ASHATA IRS2092S Digital Audio Stereo Amplifier Mono Channel Digital Amplifier Class D HiFi Power Board 500 W Digital Audio Amplifier Stereo Board Module

Short circuit protection for output. Output DC bias protection speaker protection. Over temperature protection: The output is switched off when the temperature of the heatsink FET is higher than 100 ° C. This is a pure power amplifier board whose sensitivity of the input signal of 1.5V is effective if your input signal voltage cannot reach this value, you recommend adding a preamp. Mono channel, for 2.0 channel must be bid twice.; Product description Features: 1. Short circuit protection Output DC bias protection speaker protection. 3. Over temperature protection: the output is switched off when the temperature of the heat sink FET is higher than 100 °C. 4.This is a pure power amplifier board whose sensitivity of the input signal of 1.5V is effective if your input signal voltage cannot reach this value, recommend adding a preamplifier. 5. Mono channel, for 2.0 channel must offer twice. Specifications: Power supply: double DC power supply ± 58 ± 70V. The rated output power: 500 W (± 65 V power supply, 4 Ohm load, distortion 10%) Efficiency: > = 90% SNR: 90 dB The total harmonic distortion: 380W (± 65 power 4 ohm speaker, distortion <0.1%) 280 W (± 65 power 8 Ohm speaker, distortion <0.1 %) Frequency range: 20Hz - 20KHz. Speaker: 4-8 Ohm Voltage magnification: 36 times. Input Sensitivity 1.5V (RMS) Output short circuit protection: yes. This output DC bias protection speaker protection: yes. Over temperature protection: Yes, radiator FET temperature higher than 100 °C, turn off output! Use precautions: 1. Nominal supply voltage is ± 65V, ± 58 --- ± 70V range, not over 70V! Positive and negative do not choose incorrectly. 2. Recommended power supply ± 65 V. 3. Recommended 4-8Ω/10-18-inch speaker 4. Check before the current, make sure the wiring is correct. Package contents: 1 x Digital Amplifier; Product description Features: 1. Short circuit protection Output DC bias protection speaker protection. 3. Over temperature protection: the output is switched off when the temperature of the heat sink FET is higher than 100 °C. 4.This is a pure power amplifier board whose sensitivity of the input signal of 1.5V is effective if your input signal voltage cannot reach this value, recommend adding a preamplifier. 5. Mono channel, for 2.0 channel must offer twice. Specifications: Power supply: double DC power supply ± 58 ± 70V. The rated output power: 500 W (± 65 V power supply, 4 Ohm load, distortion 10%) Efficiency: > = 90% SNR: 90 dB The total harmonic distortion: 380W (± 65 power 4 ohm speaker, distortion <0.1%) 280 W (± 65 power 8 Ohm speaker, distortion <0.1 %) Frequency range: 20Hz - 20KHz. Speaker: 4-8 Ohm Voltage magnification: 36 times. Input Sensitivity 1.5V (RMS) Output short circuit protection: yes. This output DC bias protection speaker protection: yes. Over temperature protection: Yes, radiator FET temperature higher than 100 °C, turn off output! Use precautions: 1. Nominal supply voltage is ± 65V, ± 58 --- ± 70V range, not over 70V! Positive and negative do not choose incorrectly. 2. Recommended power supply ± 65 V. 3. Recommended 4-8Ω/10-18-inch speaker 4. Check before the current, make sure the wiring is correct. Package contents: 1 x Digital Amplifier; Features: 1. Short circuit protection Output DC bias protection speaker protection. 3. Over temperature protection: the output is switched off when the temperature of the heat sink FET is higher than 100 °C. 4.This is a pure power amplifier board whose sensitivity of the input signal of 1.5V is effective if your input signal voltage cannot reach this value, recommend adding a preamplifier. 5. Mono channel, for 2.0 channel must offer twice. Specifications: Power supply: double DC power supply ± 58 ± 70V. The rated output power: 500 W (± 65 V power supply, 4 Ohm load, distortion 10%) Efficiency: > = 90% SNR: 90 dB The total harmonic distortion: 380W (± 65 power 4 ohm speaker, distortion <0.1%) 280 W (± 65 power 8 Ohm speaker, distortion <0.1 %) Frequency range: 20Hz - 20KHz. Speaker: 4-8 Ohm Voltage magnification: 36 times. Input Sensitivity 1.5V (RMS) Output short circuit protection: yes. This output DC bias protection speaker protection: yes. Over temperature protection: Yes, radiator FET temperature higher than 100 °C, turn off output! Use precautions: 1. Nominal supply voltage is ± 65V, ± 58 --- ± 70V range, not over 70V! Positive and negative do not choose incorrectly. 2. Recommended power supply ± 65 V. 3. Recommended 4-8Ω/10-18-inch speaker 4. Check before the current, make sure the wiring is correct. Package contents: 1 x Digital Amplifier

Product images are for illustrative purposes only, so the information they contain may differ from the product itself. Colors, notes, parameters, sizes, dimensions, functions, and/or any other characteristics of original products may differ from their actual appearance, so please refer to the product description in the product specifications. If you have any questions, please clarify by writing in an e-mail or by filling in the comments window when placing an order.

In the event that the order is made for a product regulated by law, Anete.lv, after evaluating the legal aspect of the order, has the right to refuse the order.