CHM GmbH® Centrifugal Garden Pump Stainless Steel 1.5 KW with Inverter Speed Controlled 8400 L/h and 8.4 Bar Pressure Adjustable for a Constant Operating Pressure

Very good running smoothness, high pressure build up with large flow rate + inverter speed controlled and adjustable for a constant operating pressure, characterise this pump! ! Please note: this pump is only suitable if a check valve or foot valve is present at the bottom of the suction line in the water (e.g. in a well/cistern). We do not recommend the check valve above the suction line or directly in front of the pump. ! Flow rate 140 litres per minute and discharge head 84 metres. Voltage: 230 V / 50 Hz. Protection class: IP 44 This pump is only suitable if there is a check valve or foot valve at the bottom (e.g. for a well/cistern). We do not recommend the check valve directly in front of the pump and advise against purchase. ! 5 x stainless steel paddle wheels covered with plastic for good smoothness, thermal protection in the motor winding Inverter / frequency converter - intelligent speed control of the pump type VFA 10LM for pumps up to 2.2 kW, 11.5 A, 220 V. For fountain and garden pumps with a pressure of min. 3 bar and 220 volt. Energy-saving operation compared to conventional pressure switches. Extraction pressure setting (automatic switching on and off pumps as required). An inverter switches on the pump and adjusts the motor speed to the set pressure via the consumer. Max. Pressure: 8.4 bar / Max. Suction height: 8 m at 1 inch discharge height: 84 m / max. Flow rate: 8400 L/h - 140 L/min. Connection suction and pressure side: 1 inch and 1 inch The pump has 2 receptacles at the bottom, suitable for mounting on a membrane boiler (e.g. domestic waterwork) In order for an inverter to work without interference, you need an expansion vessel of min. 5 L as pressure compensation and a 5-way distributor to connect the inverter to the pump. The advantage of an inverter is that it constantly controls the pump via the rotary zal and thus an individually constant operating pressure can be set. Unlike pressure switches/pump controls where only the switch-on pressure and the shut-off pressure can be set. Show More; Product description CHM GmbH Centrifugal pump stainless steel 1500 watts flow rate 140 litres per minute and discharge head 65 metres. Very good running smoothness, high pressure build up with large flow rate characterise this pump. Please note: this pump is only suitable if a check valve or foot valve is available at the bottom (e.g. in a well/cistern). We do not recommend the check valve directly in front of the pump and advise against purchase. Technical data: centrifugal pump, 1500 watt, 1.1 kW, voltage: 230 V / 50 Hz, protection class: IP 44, delivery height: 65 m, max. Pressure: 6.5 bar. Max. Flow rate: 10200 L/h - 170 L/min. Max. Suction height: 8 m at 1¼ inch Robust and rust-proof stainless steel shaft, 5 x stainless steel paddle wheels covered with plastic for good smoothness. Max. Water temperature: 60 °C connection suction and pressure side: 11/4 inch and 11/4 inch. The pump has 2 mounts at the bottom, suitable for mounting on a membrane boiler (e.g. domestic waterwork). Cable length: 50 cm with plug L W H: 44 x 15 x 17 cm inverter / frequency converter - intelligent speed control of the pump type VFA 10. LM for Pump up to 2.2 kW, 11.5 A, 220 V. For fountain and garden pumps with a pressure of min. 3 bar and 220 volt. Energy-saving operation compared to conventional pressure switches. Extraction pressure setting (automatic switching on and off pumps as required). An inverter switches on the pump and adjusts the motor speed to the set pressure via the consumer. Suitable for pumps up to 2.2 kW / 220 V and 11.5 A. Delivery without reusable distributor. Depending on the cable diameter, it must be ordered separately from 1 inch to 1.5 inch. In order for an inverter to work without interference, you need an expansion vessel of min. 8L as pressure compensation and a 5-way distributor to connect the inverter to the pump. 24 litre CHM GmbH pressure boiler (external expansion vessel) can be found in our Amazon shop. Important: !! Garden irrigation with 3/4 or 1/2 inch hoses > > max. 3 Bere; Product description CHM GmbH Centrifugal pump stainless steel 1500 watts flow rate 140 litres per minute and discharge head 65 metres. Very good running smoothness, high pressure build up with large flow rate