Plyisty Solar Radiation Light Quantum Meter, Photosynthetic Active Radiation Sensor DC 9-30 V 400-700 Nm for Aquaculture (YGC-GHFS-KV-A1)

Availability: 5
ID: 7667880
Product Code: ANEB0FD6GQ4DNT

325.42€
(Ex Tax: 268.94€)


Description
HIGH PERFORMANCE:Sturdy structure, good sealing, long service life, high measurement accuracy, good stability, long transmission distance and strong resistance to external interference. Aluminum Housing The outer aluminum housing is IP67 water resistant, rust-proof, heat resistant, not easy to age, long service life, suitable for long-term use in outdoor rain and snow environments. Wide applications: suitable for various occasions where the measurement of photosynthetic active radiation is required, e.g. environmental monitoring, aquaculture, greenhouses and laboratories. Function: The photosynthetic active radiation meter is a device for measuring the radiation energy in a certain band (wavelength 400nm-700nm) of the solar radiation spectrum, which can be absorbed by chlorophyll green plants, converted and used to synthesize organic matter. Photosynthetically active radiation sensor: Therefore, the radiation in the 400-700nm band is commonly referred to as photosynthetically active radiation (PAR), represented by the symbol Qp. Photosynthetically active radiation is the source of energy for the activities of plant life, the synthesis of organic matter and the formation of yields. › See more product details; Product description 1. Aluminum Shell The outer aluminum shell is ip67 waterproof, rust meat, heat resistant, not easy to age, long term and suitable for long-term use in outdoor rain and snow environments. 2. Function The photosynthetic active radiation meter is a device used to measure the radiation energy in a certain band (wavelength 400nm-700nm) of solar radiation spectrum, which can be absorbed, converted and used by chlorophyll of green plants to synthesize organic matter. 3. 400-700nm Spectrum Range The 5 types of photosynthetic reactions in plants, namely photosynthesis, pigment synthesis, photoperioodism, phototropism and photomorphogenesis, all occur in the wavelength range of 400-700nm. V. The photosynthetically active radiation is the energy source for activities for plant life, synthesis of organic matter and yield formation. 5. High performance: the stable structure, good sealing, service life, high measurement accuracy, good stability, long transmission distance and strong resistance to external interference. 6. Wide applications: suitable for various occasions that need to be measured mis-synthetic active radiation, such as environmental monitoring, aquaculture, greenhouses and laboratories. Technical data: Element type: photosynthetic active radiation sensor. Material: aluminium alloy. Weight: approx. 292.00 g / 10.3 oz. Size: approx. 65 x 31 mm / 2.56 x 1.22 inches. Mounting hole spacing: approx. 57 mm / 2.24 inches. Power supply: DC 9-30V Spectrum range: 400-700nm Range: 0-1500W/M2 (or 0-5000umol*M-2*S-1) Resolution: 1W/M2 (or Umol*M-2*S-1) Response time: ≤ 5 ms (95%). Non-linearity: ± 4%. Directional response (corrected to angle within 80 degrees): ± 10%. Temperature response (-20°C to 60°C): ± 5%. Annual stability: ± 3%. Spectrum response bandwidth: (400 ± 10) nm to (700 ± 10) nm Spectrum selectivity error: ± 5%. Out of the band reaction: ≤ 10%. Level: IP67. Operating temperature: -40 to 80 °C. Relative humidity: 0-100%RH Power consumption: ≤ 100mW at 5V Troubleshooting: output incorrect display value on instruments. This may be due to wiring or communication of connection failures, resulting in incorrect data acquisition. Please check if the wiring is correct and secure, whether the serial port is occupied and if the serial port settings are correct. The wire sequence is as follows: Cable hue output signal: red: positive power; green: negative force; white: signal How to use: 1. Use the screws to attach the sensor via the installation hole on the sensor on the mounting bracket. 2. Make sure the device is parallel to the (adjust the hand-pulled screws and check the stall bubble status to determine if it is parallel). Package list: 1 x photosynthetic active radiation sensor with cable. 1 x user manual (English language not guaranteed). Note: 1. Check the packaging for damage and check if the product model corresponds to the selected one. 2. Do not connect the wires when they are driven, and do not get in until after checking the connections. 3. The length of the sensor cable may affect the output signal of the product and do not change the product arbitrarily during use. 4. The sensor is a precise device, users should not disassemble, use pointed objects or erosive liquids to contact the sensor surface so as not to damage the product.; Product description 1. Aluminum Shell The outer aluminum shell is ip67 waterproof, rust meat, heat resistant, not easy to age, long term and suitable for long-term use in outdoor rain and snow environments. 2. Function The photosynthetic active radiation meter is a device used to measure the radiation energy in a certain band (wavelength 400nm-700nm) of solar radiation spectrum, which can be absorbed, converted and used by chlorophyll of green plants to synthesize organic matter. 3. 400-700nm Spectrum Range The 5 types of photosynthetic reactions in plants, namely photosynthesis, pigment synthesis, photoperioodism, phototropism and photomorphogenesis, all occur in the wavelength range of 400-700nm. V. The photosynthetically active radiation is the energy source for activities for plant life, synthesis of organic matter and yield formation. 