Home Repair Pneumatic and Hydraulic Tools 7L Electric Hydraulic Pump YUNRUX 750W Hydraulic Motor Pump 10000PSI Hydraulic Unit for Tipping Trailers Electric Hydraulic Pump for Tipper Hydraulic Pump for Tipper Trailer

7L Electric Hydraulic Pump YUNRUX 750W Hydraulic Motor Pump 10000PSI Hydraulic Unit for Tipping Trailers Electric Hydraulic Pump for Tipper Hydraulic Pump for Tipper Trailer

7L Electric Hydraulic Pump YUNRUX 750W Hydraulic Motor Pump 10000PSI Hydraulic Unit for Tipping Trailers Electric Hydraulic Pump for Tipper Hydraulic Pump for Tipper Trailer

Availability: Delivery time 3-10 working days Availability 10

ID: 5498824

Product Code: ANEB0CYPZ3JTPT

429.79€

(Ex Tax: 355.20€)

Informacija

Description

Product images are illustrative

Product conformity check

Related products

Description

The pump can be used in various hydraulic devices. When the pump is equipped with other hydraulic tools, it can perform a variety of tasks such as lifting, pressing, bending, straightening, cutting, assembling and mounting. Reduce manual work and maximise work efficiency. Punching, bending machine, jack split hydraulic products. Working mode, manual valve control oil return. Turn on the filling machine before use, connect the electric pump to the power supply before oiling, then press the black button next to the motor to turn it on, press the manual operation switch (top) and after a few air press, press the manual operation switch (bottom) to turn off the engine and connect the oil line. (The pressure should not exceed 63 mpa during air pressure to avoid damage). After the pump is connected to the device, turn on the motor and bring the operating valve to the pressure position after the motor has rotated for 1-2 minutes. At this time, the hydraulic oil enters the cylinder for work, and the power of the hydraulic oil increases to 63 mpa as the load of its own amplifier increases. The normal working temperature of the oil pump is between 10℃ and 50℃. If the oil temperature is found to be ≥70℃, it should be stopped under high pressure after continuous operation and self-cooled before use. The pressure of the relief valve and safety valve has been set before the pump leaves the factory. The user cannot increase the pressure arbitrarily, but only reduce the pressure according to the actual working pressure, which can improve the service life of the pump station. The motor must be reliably grounded. › See more product details; Product description Specification Input voltage: AC 220V 50Hz. Flow rate: 0.6 L/min (>7Mpa) - 5 L/min (<7Mpa). Working pressure: 290 psi - 10152 psi (2 Mpa - 70 Mpa). Oil capacity: 7 litres. Power: 750 W. Motor speed: 1400 rpm. Machine size: 25 x 32.5 x 50 cm. Weight: 21.5 kg. Weight: 22.89 kg Instruction manual (English language not guaranteed). 1. Open the filler before use, the electric pump and the power connections before oiling, then press the black button next to the motor to open, press the manual power switch (up), after a few air pressure, press the manual operation switch (down), turn off the motor connected to the hose. (The pressure should not exceed 63Mpa at air pressure to avoid damage) 2. Open the motor after the pump is connected to the device, and bring the operating valve to pressure position after the motor has rotated for 1-2 minutes. At this moment, the hydraulic oil comes into the cylinder to perform the work, and the power of the hydraulic oil will increase with the load of your own booster up to 63Mpa. 3. The regular operating temperature of the oil pump is between 10℃~50℃, if the oil temperature ≥70℃ should no longer be used after continuous working under high pressure, let it self-cool before use. 4. The pressure of the relief valve and safety valve has been adjusted before the pump leaves the factory, the user cannot arbitrarily increase the pressure, but only reduce according to the actual working pressure, which can improve the service life of the pump station. 5. The motor must be reliably grounded. Package includes: 1 x electrically powered hydraulic pump. 1 x oil hose (1.8 m). 1 x quick coupling.; Product description Specification Input voltage: AC 220V 50Hz. Flow rate: 0.6 L/min (>7Mpa) - 5 L/min (<7Mpa). Working pressure: 290 psi - 10152 psi (2 Mpa - 70 Mpa). Oil capacity: 7 litres. Power: 750 W. Motor speed: 1400 rpm. Machine size: 25 x 32.5 x 50 cm. Weight: 21.5 kg. Weight: 22.89 kg Instruction manual (English language not guaranteed). 1. Open the filler before use, the electric pump and the power connections before oiling, then press the black button next to the motor to open, press the manual power switch (up), after a few air pressure, press the manual operation switch (down), turn off the motor connected to the hose. (The pressure should not exceed 63Mpa at air pressure to avoid damage) 2. Open the motor after the pump is connected to the device, and bring the operating valve to pressure position after the motor has rotated for 1-2 minutes. At this moment, the hydraulic oil comes into the cylinder to perform the work, and the power of the hydraulic oil will increase with the load of your own booster up to 63Mpa. 3. The regular operating temperature of the oil pump is between 10℃~50℃, if the oil temperature ≥70℃ should no longer be used after continuous working under high pressure, let it self-cool before use. 4. The pressure of the relief valve and safety valve has been adjusted before the pump leaves the factory, the user cannot arbitrarily increase the pressure, but only reduce according to the actual working pressure, which can improve the service life of the pump station. 5. The motor must be reliably grounded. Package includes: 1 x electrically powered hydraulic pump. 1 x oil hose (1.8 m). 1 x quick coupling.; Specification Input voltage: AC 220V 50Hz. Flow rate: 0.6 L/min (>7Mpa) - 5 L/min (<7Mpa). Working pressure: 290 psi - 10152 psi (2 Mpa - 70 Mpa). Oil capacity: 7 litres. Power: 750 W. Motor speed: 1400 rpm. Machine size: 25 x 32.5 x 50 cm. Weight: 21.5 kg. Weight: 22.89 kg Instruction manual (English language not guaranteed). 1. Open the filler before use, the electric pump and the power connections before oiling, then press the black button next to the motor to open, press the manual power switch (up), after a few air pressure, press the manual operation switch (down), turn off the motor connected to the hose. (The pressure should not exceed 63Mpa at air pressure to avoid damage) 2. Open the motor after the pump is connected to the device, and bring the operating valve to pressure position after the motor has rotated for 1-2 minutes. At this moment, the hydraulic oil comes into the cylinder to perform the work, and the power of the hydraulic oil will increase with the load of your own booster up to 63Mpa. 3. The regular operating temperature of the oil pump is between 10℃~50℃, if the oil temperature ≥70℃ should no longer be used after continuous working under high pressure, let it self-cool before use. 4. The pressure of the relief valve and safety valve has been adjusted before the pump leaves the factory, the user cannot arbitrarily increase the pressure, but only reduce according to the actual working pressure, which can improve the service life of the pump station. 5. The motor must be reliably grounded. Package includes: 1 x electrically powered hydraulic pump. 1 x oil hose (1.8 m). 1 x quick coupling.