characterise this pump. Please note: this pump is only suitable if a check valve or foot valve is available at the bottom (e.g. in a well/cistern). We do not recommend the check valve directly in front of the pump and advise against purchase. Technical data: centrifugal pump, 1500 watt, 1.1 kW, voltage: 230 V / 50 Hz, protection class: IP 44, delivery height: 65 m, max. Pressure: 6.5 bar. Max. Flow rate: 10200 L/h - 170 L/min. Max. Suction height: 8 m at 1¼ inch Robust and rust-proof stainless steel shaft, 5 x stainless steel paddle wheels covered with plastic for good smoothness. Max. Water temperature: 60 °C connection suction and pressure side: 11/4 inch and 11/4 inch. The pump has 2 mounts at the bottom, suitable for mounting on a membrane boiler (e.g. domestic waterwork). Cable length: 50 cm with plug L W H: 44 x 15 x 17 cm inverter / frequency converter - intelligent speed control of the pump type VFA 10. LM for Pump up to 2.2 kW, 11.5 A, 220 V. For fountain and garden pumps with a pressure of min. 3 bar and 220 volt. Energy-saving operation compared to conventional pressure switches. Extraction pressure setting (automatic switching on and off pumps as required). An inverter switches on the pump and adjusts the motor speed to the set pressure via the consumer. Suitable for pumps up to 2.2 kW / 220 V and 11.5 A. Delivery without reusable distributor. Depending on the cable diameter, it must be ordered separately from 1 inch to 1.5 inch. In order for an inverter to work without interference, you need an expansion vessel of min. 8L as pressure compensation and a 5-way distributor to connect the inverter to the pump. 24 litre CHM GmbH pressure boiler (external expansion vessel) can be found in our Amazon shop. Important: !! Garden irrigation with 3/4 or 1/2 inch hoses > > max. 3 Bere; CHM GmbH Centrifugal pump stainless steel 1500 watts flow rate 140 litres per minute and discharge head 65 metres. Very good running smoothness, high pressure build up with large flow rate characterise this pump. Please note: this pump is only suitable if a check valve or foot valve is available at the bottom (e.g. in a well/cistern). We do not recommend the check valve directly in front of the pump and advise against purchase. Technical data: centrifugal pump, 1500 watt, 1.1 kW, voltage: 230 V / 50 Hz, protection class: IP 44, delivery height: 65 m, max. Pressure: 6.5 bar. Max. Flow rate: 10200 L/h - 170 L/min. Max. Suction height: 8 m at 1¼ inch Robust and rust-proof stainless steel shaft, 5 x stainless steel paddle wheels covered with plastic for good smoothness. Max. Water temperature: 60 °C connection suction and pressure side: 11/4 inch and 11/4 inch. The pump has 2 mounts at the bottom, suitable for mounting on a membrane boiler (e.g. domestic waterwork). Cable length: 50 cm with plug L W H: 44 x 15 x 17 cm inverter / frequency converter - intelligent speed control of the pump type VFA 10. LM for Pump up to 2.2 kW, 11.5 A, 220 V. For fountain and garden pumps with a pressure of min. 3 bar and 220 volt. Energy-saving operation compared to conventional pressure switches. Extraction pressure setting (automatic switching on and off pumps as required). An inverter switches on the pump and adjusts the motor speed to the set pressure via the consumer. Suitable for pumps up to 2.2 kW / 220 V and 11.5 A. Delivery without reusable distributor. Depending on the cable diameter, it must be ordered separately from 1 inch to 1.5 inch. In order for an inverter to work without interference, you need an expansion vessel of min. 8L as pressure compensation and a 5-way distributor to connect the inverter to the pump. 24 litre CHM GmbH pressure boiler (external expansion vessel) can be found in our Amazon shop. Important: !! Garden irrigation with 3/4 or 1/2 inch hoses > > max. 3 Bere

Product images are for illustrative purposes only, so the information they contain may differ from the product itself. Colors, notes, parameters, sizes, dimensions, functions, and/or any other characteristics of original products may differ from their actual appearance, so please refer to the product description in the product specifications. If you have any questions, please clarify by writing in an e-mail or by filling in the comments window when placing an order.

In the event that the order is made for a product regulated by law, Anete.lv, after evaluating the legal aspect of the order, has the right to refuse the order.