CHM GmbH® Centrifugal Pump 1.1 kW Stainless Steel 5400 L/h, 6.5 Bar Garden Pump with Pressure Switch Adjustable and Dry Run Protection

Availability: Delivery time 3-10 working days Availability 10
ID: 6535477
Product Code: ANEB0D2RNP25ST

333.96€
(Ex Tax: 276.00€)


Description

Delivery head: 65 m / max. Pressure: 6.5 bar / Max. Flow rate: 5400 L/h - 90 L/min. Max. Suction height: 8 m at 1 inch Robust and rust-proof stainless steel shaft. Multi-stage centrifugal pump, 6 x stainless steel paddle wheels covered with plastic for good smoothness. Max. Water temperature: 60 °C / connection suction and pressure side: 1 inch internal thread Starting pressure: 0.5-6.7 bar. Continuous pressure: 0.8-7.0 bar min. Differential pressure 0.3 bar max. Differential pressure 6.5 bar. Maximum operating pressure: 8 bar This pump is only suitable if there is a check valve or foot valve at the bottom of the suction line (e.g. in a well/cistern). The check valve must not be installed in front of the pump or above the suction line. ! Technical data pressure switch: for pumps max. up to 2.2 kW and max. 8 bar, integrated brass check valve on the pressure side prevents the consumer line from running out. Box contents: centrifugal pump 1.1 kW and pump control adjustable in original box with BA in German/English › See more product details; Product description CHM GmbH Centrifugal pump stainless steel 1100 watt with pressure switch latest generation. Attention: This pump is only suitable if a check valve or foot valve is present at the bottom (e.g. for a well/cistern). We do not recommend the check valve directly in front of the pump and advise against purchase. Description: Pump starts and stops automatically, depending on the desired setting. Very smooth running 68 db, high pressure build up with large flow rate as well as an integrated hot running protection in the motor winding characterise this pump. Thermal protection: integrated overheating protection in the motor winding. Technical data: 60 °C connection suction and pressure side: 1 inch internal thread. The pump has 2 mounts at the bottom, suitable for mounting on a pressure boiler. Cable length: 30 cm with plug L W H: 55 x 15 x 18 cm. Noise level: 68 dB. ! Garden irrigation > > max. 4 sprinklers can be connected. Please note that we do not recommend PE pipes as suction lines. The cable or consumer on the pressure side should have at least 1 inch. Otherwise, you also need a pressure expansion tank. ! Important! The pump should be placed near the fountain hole to ensure the max. suction height. Equip the intake line with a check valve to ensure that the water column is maintained. If the check valve is installed in front of the pump and not as a foot valve, then you must also form a water column under the check valve. The water column must be resistant, as the pump cannot suck air which is in a suction line. The suction line should have a diameter of 1 and not be smaller or larger. Otherwise, the pump cannot provide the appropriate power or pressure. If you are not sure of these requirements on site, please use our Jet pump; Product description CHM GmbH Centrifugal pump stainless steel 1100 watt with pressure switch latest generation. Attention: This pump is only suitable if a check valve or foot valve is present at the bottom (e.g. for a well/cistern). We do not recommend the check valve directly in front of the pump and advise against purchase. Description: Pump starts and stops automatically, depending on the desired setting. Very smooth running 68 db, high pressure build up with large flow rate as well as an integrated hot running protection in the motor winding characterise this pump. Thermal protection: integrated overheating protection in the motor winding. Technical data: 60 °C connection suction and pressure side: 1 inch internal thread. The pump has 2 mounts at the bottom, suitable for mounting on a pressure boiler. Cable length: 30 cm with plug L W H: 55 x 15 x 18 cm. Noise level: 68 dB. ! Garden irrigation > > max. 4 sprinklers can be connected. Please note that we do not recommend PE pipes as suction lines. The cable or consumer on the pressure side should have at least 1 inch. Otherwise, you also need a pressure expansion tank. ! Important! The pump should be placed near the fountain hole to ensure the max. suction height. Equip the intake line with a check valve to ensure that the water column is maintained. If the check valve is installed in front of the pump and not as a foot valve, then you must also form a water column under the check valve. The water column must be resistant, as the pump cannot suck air which is in a suction line. The suction line should have a diameter of 1 and not be smaller or larger. Otherwise, the pump cannot provide the appropriate power or pressure. If you are not sure of these requirements on site, please use our Jet pump; CHM GmbH Centrifugal pump stainless steel 1100 watt with pressure switch latest generation. Attention: This pump is only suitable if a check valve or foot valve is present at the bottom (e.g. for a well/cistern). We do not recommend the check valve directly in front of the pump and advise against purchase. Description: Pump starts and stops automatically, depending on the desired setting. Very smooth running 68 db, high pressure build up with large flow rate as well as an integrated hot running protection in the motor winding characterise this pump. Thermal protection: integrated overheating protection in the motor winding. Technical data: 60 °C connection suction and pressure side: 1 inch internal thread. The pump has 2 mounts at the bottom, suitable for mounting on a pressure boiler. Cable length: 30 cm with plug L W H: 55 x 15 x 18 cm. Noise level: 68 dB. ! Garden irrigation > > max. 4 sprinklers can be connected. Please note that we do not recommend PE pipes as suction lines. The cable or consumer on the pressure side should have at least 1 inch. Otherwise, you also need a pressure expansion tank. ! Important! The pump should be placed near the fountain hole to ensure the max. suction height. Equip the intake line with a check valve to ensure that the water column is maintained. If the check valve is installed in front of the pump and not as a foot valve, then you must also form a water column under the check valve. The water column must be resistant, as the pump cannot suck air which is in a suction line. The suction line should have a diameter of 1 and not be smaller or larger. Otherwise, the pump cannot provide the appropriate power or pressure. If you are not sure of these requirements on site, please use our Jet pump