Product images are illustrative

Product images are for illustrative purposes only, so the information they contain may differ from the product itself. Colors, notes, parameters, sizes, dimensions, functions, and/or any other characteristics of original products may differ from their actual appearance, so please refer to the product description in the product specifications. If you have any questions, please clarify by writing in an e-mail or by filling in the comments window when placing an order.

Product conformity check

In the event that the order is made for a product regulated by law, Anete.lv, after evaluating the legal aspect of the order, has the right to refuse the order.

Product Name	Unit Price	Product Code	Availability
SPINPARTS Taumelscheibe mit Stütze kompatibel mit Kawasaki K3VL28 KAK700513	762.30€	ANEB0D6NF5ZJVT	Delivery time 3-10 working days Availability 10
Pneumatischer Gummi-Radpolster, 10 cm, 100 mm, Auto-Scheiben-Aufkleber, Rad, Auto-Aufkleber-Entferner, Lackreiniger, Polierwerkzeuge (Farbe: mit Verbindungsstange)	97.98€	ANEB0D37PPYX3T	Delivery time 3-10 working days Availability 10
Hydraulic Gear Pump Hydraulikpumpe 304 Edelstahl-Zahnradpumpe KCB 83.3 Niederdruck-Ölpumpe	1,940.64€	ANEB0DQTT69X4T	Delivery time 3-10 working days Availability 10
Zahnradpumpe XV-1P 5,9 cm3/Umdrehung X1P3102FBBA \| Hydraulikzahnradpumpe - Hydraulikpumpe	429.37€	ANEB0DLGWN64WT	Delivery time 3-10 working days Availability 10
Hydraulic Gear Pump Hydraulische druck hochdruck zahnradpumpe HGP-2A-F1R 2R 3R 4R HGP 3A GPY-8-12(HGP-2A-F4RX4B)	505.34€	ANEB0DNVTZ7Q7T	Delivery time 3-10 working days Availability 10