5. High performance: the stable structure, good sealing, service life, high measurement accuracy, good stability, long transmission distance and strong resistance to external interference. 6. Wide applications: suitable for various occasions that need to be measured mis-synthetic active radiation, such as environmental monitoring, aquaculture, greenhouses and laboratories. Technical data: Element type: photosynthetic active radiation sensor. Material: aluminium alloy. Weight: approx. 292.00 g / 10.3 oz. Size: approx. 65 x 31 mm / 2.56 x 1.22 inches. Mounting hole spacing: approx. 57 mm / 2.24 inches. Power supply: DC 9-30V Spectrum range: 400-700nm Range: 0-1500W/M2 (or 0-5000umol*M-2*S-1) Resolution: 1W/M2 (or Umol*M-2*S-1) Response time: ≤ 5 ms (95%). Non-linearity: ± 4%. Directional response (corrected to angle within 80 degrees): ± 10%. Temperature response (-20°C to 60°C): ± 5%. Annual stability: ± 3%. Spectrum response bandwidth: (400 ± 10) nm to (700 ± 10) nm Spectrum selectivity error: ± 5%. Out of the band reaction: ≤ 10%. Level: IP67. Operating temperature: -40 to 80 °C. Relative humidity: 0-100%RH Power consumption: ≤ 100mW at 5V Troubleshooting: output incorrect display value on instruments. This may be due to wiring or communication of connection failures, resulting in incorrect data acquisition. Please check if the wiring is correct and secure, whether the serial port is occupied and if the serial port settings are correct. The wire sequence is as follows: Cable hue output signal: red: positive power; green: negative force; white: signal How to use: 1. Use the screws to attach the sensor via the installation hole on the sensor on the mounting bracket. 2. Make sure the device is parallel to the (adjust the hand-pulled screws and check the stall bubble status to determine if it is parallel). Package list: 1 x photosynthetic active radiation sensor with cable. 1 x user manual (English language not guaranteed). Note: 1. Check the packaging for damage and check if the product model corresponds to the selected one. 2. Do not connect the wires when they are driven, and do not get in until after checking the connections. 3. The length of the sensor cable may affect the output signal of the product and do not change the product arbitrarily during use. 4. The sensor is a precise device, users should not disassemble, use pointed objects or erosive liquids to contact the sensor surface so as not to damage the product.; 1. Aluminum Shell The outer aluminum shell is ip67 waterproof, rust meat, heat resistant, not easy to age, long term and suitable for long-term use in outdoor rain and snow environments. 2. Function The photosynthetic active radiation meter is a device used to measure the radiation energy in a certain band (wavelength 400nm-700nm) of solar radiation spectrum, which can be absorbed, converted and used by chlorophyll of green plants to synthesize organic matter. 3. 400-700nm Spectrum Range The 5 types of photosynthetic reactions in plants, namely photosynthesis, pigment synthesis, photoperioodism, phototropism and photomorphogenesis, all occur in the wavelength range of 400-700nm. V. The photosynthetically active radiation is the energy source for activities for plant life, synthesis of organic matter and yield formation. 5. High performance: the stable structure, good sealing, service life, high measurement accuracy, good stability, long transmission distance and strong resistance to external interference. 6. Wide applications: suitable for various occasions that need to be measured mis-synthetic active radiation, such as environmental monitoring, aquaculture, greenhouses and laboratories. Technical data: Element type: photosynthetic active radiation sensor. Material: aluminium alloy. Weight: approx. 292.00 g / 10.3 oz. Size: approx. 65 x 31 mm / 2.56 x 1.22 inches. Mounting hole spacing: approx. 57 mm / 2.24 inches. Power supply: DC 9-30V Spectrum range: 400-700nm Range: 0-1500W/M2 (or 0-5000umol*M-2*S-1) Resolution: 1W/M2 (or Umol*M-2*S-1) Response time: ≤ 5 ms (95%). Non-linearity: ± 4%. Directional response (corrected to angle within 80 degrees): ± 10%. Temperature response (-20°C to 60°C): ± 5%. Annual stability: ± 3%. Spectrum response bandwidth: (400 ± 10) nm to (700 ± 10) nm Spectrum selectivity error: ± 5%. Out of the band reaction: ≤ 10%. Level: IP67. Operating temperature: -40 to 80 °C. Relative humidity: 0-100%RH Power consumption: ≤ 100mW at 5V Troubleshooting: output incorrect display value on instruments. This may be due to wiring or communication of connection failures, resulting in incorrect data acquisition. Please check if the wiring is correct and secure, whether the serial port is occupied and if the serial port settings are correct. The wire sequence is as follows: Cable hue output signal: red: positive power; green: negative force; white: signal How to use: 1. Use the screws to attach the sensor via the installation hole on the sensor on the mounting bracket. 2. Make sure the device is parallel to the (adjust the hand-pulled screws and check the stall bubble status to determine if it is parallel). Package list: 1 x photosynthetic active radiation sensor with cable. 1 x user manual (English language not guaranteed). Note: 1. Check the packaging for damage and check if the product model corresponds to the selected one. 2. Do not connect the wires when they are driven, and do not get in until after checking the connections. 3. The length of the sensor cable may affect the output signal of the product and do not change the product arbitrarily during use. 4. The sensor is a precise device, users should not disassemble, use pointed objects or erosive liquids to contact the sensor surface so as not to damage the product.

