Unleash your digital SLR camera with this ¿digital zoom lens The 18-200 mm Di II is in the tradition of the legendary Tamron Megazoom lenses and has an 11.1x zoom that corresponds to a focal length range of 28-300 mm on analogue 3-frame cameras Especially when travelling, the ultra-compact and lightweight design ensures unclouded photo fun It achieves an image scale of 1:3.7 and is therefore also suitable for macro shots. The closest focusing distance is 45 cm 7 aperture slats › See more product details; Product description Product Description AF18-200 mm - Technical features Tamron AF 18-200 mm F/3.5-6.3 XR Di II LD Aspherical [IF] Macro. 3-4x focal length range and 11.1x zoom Tamrons AF 18-200 mm - the digital revoluzoom Thanks to its very large focal length range, the 18-200mm is suitable as a standard lens for virtually all photographic occasions. Especially when travelling, the ultra-compact and lightweight design ensures undisturbed photo fun. From wide angle to telephoto range, you can master many photographic situations with this lens. The 18-200mm Di II is in the tradition of the legendary Tamron Megazoom lenses and has an 11.1x zoom that corresponds to a focal length range of 28-300mm on full-frame cameras. The AF18-200mm Di II works with innovative XR lenses (Extra Refractive Index) to optimize the distribution of optical power throughout the focal length range. This design reduces various imaging errors to the absolute minimum and at the same time allows a much more compact design. In addition, three aspherical hybrid elements to prevent spherical aberration and two elements made of LD (low dispersion) glass are used to compensate for chromatic aberration. The result is a versatile zoom lens with outstanding optical quality. It achieves an image scale of 1:3.7 and is therefore also suitable for macro shots, with a closest focusing distance of only 45cm. Experience the versatility of a new lens standard with fantastic value for money. The 18-200 mm is also available since March 2008 with a built-in motor for the Nikon D40, D40X and the D60 (item no. A14NII). The previous version has item no. A14N and is not suitable for the D40, D40X and the D60. Phherical and aspherical lens. Aspherical hybrid elements Thanks to innovative production techniques, we are now increasingly using aspherical lenses. These lenses, in general, have a surface that differs from the spherical shape. Especially the opening error and coma correction can be greatly improved with these aspheres. In addition, the distortion of lenses can be compensated by aspheres. During production, a special plastic is bonded to the glass surface and thus the asphere. Tamron masters this technology perfectly and uses these lenses on many of his lenses. Next to the standing image illustrates the difference between a spherical and an aspherical lens. The yellow marked part is a high quality plastic that connects to the spherical glass body. Image circle for Di II lenses Full-frame sensor Di II lenses are designed exclusively for digital SLR cameras with image sensors up to a size of 24x16mm. The optical systems of these lenses have been optimally matched to the performance characteristics of digital SLR cameras. The lenses are characterised by: - High resolution - Minimises light drop towards the edge. - Optimization of stray light behaviour. - Minimize chromatic aberration. For example, a highly efficient multiple coating was applied to the lens surfaces as well as in some cases a so-called internal coating, in which glued glass elements are coated. This ensures an effective reduction of stray light, especially occurring with digital image sensors. At the same time, the edge light drop has been minimised, so that digital images are evenly illuminated from the centre of the image to the corners. The Di II lenses are now offered in all focal length ranges preferred by users of digital SLR cameras. Please note that Di II generation lenses are only suitable for digital cameras with a sensor size of no more than 16 x 24 mm and can be used with full-frame sensors or small image SLR cameras, otherwise there will be vignetting at the edges. Legal Disclaimer Used goods. For this article, the difference taxation applies (§ 25 a para. 2 UStG), so that the applicable VAT cannot be shown separately.; Product description Product Description AF18-200 mm - Technical features Tamron AF 18-200 mm F/3.5-6.3 XR Di II LD Aspherical [IF] Macro. 3-4x focal length range and 11.1x zoom Tamrons AF 18-200 mm - the digital revoluzoom Thanks to its very large focal length range, the 18-200mm is suitable as a standard lens for virtually all photographic occasions. Especially when travelling, the ultra-compact and lightweight design ensures undisturbed photo fun. From wide angle to telephoto range, you can master many photographic situations with this lens. The 18-200mm Di II is in the tradition of the legendary Tamron Megazoom lenses and has an 11.1x zoom that corresponds to a focal length range of 28-300mm on full-frame cameras. The AF18-200mm Di II works with innovative XR lenses (Extra Refractive Index) to optimize the distribution of optical power throughout the focal length range. This design reduces various imaging errors to the absolute minimum and at the same time allows a much more compact design. In addition, three aspherical hybrid elements to prevent spherical aberration and two elements made of LD (low dispersion) glass are used to compensate for chromatic aberration. The result is a versatile zoom lens with outstanding optical quality. It achieves an image scale of 1:3.7 and is therefore also suitable for macro shots, with a closest focusing distance of only 45cm. Experience the versatility of a new lens standard with fantastic value for money. The 18-200 mm is also available since March 2008 with a built-in motor for the Nikon D40, D40X and the D60 (item no. A14NII). The previous version has item no. A14N and is not suitable for the D40, D40X and the D60. Phherical and aspherical lens. Aspherical