Scope of application: the controller set is suitable for electric skateboard drive systems, is compatible with hub motor 70, 83, 90, 100 and 120 and works with 36 V. It can also be suitable for flight model motor Dual Drive Construction The electric skateboard controller features powerful chips and electronic components as well as dual drive construction, which ensures stable and reliable control performance. It comes with a portable remote control, has an ergonomic shape and sits very well in the hand Remote control function: remote control with LED indicator, which shows the signal status, speed modes and battery level. 4 different speed modes: high speed sports mode, high speed saving mode, medium speed mode, low speed mode Multiple Protection Electric longboard controllers have multiple protection functions such as over voltage, undervoltage, over temperature and blocking, which ensure stable performance support Stable and Reliable This electric skateboard control system has EMP control module with remote control module. It can do everything that even an ESC can do. An ESC can be easily damaged, but this motherboard is more stable and reliable › See more product details; Product description Features: 1. Durable The solid structure of the motherboard can greatly extend the service life. With remote receiver module, allowing remote control. Easy to install, but requires expertise Technical data: Double drive: approx. 100 x 76 x 18 mm / 3.9 x 3 x 0.7 inches. Voltage: 36V Current: 12A Maximum speed: 3000 rpm. Maximum power: 430W (36V) Drive mode: sine wave FOC with soft start. Maximum speed: 35 km/h. Protection: Over voltage, under voltage, over temperature, blocking, CWCCW, speed control Detection method: reverb Load capacity: ≤120 kg. Power connection: XT60. Motor plug: 4mm banana plug Hall Interface: 5 Pin 2.0 Male Size: approx. 18.5 x 10 x 4 cm / 7.28 x 3.94 x 1.57 inches. Weight: approx. 227 g. Package includes: 1 x controller. 1 x remote control transmitter. 1 x LED battery indicator. 1 x switch. 1 x USB cable. Note: 1. No installation instructions are included, use by professional personnel is highly recommended. The remote control fits the main controller with a signal description: 1. Connect the main control to the power supply. 2. The power supply is turned on, wait two seconds and then hold the button for about 6 seconds. Wait until the switch indicator flashes. 3. Turn on the remote control switch and press the button in the small opening in the lower left corner of the remote control with a small screwdriver. 4. The remote control is turned off for two seconds and then switched on again. Wait until the remote control indicator and switch indicator flash at the same time to indicate that the pairing was successful.; Product description Features: 1. Durable The solid structure of the motherboard can greatly extend the service life. With remote receiver module, allowing remote control. Easy to install, but requires expertise Technical data: Double drive: approx. 100 x 76 x 18 mm / 3.9 x 3 x 0.7 inches. Voltage: 36V Current: 12A Maximum speed: 3000 rpm. Maximum power: 430W (36V) Drive mode: sine wave FOC with soft start. Maximum speed: 35 km/h. Protection: Over voltage, under voltage, over temperature, blocking, CWCCW, speed control Detection method: reverb Load capacity: ≤120 kg. Power connection: XT60. Motor plug: 4mm banana plug Hall Interface: 5 Pin 2.0 Male Size: approx. 18.5 x 10 x 4 cm / 7.28 x 3.94 x 1.57 inches. Weight: approx. 227 g. Package includes: 1 x controller. 1 x remote control transmitter. 1 x LED battery indicator. 1 x switch. 1 x USB cable. Note: 1. No installation instructions are included, use by professional personnel is highly recommended. The remote control fits the main controller with a signal description: 1. Connect the main control to the power supply. 2. The power supply is turned on, wait two seconds and then hold the button for about 6 seconds. Wait until the switch indicator flashes. 3. Turn on the remote control switch and press the button in the small opening in the lower left corner of the remote control with a small screwdriver. 4. The remote control is turned off for two seconds and then switched on again. Wait until the remote control indicator and switch indicator flash at the same time to indicate that the pairing was successful.; Features: 1. Durable The solid structure of the motherboard can greatly extend the service life. With remote receiver module, allowing remote control. Easy to install, but requires expertise Technical data: Double drive: approx. 100 x 76 x 18 mm / 3.9 x 3 x 0.7 inches. Voltage: 36V Current: 12A Maximum speed: 3000 rpm. Maximum power: 430W (36V) Drive mode: sine wave FOC with soft start. Maximum speed: 35 km/h. Protection: Over voltage, under voltage, over temperature, blocking, CWCCW, speed control Detection method: reverb Load capacity: ≤120 kg. Power connection: XT60. Motor plug: 4mm banana plug Hall Interface: 5 Pin 2.0 Male Size: approx. 18.5 x 10 x 4 cm / 7.28 x 3.94 x 1.57 inches. Weight: approx. 227 g. Package includes: 1 x controller. 1 x remote control transmitter. 1 x LED battery indicator. 1 x switch. 1 x USB cable. Note: 1. No installation instructions are included, use by professional personnel is highly recommended. The remote control fits the main controller with a signal description: 1. Connect the main control to the power supply. 2. The power supply is turned on, wait two seconds and then hold the button for about 6 seconds. Wait until the switch indicator flashes. 3. Turn on the remote control switch and press the button in the small opening in the lower left corner of the remote control with a small screwdriver. 4. The remote control is turned off for two seconds and then switched on again. Wait until the remote control indicator and switch indicator flash at the same time to indicate that the pairing was successful.
|
![Pack of 10 Dimmable G9 Halogen Bulbs, 40 W 230 V 2800 K G9 Halogen Bulbs for Oven Lamp, Ceiling Lights, Candlesticks [Energy Class F]](https://anete.shop/image/cache/catalog/ext4oc/90/19083374_-9007480-238x238.jpg)
