E3D RapidChange™ Revo Six (24V)

Compatible with: Prusa i3 MK2 / MK3 variants No machine redesign. Revo Six is a top choice if you want to update your old E3D V6 setup to the latest generation of E3D HotEnd technology. It has the same height, the same diameter, and the same groove mount as the E3D V6, so it drops straight into V6-fitted machines without the hassle of redesigning print head mounts and accessories. Just fit it, connect the Revo HeaterCore, and you're ready to 3D print. Ready for Revo. Revo Six is designed to work with Revo Nozzles, so you can perform nozzle swaps with your fingers at room temperature without complex tools or hot tightening. Each Revo Nozzle is factory sealed, making it much simpler to use and more reliable than most HotEnd technology available today. Enhanced performance. Revo Six uses a Revo HeaterCore, our latest HotEnd heating and sensing architecture. It reaches temperature much faster than a traditional aluminium HeaterBlock, and it's much safer: a positive temperature coefficient (PTC) means the HeaterCore can't melt at extreme temperatures, reducing hazards in the event of a thermal runaway. A new look. An anodised black heat sink distinguishes Revo Six from its predecessor, and every unit ships with a premium crystal-clear fan duct so your machine will stand out from the crowd.; Product description No reconstruction of the machine. Revo Six is the first choice if you want to upgrade your old E3D V6 setup to the latest generation of E3D HotEnd technology. It has the same height, diameter and groove holder as the E3D V6, so it fits directly into the machines equipped with the V6 without having to redesign printhead mounts and accessories. Simply install, connect the Revo HeaterCore and you're ready to print 3D. Ready for Revo. Revo Six is designed for use with Revo nozzles, so you can perform nozzle swapping at room temperature with your fingers without complicated tools or hot tightening. Each Revo nozzle is factory sealed, making it much easier to use and more reliable than most HotEnd technologies available today. Improved performance. Revo Six uses a Revo HeaterCore, our latest HotEnd heating and sensor technology. It reaches the temperature much faster than a conventional aluminium heating block and is much safer: a positive temperature coefficient (PTC) means that the HeaterCore cannot melt at extreme temperatures, reducing the hazards of thermal run-through. A new look. An anodised black body distinguishes the Revo Six from its predecessor, and each device comes with a high-quality crystal clear fan channel, so that your device will stand out from the crowd. Please note: if you change the nozzles, you may need to adjust your Z offset. Compatible with: Prusa i3 MK2 / MK3 variants (make sure you choose the right voltage for your setup); Product description No reconstruction of the machine. Revo Six is the first choice if you want to upgrade your old E3D V6 setup to the latest generation of E3D HotEnd technology. It has the same height, diameter and groove holder as the E3D V6, so it fits directly into the machines equipped with the V6 without having to redesign printhead mounts and accessories. Simply install, connect the Revo HeaterCore and you're ready to print 3D. Ready for Revo. Revo Six is designed for use with Revo nozzles, so you can perform nozzle swapping at room temperature with your fingers without complicated tools or hot tightening. Each Revo nozzle is factory sealed, making it much easier to use and more reliable than most HotEnd technologies available today. Improved performance. Revo Six uses a Revo HeaterCore, our latest HotEnd heating and sensor technology. It reaches the temperature much faster than a conventional aluminium heating block and is much safer: a positive temperature coefficient (PTC) means that the HeaterCore cannot melt at extreme temperatures, reducing the hazards of thermal run-through. A new look. An anodised black body distinguishes the Revo Six from its predecessor, and each device comes with a high-quality crystal clear fan channel, so that your device will stand out from the crowd. Please note: if you change the nozzles, you may need to adjust your Z offset. Compatible with: Prusa i3 MK2 / MK3 variants (make sure you choose the right voltage for your setup); No reconstruction of the machine. Revo Six is the first choice if you want to upgrade your old E3D V6 setup to the latest generation of E3D HotEnd technology. It has the same height, diameter and groove holder as the E3D V6, so it fits directly into the machines equipped with the V6 without having to redesign printhead mounts and accessories. Simply install, connect the Revo HeaterCore and you're ready to print 3D. Ready for Revo. Revo Six is designed for use with Revo nozzles, so you can perform nozzle swapping at room temperature with your fingers without complicated tools or hot tightening. Each Revo nozzle is factory sealed, making it much easier to use and more reliable than most HotEnd technologies available today. Improved performance. Revo Six uses a Revo HeaterCore, our latest HotEnd heating and sensor technology. It reaches the temperature much faster than a conventional aluminium heating block and is much safer: a positive temperature coefficient (PTC) means that the HeaterCore cannot melt at extreme temperatures, reducing the hazards of thermal run-through. A new look. An anodised black body distinguishes the Revo Six from its predecessor, and each device comes with a high-quality crystal clear fan channel, so that your device will stand out from the crowd. Please note: if you change the nozzles, you may need to adjust your Z offset. Compatible with: Prusa i3 MK2 / MK3 variants (make sure you choose the right voltage for your setup)

Product images are for illustrative purposes only, so the information they contain may differ from the product itself. Colors, notes, parameters, sizes, dimensions, functions, and/or any other characteristics of original products may differ from their actual appearance, so please refer to the product description in the product specifications. If you have any questions, please clarify by writing in an e-mail or by filling in the comments window when placing an order.

In the event that the order is made for a product regulated by law, Anete.lv, after evaluating the legal aspect of the order, has the right to refuse the order.