Product images are illustrative

Product images are for illustrative purposes only, so the information they contain may differ from the product itself. Colors, notes, parameters, sizes, dimensions, functions, and/or any other characteristics of original products may differ from their actual appearance, so please refer to the product description in the product specifications. If you have any questions, please clarify by writing in an e-mail or by filling in the comments window when placing an order.

Product conformity check

In the event that the order is made for a product regulated by law, Anete.lv, after evaluating the legal aspect of the order, has the right to refuse the order.

Image Product Name Unit Price Product Code Availability Quantity
Hydraulic Gear Pump Hochdruck-Zahnradpumpe GPY-3 GPY-7 GPY-9 GPY-11.5 Hydraulikpumpe(GPY-7) Hydraulic Gear Pump Hochdruck-Zahnradpumpe GPY-3 GPY-7 GPY-9 GPY-11.5 Hydraulikpumpe(GPY-7) 461.68€ ANEB0DQB7K6VJT
Delivery time 3-10 working days
Availability 10
JOLAU Mechanical Seals 2100K-48 2100-2-48(L3) Typ 2100K Typ 2100 Wellengröße 48 mm Elastomerbalg-Gleitringdichtungen for Pumpen (Color : CAR-SIC-VIT) JOLAU Mechanical Seals 2100K-48 2100-2-48(L3) Typ 2100K Typ 2100 Wellengröße 48 mm Elastomerbalg-Gleitringdichtungen for Pumpen (Color : CAR-SIC-VIT) 148.23€ ANE55B0BMPVJ94YT
Delivery time 3-10 working days
Availability 10
Hydraulic Gear Pump HGP-3A Hydraulische Zahnradpumpe Einzelne Hydraulikölpumpe Hochdruck-Druckerhöhungspumpe(HGP-3A-F19L) Hydraulic Gear Pump HGP-3A Hydraulische Zahnradpumpe Einzelne Hydraulikölpumpe Hochdruck-Druckerhöhungspumpe(HGP-3A-F19L) 494.17€ ANEB0DPKPXBZ9T
Delivery time 3-10 working days
Availability 10
Handok Hydraulic Ventilplatte Motor kompatibel mit Kawasaki M2X150 Handok Hydraulic Ventilplatte Motor kompatibel mit Kawasaki M2X150 297.66€ ANEB0D6NFPDZPT
Delivery time 3-10 working days
Availability 10
Buyers Products 1304515 hydraulic cylinder. Buyers Products 1304515 hydraulic cylinder. 585.11€ ANEB00IUK8I6UT
Delivery time 3-10 working days
Availability 10

