Home Repair Pneumatic and Hydraulic Tools Calpeda Water Pump NM3A 2.20 kW Thread from 1.2 to 8.4 m³/h Three-Phase 380 V

Calpeda Water Pump NM3A 2.20 kW Thread from 1.2 to 8.4 m³/h Three-Phase 380 V

Availability: Delivery time 3-10 working days Availability 10

ID: 5505015

Product Code: ANEB08C2P8DPWT

1,007.05€

(Ex Tax: 832.27€)

Informacija

Description

Product images are illustrative

Product conformity check

Related products

Description

Product description This Calpeda water pump is ideal for household and industrial applications to supply clean water for heating systems, packaging, cooling, etc. Equipped with a 3-phase induction pump with 380 V, this 1-inch centrifugal pump with thread is 2900 rpm. Ideal for a suction height of up to 7 metres. Use: The centrifugal pump 1 inch 2900 rpm, CALPEDA NM three-phase is ideal for household and industrial applications to supply clean water for heating systems, packaging, cooling, fire service and irrigation. Calpeda is recommended for this water pump to use between -10°C and +90°C. The ambient temperature of the place where this pump is to be installed must not exceed 40°C. Design: the pump with centrifuge monoblock thread 1 inch 2900 rpm. Calpeda NM consists of a pump body on a base and a cast iron root lantern that accepts an operating pressure of up to 10 bar. The turbine is made of brass and the holes with thread ISO 228/1 inch (1 inch induction motor). 2 pin with a speed of 2900 rpm, with protection class IP54, class F and continuous service. Class IE3 induction motor allows high efficiency with low power consumption. With this 380 V three-phase motor, lipsotherms and capacitors are not integrated. The clutch shaft between turbine and induction motor is made of stainless steel. The standard mechanical insert is made of hard carbon and ceramic and allows for a good seal between the pump body and the induction motor. For a longer life of the water pump, this filling can be replaced.; Product description This Calpeda water pump is ideal for household and industrial applications to supply clean water for heating systems, packaging, cooling, etc. Equipped with a 3-phase induction pump with 380 V, this 1-inch centrifugal pump with thread is 2900 rpm. Ideal for a suction height of up to 7 metres. Use: The centrifugal pump 1 inch 2900 rpm, CALPEDA NM three-phase is ideal for household and industrial applications to supply clean water for heating systems, packaging, cooling, fire service and irrigation. Calpeda is recommended for this water pump to use between -10°C and +90°C. The ambient temperature of the place where this pump is to be installed must not exceed 40°C. Design: the pump with centrifuge monoblock thread 1 inch 2900 rpm. Calpeda NM consists of a pump body on a base and a cast iron root lantern that accepts an operating pressure of up to 10 bar. The turbine is made of brass and the holes with thread ISO 228/1 inch (1 inch induction motor). 2 pin with a speed of 2900 rpm, with protection class IP54, class F and continuous service. Class IE3 induction motor allows high efficiency with low power consumption. With this 380 V three-phase motor, lipsotherms and capacitors are not integrated. The clutch shaft between turbine and induction motor is made of stainless steel. The standard mechanical insert is made of hard carbon and ceramic and allows for a good seal between the pump body and the induction motor. For a longer life of the water pump, this filling can be replaced.; This Calpeda water pump is ideal for household and industrial applications to supply clean water for heating systems, packaging, cooling, etc. Equipped with a 3-phase induction pump with 380 V, this 1-inch centrifugal pump with thread is 2900 rpm. Ideal for a suction height of up to 7 metres. Use: The centrifugal pump 1 inch 2900 rpm, CALPEDA NM three-phase is ideal for household and industrial applications to supply clean water for heating systems, packaging, cooling, fire service and irrigation. Calpeda is recommended for this water pump to use between -10°C and +90°C. The ambient temperature of the place where this pump is to be installed must not exceed 40°C. Design: the pump with centrifuge monoblock thread 1 inch 2900 rpm. Calpeda NM consists of a pump body on a base and a cast iron root lantern that accepts an operating pressure of up to 10 bar. The turbine is made of brass and the holes with thread ISO 228/1 inch (1 inch induction motor). 2 pin with a speed of 2900 rpm, with protection class IP54, class F and continuous service. Class IE3 induction motor allows high efficiency with low power consumption. With this 380 V three-phase motor, lipsotherms and capacitors are not integrated. The clutch shaft between turbine and induction motor is made of stainless steel. The standard mechanical insert is made of hard carbon and ceramic and allows for a good seal between the pump body and the induction motor. For a longer life of the water pump, this filling can be replaced.

Product images are illustrative

Product images are for illustrative purposes only, so the information they contain may differ from the product itself. Colors, notes, parameters, sizes, dimensions, functions, and/or any other characteristics of original products may differ from their actual appearance, so please refer to the product description in the product specifications. If you have any questions, please clarify by writing in an e-mail or by filling in the comments window when placing an order.

Product conformity check

In the event that the order is made for a product regulated by law, Anete.lv, after evaluating the legal aspect of the order, has the right to refuse the order.

Product Name	Unit Price	Product Code	Availability
FANNIXI Hydraulic Pump Steering 50T-39FRL-PA-10 Hydraulic Vane Pump	1,135.62€	ANEB0DB57ZQN1T	Delivery time 3-10 working days Availability 10
With Guide Rod Hole 12/16/20/25/32/40mm, Stroke 10-175mm, Compact Guide Cylinder, Thin Triaxial Pneumatic Cylinder (Color : Trip150mm, Size : MGPM16)	266.99€	ANEB0D256D2NST	Delivery time 3-10 working days Availability 10
PM-4 Pneumatic Fittings PM Straight Bulkhead Connector 4-12mm OD Hose Plastic Push In Gas Quick Connector Air Fitting 20pcs	117.55€	ANEB0D8CCT9XMT	Delivery time 3-10 working days Availability 10
ABUS HLZS814 F1 203510 Door Fitting with Steel Cylinder Protection Square Aluminium	105.80€	ANEB00187Q61GT	Delivery time 3-10 working days Availability 10
JOLAU Mechanical Seals Type 21-2 1/2 Inch; T21-2 1/2 Inch T21-2.5 Inch J-Crane Elastomer Bellows Mechanical Seals Type 21 for Pumps Material TC/TC/VIT	393.93€	ANE55B0BLRVS9C1T	Delivery time 3-10 working days Availability 10