Voice dialer with alarm repeat The Terxon PSTN dialer sends recorded voice dialers to previously defined telephone numbers when controlling inputs. You can either connect the device to an alarm panel or operate it as a single device. Analogue 4 inputs (NC/NO) The Terxon PSTN dialer has 4 alarm inputs, which you can assign a voice message to anyone, for example input A = fire, B = raid, C burglary, D = technical alarm. The alarm inputs A-D are assigned to voice messages A, B, C and D. 4 contact numbers: The Terxon PSTN dialer dials up to four 24-digit phone numbers in case of alarm and transmits the corresponding message texts. The general identification message is played beforehand for all voice messages 4 voice messages plus 1 identification message. The integrated microphone and speaker allow you to record and play up to 4 voice messages and a general identification message. Each message can have a length of 25 seconds › See more product details; Product description PSTN Dialer As soon as a detector triggers an alarm in your building, your alarm center will know the current state. With the PSTN dialer, this information is passed on to up to four telephone numbers you have stored in advance. In the event of an alarm, the analogue voice dialer transmits two information: an identification text and an event text. The identification text transmits general data (name, address), the event text you defined events (burglary, fire, medical emergency, system disruption, etc?). You can record and save any four event texts. The texts have a total duration of 40 seconds. The analogue voice selector is mounted between alarm system and telephone line. It has four inputs that activate the event text provided in the event of an alarm. The dialling of the phone numbers is done automatically by the voice dialler. So you can be sure that the recipients are reliably informed. The programming of the dialing device is menu-guided via an LCD display. The analogue voice dialer is approved throughout Europe and thanks to its elegant white optics matches the Terxon alarm panel. Display: illuminated segment display. Inputs: 4 positive/negative controllable inputs (5-28 V DC). Outputs • 1 transistor output (OP), negative switching, max. Current output: 100 mA. Dial process; tone selection method (MVF); pulse selection procedure. Telephone number storage locations • 4. Transmission path: PSTN. Transmission type: language. Number of voice messages • 4. Recording time: 40 seconds maximum (total). Programming • Menu Remote access: yes. Sabotage monitoring: yes. Connections, screw terminal for PSTN and power supply. Power supply: 11.5 to 14 VDC. Power consumption, standby: 35 mA/12 V DC, in operation: 70 mA/12 V DC. Housing material: ABS. Operating temperature: -10 °C to +55 °C. Dimensions (W x H x D): 150 x 115 x 30 mm. Weight: 360 g.; Product description PSTN Dialer As soon as a detector triggers an alarm in your building, your alarm center will know the current state. With the PSTN dialer, this information is passed on to up to four telephone numbers you have stored in advance. In the event of an alarm, the analogue voice dialer transmits two information: an identification text and an event text. The identification text transmits general data (name, address), the event text you defined events (burglary, fire, medical emergency, system disruption, etc?). You can record and save any four event texts. The texts have a total duration of 40 seconds. The analogue voice selector is mounted between alarm system and telephone line. It has four inputs that activate the event text provided in the event of an alarm. The dialling of the phone numbers is done automatically by the voice dialler. So you can be sure that the recipients are reliably informed. The programming of the dialing device is menu-guided via an LCD display. The analogue voice dialer is approved throughout Europe and thanks to its elegant white optics matches the Terxon alarm panel. Display: illuminated segment display. Inputs: 4 positive/negative controllable inputs (5-28 V DC). Outputs • 1 transistor output (OP), negative switching, max. Current output: 100 mA. Dial process; tone selection method (MVF); pulse selection procedure. Telephone number storage locations • 4. Transmission path: PSTN. Transmission type: language. Number of voice messages • 4. Recording time: 40 seconds maximum (total). Programming • Menu Remote access: yes. Sabotage monitoring: yes. Connections, screw terminal for PSTN and power supply. Power supply: 11.5 to 14 VDC. Power consumption, standby: 35 mA/12 V DC, in operation: 70 mA/12 V DC. Housing material: ABS. Operating temperature: -10 °C to +55 °C. Dimensions (W x H x D): 150 x 115 x 30 mm. Weight: 360 g.; PSTN Dialer As soon as a detector triggers an alarm in your building, your alarm center will know the current state. With the PSTN dialer, this information is passed on to up to four telephone numbers you have stored in advance. In the event of an alarm, the analogue voice dialer transmits two information: an identification text and an event text. The identification text transmits general data (name, address), the event text you defined events (burglary, fire, medical emergency, system disruption, etc?). You can record and save any four event texts. The texts have a total duration of 40 seconds. The analogue voice selector is mounted between alarm system and telephone line. It has four inputs that activate the event text provided in the event of an alarm. The dialling of the phone numbers is done automatically by the voice dialler. So you can be sure that the recipients are reliably informed. The programming of the dialing device is menu-guided via an LCD display. The analogue voice dialer is approved throughout Europe and thanks to its elegant white optics matches the Terxon alarm panel. Display: illuminated segment display. Inputs: 4 positive/negative controllable inputs (5-28 V DC). Outputs • 1 transistor output (OP), negative switching, max. Current output: 100 mA. Dial process; tone selection method (MVF); pulse selection procedure. Telephone number storage locations • 4. Transmission path: PSTN. Transmission type: language. Number of voice messages • 4. Recording time: 40 seconds maximum (total). Programming • Menu Remote access: yes. Sabotage monitoring: yes. Connections, screw terminal for PSTN and power supply. Power supply: 11.5 to 14 VDC. Power consumption, standby: 35 mA/12 V DC, in operation: 70 mA/12 V DC. Housing material: ABS. Operating temperature: -10 °C to +55 °C. Dimensions (W x H x D): 150 x 115 x 30 mm. Weight: 360 g.
|
