1. Made of high-quality material, the clamp head has no exposed metal, non-contact measurement, ensuring safe operation and long service life. 2. Support for data storage, data hold and low voltage indication function. Small size and perfect function, easy to operate and easy to carry. 3. With a measuring range of 0.0A-600A and a resolution of 0.1A, it has high accuracy and is an indispensable tool for electrical safety testing. 4. Support automatic power off function, after 5 minutes of power on, this AC DC clamp meter automatically shuts down to reduce battery consumption. 5. It can be widely used in electric power, communication, meteorology, railway, oil field, construction, measurement, scientific research and teaching institutions, industrial and mining fields. Herzlich willkommen und ich wünsche Ihnen ein glückliches Leben, mein Freund. › See more product details; Product description Spezifikation:Zustand: 100% brandneuItem Type: Clamp MeterMaterial: AbsProduktgröße: ca. 185 x 50 x 31 mm / 7.3 x 2 x 1.2 inGewicht ca. 326g / 11.5ozModell :ETCR6100Jaw Size:Approx. 30 x 35 mm / 1.2 x 1.4 inBereich :DC/AC 0.0A-600AAccuracy:±2%rdg, ±3%dgtResolution:0.1AData Interface:RS232Working Current:10mAFunctions:DC current, AC current measurement, peak hold, online monitoringPower Supply:Alkaline dry battery 6F22 9V (not included), continuous use for 15 hoursTest Method:Clamp CT, non-contact measurementDisplay Mode:4-digit LCD Anzeige LCD Größe: ca. 32 x 15 mm / 1.3 x 0.6 inFrequency Response:Exchange: 4 5HZ-400HZSampling Rate:2 times / secPolarity Indication:Automatic identification when DC current detection, display ''-''Wire Position:The detected wire is at the center of the jaw, and the maximum deviation from the center position is increased.Shift:Full automatic switchingLine Voltage Line test below 600VSoftware:Yes, the data stored in the meter can be uploaded to the computer via software.Data Storage 99 groups, flashing ' 'VOLL'' indicates that the storage is fullPeak Hold:Peak capture hold function, long press HALT button during test without release, it will show peak valueData Hold:Data hold function: display ''DH''Out of Range Display:Out of range function: display ''OL''Automatic Power Off:After 5 minutes of power on, the meter automatically shuts down to reduce battery consumption.Battery Voltage:When the battery voltage drops to 7.2V, the battery voltage low sign is displayed, reminding to replace the battery.Working Temperature and Humidity -10~50; unter 80%relativer RHTemperature Error:Limit temperature error -10~0 and 40~50, the maximum error increases by 1%rdgStorage Temperature and Humidity -10~60 70%rh belowInsulation Strength:AC2kV/rms (between the iron core and the outer housing)Paketliste:1 x Clamp Meter (Battery Not Included)1 x Bedienungsanleitung1 x Cloth Bag1 x VGA Kabel; Product description Spezifikation:Zustand: 100% brandneuItem Type: Clamp MeterMaterial: AbsProduktgröße: ca. 185 x 50 x 31 mm / 7.3 x 2 x 1.2 inGewicht ca. 326g / 11.5ozModell :ETCR6100Jaw Size:Approx. 30 x 35 mm / 1.2 x 1.4 inBereich :DC/AC 0.0A-600AAccuracy:±2%rdg, ±3%dgtResolution:0.1AData Interface:RS232Working Current:10mAFunctions:DC current, AC current measurement, peak hold, online monitoringPower Supply:Alkaline dry battery 6F22 9V (not included), continuous use for 15 hoursTest Method:Clamp CT, non-contact measurementDisplay Mode:4-digit LCD Anzeige LCD Größe: ca. 32 x 15 mm / 1.3 x 0.6 inFrequency Response:Exchange: 4 5HZ-400HZSampling Rate:2 times / secPolarity Indication:Automatic identification when DC current detection, display ''-''Wire Position:The detected wire is at the center of the jaw, and the maximum deviation from the center position is increased.Shift:Full automatic switchingLine Voltage Line test below 600VSoftware:Yes, the data stored in the meter can be uploaded to the computer via software.Data Storage 99 groups, flashing ' 'VOLL'' indicates that the storage is fullPeak Hold:Peak capture hold function, long press HALT button during test without release, it will show peak valueData Hold:Data hold function: display ''DH''Out of Range Display:Out of range function: display ''OL''Automatic Power Off:After 5 minutes of power on, the meter automatically shuts down to reduce battery consumption.Battery Voltage:When the battery voltage drops to 7.2V, the battery voltage low sign is displayed, reminding to replace the battery.Working Temperature and Humidity -10~50; unter 80%relativer RHTemperature Error:Limit temperature error -10~0 and 40~50, the maximum error increases by 1%rdgStorage Temperature and Humidity -10~60 70%rh belowInsulation Strength:AC2kV/rms (between the iron core and the outer housing)Paketliste:1 x Clamp Meter (Battery Not Included)1 x Bedienungsanleitung1 x Cloth Bag1 x VGA Kabel; Spezifikation:Zustand: 100% brandneuItem Type: Clamp MeterMaterial: AbsProduktgröße: ca. 185 x 50 x 31 mm / 7.3 x 2 x 1.2 inGewicht ca. 326g / 11.5ozModell :ETCR6100Jaw Size:Approx. 30 x 35 mm / 1.2 x 1.4 inBereich :DC/AC 0.0A-600AAccuracy:±2%rdg, ±3%dgtResolution:0.1AData Interface:RS232Working Current:10mAFunctions:DC current, AC current measurement, peak hold, online monitoringPower Supply:Alkaline dry battery 6F22 9V (not included), continuous use for 15 hoursTest Method:Clamp CT, non-contact measurementDisplay Mode:4-digit LCD Anzeige LCD Größe: ca. 32 x 15 mm / 1.3 x 0.6 inFrequency Response:Exchange: 4 5HZ-400HZSampling Rate:2 times / secPolarity Indication:Automatic identification when DC current detection, display ''-''Wire Position:The detected wire is at the center of the jaw, and the maximum deviation from the center position is increased.Shift:Full automatic switchingLine Voltage Line test below 600VSoftware:Yes, the data stored in the meter can be uploaded to the computer via software.Data Storage 99 groups, flashing ' 'VOLL'' indicates that the storage is fullPeak Hold:Peak capture hold function, long press HALT button during test without release, it will show peak valueData Hold:Data hold function: display ''DH''Out of Range Display:Out of range function: display ''OL''Automatic Power Off:After 5 minutes of power on, the meter automatically shuts down to reduce battery consumption.Battery Voltage:When the battery voltage drops to 7.2V, the battery voltage low sign is displayed, reminding to replace the battery.Working Temperature and Humidity -10~50; unter 80%relativer RHTemperature Error:Limit temperature error -10~0 and 40~50, the maximum error increases by 1%rdgStorage Temperature and Humidity -10~60 70%rh belowInsulation Strength:AC2kV/rms (between the iron core and the outer housing)Paketliste:1 x Clamp Meter (Battery Not Included)1 x Bedienungsanleitung1 x Cloth Bag1 x VGA Kabel
|