hybrid elements Thanks to innovative production techniques, we are now increasingly using aspherical lenses. These lenses, in general, have a surface that differs from the spherical shape. Especially the opening error and coma correction can be greatly improved with these aspheres. In addition, the distortion of lenses can be compensated by aspheres. During production, a special plastic is bonded to the glass surface and thus the asphere. Tamron masters this technology perfectly and uses these lenses on many of his lenses. Next to the standing image illustrates the difference between a spherical and an aspherical lens. The yellow marked part is a high quality plastic that connects to the spherical glass body. Image circle for Di II lenses Full-frame sensor Di II lenses are designed exclusively for digital SLR cameras with image sensors up to a size of 24x16mm. The optical systems of these lenses have been optimally matched to the performance characteristics of digital SLR cameras. The lenses are characterised by: - High resolution - Minimises light drop towards the edge. - Optimization of stray light behaviour. - Minimize chromatic aberration. For example, a highly efficient multiple coating was applied to the lens surfaces as well as in some cases a so-called internal coating, in which glued glass elements are coated. This ensures an effective reduction of stray light, especially occurring with digital image sensors. At the same time, the edge light drop has been minimised, so that digital images are evenly illuminated from the centre of the image to the corners. The Di II lenses are now offered in all focal length ranges preferred by users of digital SLR cameras. Please note that Di II generation lenses are only suitable for digital cameras with a sensor size of no more than 16 x 24 mm and can be used with full-frame sensors or small image SLR cameras, otherwise there will be vignetting at the edges. Legal Disclaimer Used goods. For this article, the difference taxation applies (§ 25 a para. 2 UStG), so that the applicable VAT cannot be shown separately.; Product Description AF18-200 mm - Technical features Tamron AF 18-200 mm F/3.5-6.3 XR Di II LD Aspherical [IF] Macro. 3-4x focal length range and 11.1x zoom Tamrons AF 18-200 mm - the digital revoluzoom Thanks to its very large focal length range, the 18-200mm is suitable as a standard lens for virtually all photographic occasions. Especially when travelling, the ultra-compact and lightweight design ensures undisturbed photo fun. From wide angle to telephoto range, you can master many photographic situations with this lens. The 18-200mm Di II is in the tradition of the legendary Tamron Megazoom lenses and has an 11.1x zoom that corresponds to a focal length range of 28-300mm on full-frame cameras. The AF18-200mm Di II works with innovative XR lenses (Extra Refractive Index) to optimize the distribution of optical power throughout the focal length range. This design reduces various imaging errors to the absolute minimum and at the same time allows a much more compact design. In addition, three aspherical hybrid elements to prevent spherical aberration and two elements made of LD (low dispersion) glass are used to compensate for chromatic aberration. The result is a versatile zoom lens with outstanding optical quality. It achieves an image scale of 1:3.7 and is therefore also suitable for macro shots, with a closest focusing distance of only 45cm. Experience the versatility of a new lens standard with fantastic value for money. The 18-200 mm is also available since March 2008 with a built-in motor for the Nikon D40, D40X and the D60 (item no. A14NII). The previous version has item no. A14N and is not suitable for the D40, D40X and the D60. Phherical and aspherical lens. Aspherical hybrid elements Thanks to innovative production techniques, we are now increasingly using aspherical lenses. These lenses, in general, have a surface that differs from the spherical shape. Especially the opening error and coma correction can be greatly improved with these aspheres. In addition, the distortion of lenses can be compensated by aspheres. During production, a special plastic is bonded to the glass surface and thus the asphere. Tamron masters this technology perfectly and uses these lenses on many of his lenses. Next to the standing image illustrates the difference between a spherical and an aspherical lens. The yellow marked part is a high quality plastic that connects to the spherical glass body. Image circle for Di II lenses Full-frame sensor Di II lenses are designed exclusively for digital SLR cameras with image sensors up to a size of 24x16mm. The optical systems of these lenses have been optimally matched to the performance characteristics of digital SLR cameras. The lenses are characterised by: - High resolution - Minimises light drop towards the edge. - Optimization of stray light behaviour. - Minimize chromatic aberration. For example, a highly efficient multiple coating was applied to the lens surfaces as well as in some cases a so-called internal coating, in which glued glass elements are coated. This ensures an effective reduction of stray light, especially occurring with digital image sensors. At the same time, the edge light drop has been minimised, so that digital images are evenly illuminated from the centre of the image to the corners. The Di II lenses are now offered in all focal length ranges preferred by users of digital SLR cameras. Please note that Di II generation lenses are only suitable for digital cameras with a sensor size of no more than 16 x 24 mm and can be used with full-frame sensors or small image SLR cameras, otherwise there will be vignetting at the edges. Legal Disclaimer Used goods. For this article, the difference taxation applies (§ 25 a para. 2 UStG), so that the applicable VAT cannot be shown separately.
|
![Tamron AF 18-200mm F/3.5-6.3 XR Di II LD Aspherical [IF] Macro Lens for Pentax](https://anete.shop/image/cache/catalog/ext4oc/89/18915346_-8792469-600x600.jpg)
