BIQU H2 V2S Revo Dual Gear Feeder Extruder Direct Drive Metal Extruder Upgrade Kit with 4 Mounting Holes Rapid Change Revo Nozzle & E3D RapidChange Revo™ Brass 1.75 mm 0.4 mm Nozzle

Product 1: Quick disassembly and easy replacement: after the nozzle is cooled, just unscrew the old nozzle by hand and screw the new nozzle in its place, so that the user can resume printing work in a short time; Moreover, different from the market. For other extruders, Revo nozzles are a factory sealed nozzle and heatbreak in one, so they're easy to fit and can't leak material when in use; adding a switch wrench is more convenient. and labor-saving, and Can be operated with one hand. Product 1: Lightweight and wide compatibility: BQIU H2 V2S Revo combines the advantages of H2 and E3D Rapidchange Revo, 198 g lightweight design, smaller inertia, more accurate positioning, higher printing accuracy, than the ordinary 300 g extruder on the market. 34% lighter at launch. Widely compatible with BIQU B1, BIQU BX, Ender-3, Voron2.4, Voron V0, Vzbot 3D printer, etc. Product 1: Adjustable filament loading tension and dual gear feeding: simply rotate the tension screw to accommodate different filaments, improve the printing success rate, improve the printing performance of flexible filaments, compatible with most filaments on the market, such as: ABS/PLA/PVA/HIPS/PET/PET etc. 7:1 gear ratio; 7.5 kg maximum extrusion force, H2 V2S Revo features a du. al-gear system to provide an exceptional pushing force, ensuring smooth feeding and giving snappy retractions. Product 1: Revo HeaterCore & High Temperature Print: Heat up much faster than a typical heaterblock. It's designed to be much safer, too - a positive temperature coefficient (PTC) means power reduces as it gets hotter, reducing hazards in the event of a thermal runaway. Supportable 300 °C high temperature printing filament Product 2: Swap your 3D printer's nozzles in less than 60 seconds without tools or hot tightening, just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo nozzle. Just screw one in to any Revo cold side and you're ready to 3D print. Product 2: Experiment freely: With nozzle swapping this easy, you're free to experiment with nozzle sizes you might not have used before. Set your 3D printer up for ultra-fine or ultra-thick extrusion widths in no time at all. Print large objects in less time, or tiny objects with high resolution. Product 2: Frustration-free: Each Revo nozzle is a preassembled nozzle and HeatBreak in one unit, so there's no hazardous hot tightening and no chance of incorrect assembly. Say goodbye to frustrating HotEnd leaks and enjoy reliable 3D printing! Product 2: Rapid identification: identify nozzle sizes at a glance thanks to a colour-coded silicone sock. Plus, each Revo nozzle has its size engraved into it with easy-to-read numbers, so there are no confusing identification markers to learn!; Product description BIQU H2 V2S Revo Dual Gear Feeder Extruder Direct Drive Metal Extruder Upgrade Kit with 4 Mounting Holes Rapid Change Revo Nozzle for BX Ender 3 Series, Voron2.4, Voron V0, Vzbot 3D Printer The innovative H2 V2S Revo is a compact dual-gear extrusion system that is incredibly light. The extruder with high-temperature resistance ensures outstanding performance and safer, smoother 3D printing thanks to specially considered features! E3D RapidChange Revo™ Brass 1.75 mm 0.4 mm Nozzle Experiment freely. Since replacing nozzles is so easy, you can experiment with nozzle sizes you may not have used before. Set up your 3D printer in no time at all for ultra-fine or ultra-thick extrusion widths. Print large objects in less time or tiny objects with high resolution. Without frustration. Each Revo nozzle consists of a pre-assembled nozzle and a heatbreak in one unit, so there is no dangerous hot tightening or the risk of incorrect assembly. Say goodbye to frustrating leaks at the hot end and enjoy reliable 3D printing! Quick identification. Thanks to the