Product images are illustrative

Product images are for illustrative purposes only, so the information they contain may differ from the product itself. Colors, notes, parameters, sizes, dimensions, functions, and/or any other characteristics of original products may differ from their actual appearance, so please refer to the product description in the product specifications. If you have any questions, please clarify by writing in an e-mail or by filling in the comments window when placing an order.

Product conformity check

In the event that the order is made for a product regulated by law, Anete.lv, after evaluating the legal aspect of the order, has the right to refuse the order.

Imagem

Good offers View more

Image Name Unit Price Product Code Availability Quantity
Spray gun for protective products with kit for body cavity applications (NHOU) Spray gun for protective products with kit for body cavity applications (NHOU) 309.00€ / pcs. AH093016
Availability: 14
/ pcs.
Traditional smokehouse Traditional smokehouse 250.00€ / pcs. ANW25DM
Availability: 26
/ pcs.
NH oil coating for anti-rust treatment - set 1000 ml x 3 NH oil coating for anti-rust treatment - set 1000 ml x 3 116.00€ / Package NHOUSETAm
Availability: 45
/ Package
NH oil coating for anti-rust treatment - set 400 ml x 6 NH oil coating for anti-rust treatment - set 400 ml x 6 107.00€ / Package NHOUTransparentAm
Availability: 22
/ Package

Customers choose View more