Made of aluminium alloy, solid and durable. Range scale 60mm, humanized design, provides a reference operation and is more accurate. Plastic mounting cover, the adjustable range of the holder chuck is 38-42mm. If the drill is loose, you can cover the plastic cover to fix it. Aluminium alloy material, design expansion groove on the bottom, which can be mounted in a vice ad shape. The utility model can be used for an electric drill holder. › See more product details; Product description Specification: Material: aluminium alloy. Max. Chuck diameter: 42 mm. Max. Drilling depth: 60 mm. Column height: 400 mm. Drill hole diameter:38-42mm Shank Diameter: 25mm Drilling depth: max. 60 mm. Application: holding an electric drill Quantity: 1 piece. Safe operations. 1) Before use, check that all parts of the drill are normal. 2) The drill and workpiece must be clamped and tightened, and the workpiece must not be held by hand to avoid injury accidents and equipment damage caused by the rotation of the drill. 3) Focus on the operation. Before working, the rocker arm and sledge must be locked. When loading and unloading the drill, do not hit it with a hand hammer or other tools or objects and also do not use the spindle to hit the drill up and down. Use a special key and a wrench to load and unload the drill clamp. The head must not hold a drill with a tapered shank. 4) When drilling thin plates, a wooden base is required. Apply light pressure when the drill penetrates the workpiece to avoid breaking the drill, damage to the equipment or accidents. 5) Do not wear gloves when the drill is running, and it is forbidden to use cotton gauze and towels for wiping the drill and for removing iron chips. After work, the drill must be wiped clean, the power supply interrupted and the parts stacking and working area clean and tidy. Box contents: 1 x Drill Holder(The drill is not included) Please note: 1. Please allow a small error due to manual measurement. Please make sure you do not mind before; Product description Specification: Material: aluminium alloy. Max. Chuck diameter: 42 mm. Max. Drilling depth: 60 mm. Column height: 400 mm. Drill hole diameter:38-42mm Shank Diameter: 25mm Drilling depth: max. 60 mm. Application: holding an electric drill Quantity: 1 piece. Safe operations. 1) Before use, check that all parts of the drill are normal. 2) The drill and workpiece must be clamped and tightened, and the workpiece must not be held by hand to avoid injury accidents and equipment damage caused by the rotation of the drill. 3) Focus on the operation. Before working, the rocker arm and sledge must be locked. When loading and unloading the drill, do not hit it with a hand hammer or other tools or objects and also do not use the spindle to hit the drill up and down. Use a special key and a wrench to load and unload the drill clamp. The head must not hold a drill with a tapered shank. 4) When drilling thin plates, a wooden base is required. Apply light pressure when the drill penetrates the workpiece to avoid breaking the drill, damage to the equipment or accidents. 5) Do not wear gloves when the drill is running, and it is forbidden to use cotton gauze and towels for wiping the drill and for removing iron chips. After work, the drill must be wiped clean, the power supply interrupted and the parts stacking and working area clean and tidy. Box contents: 1 x Drill Holder(The drill is not included) Please note: 1. Please allow a small error due to manual measurement. Please make sure you do not mind before; Specification: Material: aluminium alloy. Max. Chuck diameter: 42 mm. Max. Drilling depth: 60 mm. Column height: 400 mm. Drill hole diameter:38-42mm Shank Diameter: 25mm Drilling depth: max. 60 mm. Application: holding an electric drill Quantity: 1 piece. Safe operations. 1) Before use, check that all parts of the drill are normal. 2) The drill and workpiece must be clamped and tightened, and the workpiece must not be held by hand to avoid injury accidents and equipment damage caused by the rotation of the drill. 3) Focus on the operation. Before working, the rocker arm and sledge must be locked. When loading and unloading the drill, do not hit it with a hand hammer or other tools or objects and also do not use the spindle to hit the drill up and down. Use a special key and a wrench to load and unload the drill clamp. The head must not hold a drill with a tapered shank. 4) When drilling thin plates, a wooden base is required. Apply light pressure when the drill penetrates the workpiece to avoid breaking the drill, damage to the equipment or accidents. 5) Do not wear gloves when the drill is running, and it is forbidden to use cotton gauze and towels for wiping the drill and for removing iron chips. After work, the drill must be wiped clean, the power supply interrupted and the parts stacking and working area clean and tidy. Box contents: 1 x Drill Holder(The drill is not included) Please note: 1. Please allow a small error due to manual measurement. Please make sure you do not mind before
|
![PB Swiss Tools BitBlock with 10 Hexagon Socket Bits [5 x 50 mm, 5 x 95 mm] PB E6.714 | 100% Swiss Made | Handy Bit Set for Standard Applications in Industry and Crafts](https://anete.shop/image/cache/catalog/ext4oc/70/17574854_-7679610-238x238.jpg)
![Pack of 10 Dimmable G9 Halogen Bulbs, 40 W 230 V 2800 K G9 Halogen Bulbs for Oven Lamp, Ceiling Lights, Candlesticks [Energy Class F]](https://anete.shop/image/cache/catalog/ext4oc/90/19083374_-9007480-238x238.jpg)
