEE 802.3af Power Over Ethernet; Working temperature: -10 °C to 45 °C. Dimensions: 75 x 37 x 26.5 mm. Weight: 60 g. Package Content: 1 x POE extender 100 Mbps (POE5002); Product description Note: 1. To prevent water from entering the extender, please store the PoE extender in a damp environment. 2. Suggest using PoE extender indoors. If you install the extender outdoors, please install it in a waterproof place. PoE Extender is a cost-effective way to extend the Ethernet network range beyond 100 m and deliver data and power to network devices such as WLAN access points and network cameras over a distance of 200 m, while meeting IEEE PoE and data standards. The PoE Extender supports 10/100Mbps data rates and delivers 802.3af power levels of up to 15.4W. The PoE extender requires no local power supply and is powered by the PoE input. Extended PoE installation range by another 100 m Supports 10/100Mbps data rates. - Provides 802.3af power level when powered by an 802.3at source - Extenders can be cascaded to reach up to 700m - Cost-effective installation - no local power required - Plug and play installation - no configuration required Other specifications: PoE input: 1 RJ45 port (DC 44-57V) PoE output: 1 RJ45 port (48V) PoE pin output: 1/2 (+), 3/6 (-); max power 15 W. Network media: Cat5 or better UTP cable (less than 120m) Repeater mode: save and forward. MAC address table: 2K Packet buffer memory: 48 bytes Switching capacity: 400Mbps PoE standard: IEEE 802.3af Input power: 13 watts. Output power: 12.2 watts. Power supply type: 1/2+, 3/6, Mode A, End Span Network Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x Flow Control, IEEE 802.3af Power Over Ethernet; Working temperature: -10 °C to 45 °C. Dimensions: 75 x 37 x 26.5 mm. Weight: 60 g. Package Content: 1 x POE extender 100 Mbps (POE5002); Note: 1. To prevent water from entering the extender, please store the PoE extender in a damp environment. 2. Suggest using PoE extender indoors. If you install the extender outdoors, please install it in a waterproof place. PoE Extender is a cost-effective way to extend the Ethernet network range beyond 100 m and deliver data and power to network devices such as WLAN access points and network cameras over a distance of 200 m, while meeting IEEE PoE and data standards. The PoE Extender supports 10/100Mbps data rates and delivers 802.3af power levels of up to 15.4W. The PoE extender requires no local power supply and is powered by the PoE input. Extended PoE installation range by another 100 m Supports 10/100Mbps data rates. - Provides 802.3af power level when powered by an 802.3at source - Extenders can be cascaded to reach up to 700m - Cost-effective installation - no local power required - Plug and play installation - no configuration required Other specifications: PoE input: 1 RJ45 port (DC 44-57V) PoE output: 1 RJ45 port (48V) PoE pin output: 1/2 (+), 3/6 (-); max power 15 W. Network media: Cat5 or better UTP cable (less than 120m) Repeater mode: save and forward. MAC address table: 2K Packet buffer memory: 48 bytes Switching capacity: 400Mbps PoE standard: IEEE 802.3af Input power: 13 watts. Output power: 12.2 watts. Power supply type: 1/2+, 3/6, Mode A, End Span Network Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x Flow Control, IEEE 802.3af Power Over Ethernet; Working temperature: -10 °C to 45 °C. Dimensions: 75 x 37 x 26.5 mm. Weight: 60 g. Package Content: 1 x POE extender 100 Mbps (POE5002)
|