colour-coded silicone sock, you can see the nozzle sizes at a glance. In addition, each Revo nozzle has the size engraved with easy-to-read numbers, so you don't have to deal with confusing markings! A growing range. We are ready to make RapidChange nozzles of any size. First, we introduce brass nozzles in sizes 0.25mm, 0.4mm, 0.6mm and 0.8mm, and many more compatible nozzles will follow later. Wear-resistant and high-flow variants are already on our roadmap and will follow over time. Please note: Revo nozzles are not compatible with V6 heating blocks. You may need to adjust the Z offset when changing nozzles.; Product description BIQU H2 V2S Revo Dual Gear Feeder Extruder Direct Drive Metal Extruder Upgrade Kit with 4 Mounting Holes Rapid Change Revo Nozzle for BX Ender 3 Series, Voron2.4, Voron V0, Vzbot 3D Printer The innovative H2 V2S Revo is a compact dual-gear extrusion system that is incredibly light. The extruder with high-temperature resistance ensures outstanding performance and safer, smoother 3D printing thanks to specially considered features! E3D RapidChange Revo™ Brass 1.75 mm 0.4 mm Nozzle Experiment freely. Since replacing nozzles is so easy, you can experiment with nozzle sizes you may not have used before. Set up your 3D printer in no time at all for ultra-fine or ultra-thick extrusion widths. Print large objects in less time or tiny objects with high resolution. Without frustration. Each Revo nozzle consists of a pre-assembled nozzle and a heatbreak in one unit, so there is no dangerous hot tightening or the risk of incorrect assembly. Say goodbye to frustrating leaks at the hot end and enjoy reliable 3D printing! Quick identification. Thanks to the colour-coded silicone sock, you can see the nozzle sizes at a glance. In addition, each Revo nozzle has the size engraved with easy-to-read numbers, so you don't have to deal with confusing markings! A growing range. We are ready to make RapidChange nozzles of any size. First, we introduce brass nozzles in sizes 0.25mm, 0.4mm, 0.6mm and 0.8mm, and many more compatible nozzles will follow later. Wear-resistant and high-flow variants are already on our roadmap and will follow over time. Please note: Revo nozzles are not compatible with V6 heating blocks. You may need to adjust the Z offset when changing nozzles.; BIQU H2 V2S Revo Dual Gear Feeder Extruder Direct Drive Metal Extruder Upgrade Kit with 4 Mounting Holes Rapid Change Revo Nozzle for BX Ender 3 Series, Voron2.4, Voron V0, Vzbot 3D Printer The innovative H2 V2S Revo is a compact dual-gear extrusion system that is incredibly light. The extruder with high-temperature resistance ensures outstanding performance and safer, smoother 3D printing thanks to specially considered features! E3D RapidChange Revo™ Brass 1.75 mm 0.4 mm Nozzle Experiment freely. Since replacing nozzles is so easy, you can experiment with nozzle sizes you may not have used before. Set up your 3D printer in no time at all for ultra-fine or ultra-thick extrusion widths. Print large objects in less time or tiny objects with high resolution. Without frustration. Each Revo nozzle consists of a pre-assembled nozzle and a heatbreak in one unit, so there is no dangerous hot tightening or the risk of incorrect assembly. Say goodbye to frustrating leaks at the hot end and enjoy reliable 3D printing! Quick identification. Thanks to the colour-coded silicone sock, you can see the nozzle sizes at a glance. In addition, each Revo nozzle has the size engraved with easy-to-read numbers, so you don't have to deal with confusing markings! A growing range. We are ready to make RapidChange nozzles of any size. First, we introduce brass nozzles in sizes 0.25mm, 0.4mm, 0.6mm and 0.8mm, and many more compatible nozzles will follow later. Wear-resistant and high-flow variants are already on our roadmap and will follow over time. Please note: Revo nozzles are not compatible with V6 heating blocks. You may need to adjust the Z offset when changing nozzles.