3D Printer Control Board MKS DLC32 V2.1 32Bit Control Board with WIFI 2.4 Inch TS24 R V2.1 Touch Screen Laser Engraving Machine Motherboard

32 Bit Processor This motherboard has high performance and is equipped with a 32-bit STTM32 processor, supported memory card storage, an expandable WIFI module, a power failure relay module, switches for material breakage detection and an external card slot. 2.4 inch TS24 R V2.1 Touch Screen This touch screen provides a clear display that simplifies the user's operation process, with a clear user interface that intuitively displays the desired functions for easy operation. The control board of the 3D printer combines stylish appearance and excellent performance. Super Wide Compatibility This motherboard allows for fast engraving and web control, mobile app control, etc. The MKS DLC32 has mounting holes and a board size compatible with the MKS DLC and can also be used with PC software for GRBLaser and LightBurn. High Accuracy This 3D printer touch screen can work closely with the machine control, ensuring high-precision printing operation and printing excellent and stable products. Built in 8M Byte Flash Memory Chip This 3D printer motherboard adopts built-in 8M byte flash memory chip to improve product quality and provide effective protection for more application scenarios.; Product description Specification: Item Type:3D Printer Motherboard Kit Material: PCB. Motherboard parameters: Model: for MKSDLC32. Voltage: 12-24V DC (MCU: ESP32 WROOM 32U (32 bit) MCU Frequency: 240MHz Flash memory: 8192K bytes Memory: 520K bytes Speed: <8000 mm/min Offline display: for MKS TS24 R, TS35 R. Firmware: for GRBL Serial port driver: USB Axles WiFi onboard: 4 (X, Y1, Y2, Z). Memory Card: Support MKS Laser Tool: Support Available machine: CNC laser engraving machine Stepper motor driver: A4988, DRV 8825, TMC2208, 2209, 2225 (for Nema17 engine) Additional driver: TB6600, TMC2160 (for Nema23 engine) Laser: less than 20W (>20W, external power) Compatible software: for LaserGrbl, for Xloader, for GrblController, for Benbox, for MDraw, for LightBurn Display parameters: Model: TS24 R V2.1. Outer size: approx. 80 x 50 mm / 3.15 x 1.97 inches. Colour touch screen: 2.4 inch touch screen. Microprocessor: 32-bit STTM32 processor Update method: SD file update Support memory system: memory card Supported file format: Gcode Expandable modules: WIFI module, power failure relay module, material breakage detection switch, external card slot. A4988 Driver Features & Benefits: Low RDS Output (On) Automatic detection or selection of power drop mode. Mixed with slow power drop mode Synchronous rectification for low power consumption Internal low voltage lock. Cross-current protection. 3.3 and 5 V compatible logic supplies Thermal shut-off circuit. Ground fault protection. Load short circuit protection. Five selectable step modes: full step, 1/2, 1/4, 1/8 and 1/16. Use: Depending on the introduction of use. Package list: 1 x for MKS DLC32 V2.1 motherboard. 1 x Blue USB Data Cable 1 x TS24; Product description Specification: Item Type:3D Printer Motherboard Kit Material: PCB. Motherboard parameters: Model: for MKSDLC32. Voltage: 12-24V DC (MCU: ESP32 WROOM 32U (32 bit) MCU Frequency: 240MHz Flash memory: 8192K bytes Memory: 520K bytes Speed: <8000 mm/min Offline display: for MKS TS24 R, TS35 R. Firmware: for GRBL Serial port driver: USB Axles WiFi onboard: 4 (X, Y1, Y2, Z). Memory Card: Support MKS Laser Tool: Support Available machine: CNC laser engraving machine Stepper motor driver: A4988, DRV 8825, TMC2208, 2209, 2225 (for Nema17 engine) Additional driver: TB6600, TMC2160 (for Nema23 engine) Laser: less than 20W (>20W, external power) Compatible software: for LaserGrbl, for Xloader, for GrblController, for Benbox, for MDraw, for LightBurn Display parameters: Model: TS24 R V2.1. Outer size: approx. 80 x 50 mm / 3.15 x 1.97 inches. Colour touch screen: 2.4 inch touch screen. Microprocessor: 32-bit STTM32 processor Update method: SD file update Support memory system: memory card Supported file format: Gcode Expandable modules: WIFI module, power failure relay module, material breakage detection switch, external card slot. A4988 Driver Features & Benefits: Low RDS Output (On) Automatic detection or selection of power drop mode. Mixed with slow power drop mode Synchronous rectification for low power consumption Internal low voltage lock. Cross-current protection. 3.3 and 5 V compatible logic supplies Thermal shut-off circuit. Ground fault protection. Load short circuit protection. Five selectable step modes: full step, 1/2, 1/4, 1/8 and 1/16. Use: Depending on the introduction of use. Package list: 1 x for MKS DLC32 V2.1 motherboard. 1 x Blue USB Data Cable 1 x TS24; Specification: Item Type:3D Printer Motherboard Kit Material: PCB. Motherboard parameters: Model: for MKSDLC32. Voltage: 12-24V DC (MCU: ESP32 WROOM 32U (32 bit) MCU Frequency: 240MHz Flash memory: 8192K bytes Memory: 520K bytes Speed: <8000 mm/min Offline display: for MKS TS24 R, TS35 R. Firmware: for GRBL Serial port driver: USB Axles WiFi onboard: 4 (X, Y1, Y2, Z). Memory Card: Support MKS Laser Tool: Support Available machine: CNC laser engraving machine Stepper motor driver: A4988, DRV 8825, TMC2208, 2209, 2225 (for Nema17 engine) Additional driver: TB6600, TMC2160 (for Nema23 engine) Laser: less than 20W (>20W, external power) Compatible software: for LaserGrbl, for Xloader, for GrblController, for Benbox, for MDraw, for LightBurn Display parameters: Model: TS24 R V2.1. Outer size: approx. 80 x 50 mm / 3.15 x 1.97 inches. Colour touch screen: 2.4 inch touch screen. Microprocessor: 32-bit STTM32 processor Update method: SD file update Support memory system: memory card Supported file format: Gcode Expandable modules: WIFI module, power failure relay module, material breakage detection switch, external card slot. A4988 Driver Features & Benefits: Low RDS Output (On) Automatic detection or selection of power drop mode. Mixed with slow power drop mode Synchronous rectification for low power consumption Internal low voltage lock. Cross-current protection. 3.3 and 5 V compatible logic supplies Thermal shut-off circuit. Ground fault protection. Load short circuit protection. Five selectable step modes: full step, 1/2, 1/4, 1/8 and 1/16. Use: Depending on the introduction of use. Package list: 1 x for MKS DLC32 V2.1 motherboard. 1 x Blue USB Data Cable 1 x TS24

Product images are for illustrative purposes only, so the information they contain may differ from the product itself. Colors, notes, parameters, sizes, dimensions, functions, and/or any other characteristics of original products may differ from their actual appearance, so please refer to the product description in the product specifications. If you have any questions, please clarify by writing in an e-mail or by filling in the comments window when placing an order.

In the event that the order is made for a product regulated by law, Anete.lv, after evaluating the legal aspect of the order, has the right to refuse the order.