Imagem

Good offers View more

Image Name Unit Price Product Code Availability Quantity
Spray gun for protective products with kit for body cavity applications (NHOU) Spray gun for protective products with kit for body cavity applications (NHOU)
280.00€ / pcs. 309.00€
AH093016
0-1 Working Days
Availability 14
/ pcs.
Traditional smokehouse Traditional smokehouse
220.00€ / pcs. 250.00€
ANW25DM
0-1 Working Days
Availability 26
/ pcs.
NH oil coating for anti-rust treatment - set 1000 ml x 3 NH oil coating for anti-rust treatment - set 1000 ml x 3
110.00€ / Package 116.00€
NHOUSETAm
0-1 Working Days
Availability 54
/ Package
NH oil coating for anti-rust treatment - set 400 ml x 6 NH oil coating for anti-rust treatment - set 400 ml x 6
100.00€ / Package 107.00€
NHOUTransparentAm
0-1 Working Days
Availability 5
/ Package

Customers choose View more

Image Name Unit Price Product Code Availability Quantity
70Mai Videoreģistrators a400 balts 70Mai Videoreģistrators a400 balts 74.63€ AS&MIV0A400WHIT
Delivery time 3-10 working days
Availability 1
Zeķes KILIMANJARO High M Navy Zeķes KILIMANJARO High M Navy 18.15€ 8424752003058
0-1 Working Days
Availability 5
Zeķes KILIMANJARO High XL Navy Zeķes KILIMANJARO High XL Navy 18.15€ 8424752003126
0-1 Working Days
Availability 3
Zeķes KILIMANJARO High L Navy Zeķes KILIMANJARO High L Navy 18.15€ 8424752003041
0-1 Working Days
Availability 5
Zeķes KILIMANJARO High S Navy Zeķes KILIMANJARO High S Navy 18.15€ 8424752003072
0-1 Working Days
Availability 2
Zeķes CARES XL Green Zeķes CARES XL Green 17.05€ 8424752004192
0-1 Working Days
Availability 6
Lizard Sandales LIZ Sandal SUPER HIKE Leather W 39 Black Lizard Sandales LIZ Sandal SUPER HIKE Leather W 39 Black 142.78€ 7615523762231
0-1 Working Days
Availability 5
Lizard Sandales LIZ Sandal SUPER TREK 40 Fir Green/Black Lizard Sandales LIZ Sandal SUPER TREK 40 Fir Green/Black 131.78€ 7615523486489
0-1 Working Days
Availability 5
Lizard Sandales LIZ Sandal SUPER HIKE Leather W 40 Black Lizard Sandales LIZ Sandal SUPER HIKE Leather W 40 Black 142.78€ 7615523762248
0-1 Working Days
Availability 5
Sistēma W Zone Harness S Octane Sistēma W Zone Harness S Octane 104.50€ 793661488668
0-1 Working Days
Availability 1
Laterna MOJI R+ LANTERN  Dark Laurel Laterna MOJI R+ LANTERN Dark Laurel 46.20€ 793661520221
0-1 Working Days
Availability 1
Lizard Sandales LIZ Sandal SUPER TREK 41 Fir Green/Black Lizard Sandales LIZ Sandal SUPER TREK 41 Fir Green/Black 131.78€ 7615523486496
0-1 Working Days
Availability 5