【Skin Care Assistant】This standing facial steamer with rotating arm accelerates skin microcirculation and has a moisturizing function. With it, you can perform a complete, high-quality skincare routine at home, which is cost-effective and convenient. Hot spray mode: the device has a hot spray mode and is a home spa for year-round use. The hot spray speeds up metabolism and cleans pores even deeper. 【High Quality Material】:This standing face steamer with rotating arm is mainly made of high quality plastic and electronic hardware, so it is not only safe but also durable. Under normal operation, it can meet your long-term skin care needs. 【DEEP HYDRATION】:This standing face steamer with rotating arm is larger than traditional standing face steamer nozzles and turns water molecules into nanoparticles through high frequency vibration, making hydration more effective. 【MAXIMIZE COMFORT】:Both the body and the spray tube can be rotated 360 degrees. In addition, the height of the telescopic tube can be adjusted between 22.83 and 26.77 inches, so you can stand, sit and lie down as you like with this device. › See more product details; Product description Product description Description Nowadays, night stays and overtime, long stays in air-conditioned rooms, sweaty sports, etc. accelerate the loss of moisture of the skin. Then you need this standing face steamer to improve your skin. It accelerates the micro-circulation of your skin, moisturises. Deep cleansing, moisturising and nourishing skin care allow you to complete a high-quality skincare routine at home. Don't hesitate, because your skin can't wait! Details Independent transparent water tank: independent transparent water tank design allows you to add water when you can better control capacity. UNIVERSAL WHEELS Each of the four stands is equipped with a universal wheel with brakes, so you can move it from bedroom to living room and fix it at will, which is very convenient. LCD control panel: LCD control panel is clear when switched on and off as well as does timing, making your use very intuitive and convenient. Application: It can be used at home so you can achieve a skin care spa at home, and it can also be used in beauty stores to provide better quality skin care services for customers. Specification Material: plastic + hardware electronics. Model: DT-118. Colour: white. Product advantages: moisturising, clean. Plug: EU standard. Height adjustment range: 58-68 cm/22.83-26.77 inches. Timing time: 0-20 minutes. Rated power: 750 W. Nominal voltage: 220 V, 50 Hz. Water tank capacity: 600 ml/20.29 oz. Package size: 69*28*21.5cm/27.17*11.02*8.46in Water tank size: 26 x 11 cm/10.2 x 4.3 inches. Cup size: 9.5*11cm/3.7*4.3in Nozzle jet length: 28 cm/11 inches. Length of nozzle: 16.5 cm/6.5 inches. Gross weight: 4.2 kg/9.26 lbs. Net weight: 4 kg / 8.82 lbs. Installation 1. Put the grooves of the two metal brackets together. 2. Assemble the thicker metal rod and plastic fittings together. A little force is required to compress them so that the metal rod and plastic fittings fit together completely. 3. Attach the plastic fittings to the cross stand. 4. Install the wheels after fixing the screws. 5. Attach the smaller metal rod to the top of the thicker metal rod. 6. Mount the corresponding holes on the bottom of the main body of the facial steamer on the top of the metal rod to complete the assembly. Use: 1. Slowly fill tap water. The tap water should not exceed the upper water level line, and then cover the water injection opening. 2. Connect the device to the power supply and then press the hot water jet switch. 3. Adjust the position and wait a while to fog. Package Included 1 x standing facial steamer. 1 x English manual. Safety Warning /; Product description Product description Description Nowadays, night stays and overtime, long stays in air-conditioned rooms, sweaty sports, etc. accelerate the loss of moisture of the skin. Then you need this standing face steamer to improve your skin. It accelerates the micro-circulation of your skin, moisturises. Deep cleansing, moisturising and nourishing skin care allow you to complete a high-quality skincare routine at home. Don't hesitate, because your skin can't wait! Details Independent transparent water tank: independent transparent water tank design allows you to add water when you can better control capacity. UNIVERSAL WHEELS Each of the four stands is equipped with a universal wheel with brakes, so you can move it from bedroom to living room and fix it at will, which is very convenient. LCD control panel: