Nano heat spray and nano cold spray: the hot air opens the tight pores and allows better penetration of the water molecules into the underlying skin layers, so that oil and dirt are deeply cleansed and the skin is moisturised and rejuvenated at the same time. The cold air narrows the pores and soothes the skin, so you can safely survive sensitive skin periods. PTC heating technology: with the improved PTC heating technology, you can spray and care for your skin even more gently. With the innovative PTC heating technology, you can say goodbye to limescale deposits and no longer have to worry about cleaning the device. Intelligent touch screen: This face steamer has a clear display and flexible buttons. You can clearly see the working status of the device on the display, and the flexible controls make it even more comfortable to use. Height and angle adjustable: the cold and hot nozzle can be rotated 360° and 270° separately, and the height of the item can also be adjusted from 33.5 inches to 47.6 inches, so you can choose whether to sit or lie down for a comfortable facial treatment. Safe and stable: the face sauna steam machine has four wheels and a sturdy frame with crossed legs so that it cannot easily tip over. And when the device runs out of water, it automatically shuts off to protect people and the device from danger. › See more product details; Product description Product description Application: Suitable for both beginners and professional beauticians to use in beauty salons, studios, home, etc. How to use: 1. Open the water filler nozzle. 2. Slowly add water and make sure that the water level does not exceed the upper limit, then cover the water filler. 3. Connect the device to the power supply and press the switch for the hot spray and germicidal light, and adjust the switch for the cold spray and cold light. 4. Adjust the position and wait a while for the mist to escape. Specification Model: PTC338 Colour: white. Item type: facial steamer machine. Power: 750 W. Water tank capacity: 1000 ml/33.81 oz. Spray time: 30 minutes. Material: plastic, hardware. Plug voltage: 220 V. Plug type: EU plug. Gross weight: 5 kg/11.02 lbs. Net weight: 4.8 kg/10.58 lbs. Height: 68 cm/26.8 inches. Adjustable height: 85-121 cm/33.5-47.6 inches. Height of water tank: 17.5 cm/6.9 inches. Water reservoir width: 15.7 cm/6.2 inches. Length of hot water jet tube: 23.5 cm/9.3 inches. Length of hot nozzle: 16.5 cm/6.5 inches. Length of cold jet tube: 32.5 cm/12.8 inches. Length of cold nozzle: 16.5 cm/6.5 inches. Package size: 69*28*21.5cm/27.17*11.02*8.46in Package includes: 1 x facial steamer. 1 x Chinese and English manual. Notes: 1. If the new device triggers an alarm while it contains water, there may be two reasons: the water level is too high or too low, and the pH of the water does not comply with the standard. 2. It is recommended to use tap water for the first three times, then distilled water or pure water can be used. 3. Please allow slight colour difference due to the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind this before ordering. Safety Warning 1. If the new device triggers an alarm while it contains water, there may be two reasons: the water level is too high or too low, and the pH of the water does not comply with the standard. 2. It is recommended to use tap water for the first three times, then distilled water or pure water can be used. 3. Please allow slight colour difference due to the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind this before ordering.; Product description Product description Application: Suitable for both beginners and professional beauticians to use in beauty salons, studios, home, etc. How to use: 1. Open the water filler nozzle. 2. Slowly add water and make sure that the water level does not exceed the upper limit, then cover the water filler. 3. Connect the device to the power supply and press the switch for the hot spray and germicidal light, and adjust the switch for the cold spray and cold light. 4. Adjust the position and wait a while for the mist to escape. Specification Model: PTC338 Colour: white. Item type: facial steamer machine. Power: 750 W. Water tank capacity: 1000 ml/33.81 oz. Spray time: 30 minutes. Material: plastic, hardware. Plug voltage: 220 V. Plug type: EU plug. Gross weight: 5 kg/11.02 lbs. Net weight: 4.8 kg/10.58 lbs. Height: 68 cm/26.8 inches. Adjustable height: 85-121 cm/33.5-47.6 inches. Height of water tank: 17.5 cm/6.9 inches. Water reservoir width: 15.7 cm/6.2 inches. Length of hot water jet tube: 23.5 cm/9.3 inches. Length of hot nozzle: 16.5 cm/6.5 inches. Length of cold jet tube: 32.5 cm/12.8 inches. Length of cold nozzle: 16.5 cm/6.5 inches. Package size: 69*28*21.5cm/27.17*11.02*8.46in Package includes: 1 x facial steamer. 1 x Chinese and English manual. Notes: 1. If the new device triggers an alarm while it contains water, there may be two reasons: the water level is too high or too low, and the pH of the water does not comply with the standard. 2. It is recommended to use tap water for the first three times, then distilled water or pure water can be used. 3. Please allow slight colour difference due to the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind this before ordering. Safety Warning 1. If the new device triggers an alarm while it contains water, there may be two reasons: the water level is too high or too low, and the pH of the water does not comply with the standard. 2. It is recommended to use tap water for the first three times, then distilled water or pure water can be used. 3. Please allow slight colour difference due to the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind this before ordering.; Product description Application: Suitable for both beginners and professional beauticians to use in beauty salons, studios, home, etc. How to use: 1. Open the water filler nozzle. 2. Slowly add water and make sure that the water level does not exceed the upper limit, then cover the water filler. 3. Connect the device to the power supply and press the switch for the hot spray and germicidal light, and adjust the switch for the cold spray and cold light. 4. Adjust the position and wait a while for the mist to escape. Specification Model: PTC338 Colour: white. Item type: facial steamer machine. Power: 750 W. Water tank capacity: 1000 ml/33.81 oz. Spray time: 30 minutes. Material: plastic, hardware. Plug voltage: 220 V. Plug type: EU plug. Gross weight: 5 kg/11.02 lbs. Net weight: 4.8 kg/10.58 lbs. Height: 68 cm/26.8 inches. Adjustable height: 85-121 cm/33.5-47.6 inches. Height of water tank: 17.5 cm/6.9 inches. Water reservoir width: 15.7 cm/6.2 inches. Length of hot water jet tube: 23.5 cm/9.3 inches. Length of hot nozzle: 16.5 cm/6.5 inches. Length of cold jet tube: 32.5 cm/12.8 inches. Length of cold nozzle: 16.5 cm/6.5 inches. Package size: 69*28*21.5cm/27.17*11.02*8.46in Package includes: 1 x facial steamer. 1 x Chinese and English manual. Notes: 1. If the new device triggers an alarm while it contains water, there may be two reasons: the water level is too high or too low, and the pH of the water does not comply with the standard. 2. It is recommended to use tap water for the first three times, then distilled water or pure water can be used. 3. Please allow slight colour difference due to the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind this before ordering. Safety Warning 1. If the new device triggers an alarm while it contains water, there may be two reasons: the water level is too high or too low, and the pH of the water does not comply with the standard. 2. It is recommended to use tap water for the first three times, then distilled water or pure water can be used. 3. Please allow slight colour difference due to the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind this before ordering.
|
