Multi-mode digital support: fully supports DMR, D-STAR, YSF, P25, NXDN, and POCSAG modes with cross-mode capabilities (YSF2DMR, YSF2NXDN, YSF2P25, DMR2YSF, DMR2NXDN), allowing seamless communication between digital radios. Dual Network Connectivity: Built-in 2.4GHz WiFi and newly added Ethernet port for flexible internet connection. Easily connect to your router via LAN cable or mobile hotspot. Preloaded & Preconfigured: Comes with Pi-Star 4.2 software pre-installed on a high-speed Class 10 TF card. Device is set to simplex mode, OLED3, and STM32 GPIO type.With temporary WiFi SSID:m100, password:abc12345. Easy to set up. Enhanced Performance: Equipped with TCXO for high RF accuracy and stability. Includes heatsink for improved Raspbery Pi thermal management. OLED screen displays call sign, mode, talk group, and more. Complete Kit & Quality Service: Includes hotspot board, Raspbery Pi Zero W, antenna, aluminum case, USB cable, Ethernet Wlan Expansion board, and user manual. Fully assembled with firmware pre-loaded. Support response time within 6 hours. › See more product details; Product description The MM100 MMDVM Hotspot is an all-in-one digital voice modem solution, ideal for ham radio operators who want to communicate across multiple digital voice modes including DMR, D-STAR, YSF, P25, NXDN, and POCSAG. Whether you're working portable or setting up a home station, this upgraded model ensures reliable, cross-compatible communication. What's New in the MM100: 1.Ethernet Capability: In addition to WiFi, we've added an EthernetWlan Expansionboard so you can connect directly to your router via network cable—no need to configure WiFi if preferred. 2.Better Heat Dissipation: A dedicated heatsink is now attached to the Raspberry Pi processor for improved thermal control and system stability. Improved status display: the aluminium shell features clearly labeled LED indicators and a two-colour OLED screen (yellow & blue) for easy real-time monitoring. Optimised software setup: comes pre-installed with Pi-Star 4.2 on a high-speed C10 TF card. Default settings (simplex mode, OLED3, STM32 GPIO, temporary WiFi credentials) are already configured to save you time. Product Specifications: Built-in 802.11b/g/n WiFi and Ethernet WiFi expansion board. OLED display (pre-installed). Console SSH access on port 22 Up to 10 mW RF output via SMA antenna High-performance 32-bit ARM CPU, quad-core 1.2GHz 512 MB DDR3 RAM and TF card included. Package lists: 1 x MMDVM hotspot board. Raspbery Pi Zero W × 1 OLED display (Installed) x 1. C10 TF card with Pi Star 4.2 x 1. 1 x 433 MHz UHF antenna. 1 x aluminium case. 1 x USB cable. 1 x Ethernet WiFi expansion board. 1 x 90° SMA connector. 1 x user manual. Login information: User name: pi-star. Pasword: raspberry. Note: All designs are open-source contributions to the MMDVM project.; Product description The MM100 MMDVM Hotspot is an all-in-one digital voice modem solution, ideal for ham radio operators who want to communicate across multiple digital voice modes including DMR, D-STAR, YSF, P25, NXDN, and POCSAG. Whether you're working portable or setting up a home station, this upgraded model ensures reliable, cross-compatible communication. What's New in the MM100: 1.Ethernet Capability: In addition to WiFi, we've added an EthernetWlan Expansionboard so you can connect directly to your router via network cable—no need to configure WiFi if preferred. 2.Better Heat Dissipation: A dedicated heatsink is now attached to the Raspberry Pi processor for improved thermal control and system stability. Improved status display: the aluminium shell features clearly labeled LED indicators and a two-colour OLED screen (yellow & blue) for easy real-time monitoring. Optimised software setup: comes pre-installed with Pi-Star 4.2 on a high-speed C10 TF card. Default settings (simplex mode, OLED3, STM32 GPIO, temporary WiFi credentials) are already configured to save you time. Product Specifications: Built-in 802.11b/g/n WiFi and Ethernet WiFi expansion board. OLED display (pre-installed). Console SSH access on port 22 Up to 10 mW RF output via SMA antenna High-performance 32-bit ARM CPU, quad-core 1.2GHz 512 MB DDR3 RAM and TF card included. Package lists: 1 x MMDVM hotspot board. Raspbery Pi Zero W × 1 OLED display (Installed) x 1. C10 TF card with Pi Star 4.2 x 1. 1 x 433 MHz UHF antenna. 1 x aluminium case. 1 x USB cable. 1 x Ethernet WiFi expansion board. 1 x 90° SMA connector. 1 x user manual. Login information: User name: pi-star. Pasword: raspberry. Note: All designs are open-source contributions to the MMDVM project.; The MM100 MMDVM Hotspot is an all-in-one digital voice modem solution, ideal for ham radio operators who want to communicate across multiple digital voice modes including DMR, D-STAR, YSF, P25, NXDN, and POCSAG. Whether you're working portable or setting up a home station, this upgraded model ensures reliable, cross-compatible communication. What's New in the MM100: 1.Ethernet Capability: In addition to WiFi, we've added an EthernetWlan Expansionboard so you can connect directly to your router via network cable—no need to configure WiFi if preferred. 2.Better Heat Dissipation: A dedicated heatsink is now attached to the Raspberry Pi processor for improved thermal control and system stability. Improved status display: the aluminium shell features clearly labeled LED indicators and a two-colour OLED screen (yellow & blue) for easy real-time monitoring. Optimised software setup: comes pre-installed with Pi-Star 4.2 on a high-speed C10 TF card. Default settings (simplex mode, OLED3, STM32 GPIO, temporary WiFi credentials) are already configured to save you time. Product Specifications: Built-in 802.11b/g/n WiFi and Ethernet WiFi expansion board. OLED display (pre-installed). Console SSH access on port 22 Up to 10 mW RF output via SMA antenna High-performance 32-bit ARM CPU, quad-core 1.2GHz 512 MB DDR3 RAM and TF card included. Package lists: 1 x MMDVM hotspot board. Raspbery Pi Zero W × 1 OLED display (Installed) x 1. C10 TF card with Pi Star 4.2 x 1. 1 x 433 MHz UHF antenna. 1 x aluminium case. 1 x USB cable. 1 x Ethernet WiFi expansion board. 1 x 90° SMA connector. 1 x user manual. Login information: User name: pi-star. Pasword: raspberry. Note: All designs are open-source contributions to the MMDVM project.
|