LCD control panel is clear when switched on and off as well as does timing, making your use very intuitive and convenient. Application: It can be used at home so you can achieve a skin care spa at home, and it can also be used in beauty stores to provide better quality skin care services for customers. Specification Material: plastic + hardware electronics. Model: DT-118. Colour: white. Product advantages: moisturising, clean. Plug: EU standard. Height adjustment range: 58-68 cm/22.83-26.77 inches. Timing time: 0-20 minutes. Rated power: 750 W. Nominal voltage: 220 V, 50 Hz. Water tank capacity: 600 ml/20.29 oz. Package size: 69*28*21.5cm/27.17*11.02*8.46in Water tank size: 26 x 11 cm/10.2 x 4.3 inches. Cup size: 9.5*11cm/3.7*4.3in Nozzle jet length: 28 cm/11 inches. Length of nozzle: 16.5 cm/6.5 inches. Gross weight: 4.2 kg/9.26 lbs. Net weight: 4 kg / 8.82 lbs. Installation 1. Put the grooves of the two metal brackets together. 2. Assemble the thicker metal rod and plastic fittings together. A little force is required to compress them so that the metal rod and plastic fittings fit together completely. 3. Attach the plastic fittings to the cross stand. 4. Install the wheels after fixing the screws. 5. Attach the smaller metal rod to the top of the thicker metal rod. 6. Mount the corresponding holes on the bottom of the main body of the facial steamer on the top of the metal rod to complete the assembly. Use: 1. Slowly fill tap water. The tap water should not exceed the upper water level line, and then cover the water injection opening. 2. Connect the device to the power supply and then press the hot water jet switch. 3. Adjust the position and wait a while to fog. Package Included 1 x standing facial steamer. 1 x English manual. Safety Warning /; Product description Description Nowadays, night stays and overtime, long stays in air-conditioned rooms, sweaty sports, etc. accelerate the loss of moisture of the skin. Then you need this standing face steamer to improve your skin. It accelerates the micro-circulation of your skin, moisturises. Deep cleansing, moisturising and nourishing skin care allow you to complete a high-quality skincare routine at home. Don't hesitate, because your skin can't wait! Details Independent transparent water tank: independent transparent water tank design allows you to add water when you can better control capacity. UNIVERSAL WHEELS Each of the four stands is equipped with a universal wheel with brakes, so you can move it from bedroom to living room and fix it at will, which is very convenient. LCD control panel: LCD control panel is clear when switched on and off as well as does timing, making your use very intuitive and convenient. Application: It can be used at home so you can achieve a skin care spa at home, and it can also be used in beauty stores to provide better quality skin care services for customers. Specification Material: plastic + hardware electronics. Model: DT-118. Colour: white. Product advantages: moisturising, clean. Plug: EU standard. Height adjustment range: 58-68 cm/22.83-26.77 inches. Timing time: 0-20 minutes. Rated power: 750 W. Nominal voltage: 220 V, 50 Hz. Water tank capacity: 600 ml/20.29 oz. Package size: 69*28*21.5cm/27.17*11.02*8.46in Water tank size: 26 x 11 cm/10.2 x 4.3 inches. Cup size: 9.5*11cm/3.7*4.3in Nozzle jet length: 28 cm/11 inches. Length of nozzle: 16.5 cm/6.5 inches. Gross weight: 4.2 kg/9.26 lbs. Net weight: 4 kg / 8.82 lbs. Installation 1. Put the grooves of the two metal brackets together. 2. Assemble the thicker metal rod and plastic fittings together. A little force is required to compress them so that the metal rod and plastic fittings fit together completely. 3. Attach the plastic fittings to the cross stand. 4. Install the wheels after fixing the screws. 5. Attach the smaller metal rod to the top of the thicker metal rod. 6. Mount the corresponding holes on the bottom of the main body of the facial steamer on the top of the metal rod to complete the assembly. Use: 1. Slowly fill tap water. The tap water should not exceed the upper water level line, and then cover the water injection opening. 2. Connect the device to the power supply and then press the hot water jet switch. 3. Adjust the position and wait a while to fog. Package Included 1 x standing facial steamer. 1 x English manual. Safety Warning /
|
![Pack of 10 Dimmable G9 Halogen Bulbs, 40 W 230 V 2800 K G9 Halogen Bulbs for Oven Lamp, Ceiling Lights, Candlesticks [Energy Class F]](https://anete.shop/image/cache/catalog/ext4oc/90/19083374_-9007480-238x238.jpg)
