WZI250 Single-stage Garden Pump Centrifugal Pump Jet Pump 250 W 2100 L/h 3.5 Bar

Single stage garden pump/jet pump WZI250 Power: 250 W, voltage: 230 V/50 Hz, protection class: IP44 Max. Delivery height: 35 m / max. Delivery pressure: 3.5 bar, max. Flow rate: 2100 l/h = 35 l/min Max. Suction height: 8 m with 1 inch suction line and existing check valve Integrated thermal motor protection switch, cast pump housing, suction side: 1 inch (2.54 cm) internal thread, connection pressure side: 1 inch (2.54 cm) internal thread, dimensions (L x W x H): 25 cm x 15 cm x 20 cm, cable length: approx. 40 cm. Weight: approx. 6 kg › See more product details; Product description Single-stage garden pump / jet pump WZI250 // Small, robust pump with solid cast housing // Technical data of the pump: power: 250 W / 2.2 A // Voltage: 230 V / 50 Hz // Protection class: IP44 // Max. Pressure / max. Delivery height: 3.5 bar corresponding to 35 m // Max. Flow rate: 2100 L/h (35 L/min) // Connection suction side: 1 inch (2.54 cm) internal thread // Connection pressure side: 1 inch (2.54 cm) internal thread // Max. Suction power: 8 m with 1 inch suction line and existing check valve. Cable length: approx. 40 cm. Weight: approx. 6 kg. Dimensions (L x W x H): 25 cm x 15 cm x 20 cm. Max. Water temperature: 35 °C. Integrated thermal motor protection switch. Solid cast material. Important information before first start-up! // - Always read the instruction manual in advance, if you have any questions, please contact us or consult a professional. // - To achieve the max. to ensure suction power, the pump should always be placed near the well. Always install a check valve in the suction line, as the pump requires an existing water column. // (For suction hoses, a foot valve is recommended, for beaten pipes, the check valve can only be installed above ground) // - Always fill the pump and the suction line with water before first commissioning, otherwise the pump can run dry. If possible, always use a pump control or dry run protection to ensure the longevity of your product. //; Product description Single-stage garden pump / jet pump WZI250 // Small, robust pump with solid cast housing // Technical data of the pump: power: 250 W / 2.2 A // Voltage: 230 V / 50 Hz // Protection class: IP44 // Max. Pressure / max. Delivery height: 3.5 bar corresponding to 35 m // Max. Flow rate: 2100 L/h (35 L/min) // Connection suction side: 1 inch (2.54 cm) internal thread // Connection pressure side: 1 inch (2.54 cm) internal thread // Max. Suction power: 8 m with 1 inch suction line and existing check valve. Cable length: approx. 40 cm. Weight: approx. 6 kg. Dimensions (L x W x H): 25 cm x 15 cm x 20 cm. Max. Water temperature: 35 °C. Integrated thermal motor protection switch. Solid cast material. Important information before first start-up! // - Always read the instruction manual in advance, if you have any questions, please contact us or consult a professional. // - To achieve the max. to ensure suction power, the pump should always be placed near the well. Always install a check valve in the suction line, as the pump requires an existing water column. // (For suction hoses, a foot valve is recommended, for beaten pipes, the check valve can only be installed above ground) // - Always fill the pump and the suction line with water before first commissioning, otherwise the pump can run dry. If possible, always use a pump control or dry run protection to ensure the longevity of your product. //; Single-stage garden pump / jet pump WZI250 // Small, robust pump with solid cast housing // Technical data of the pump: power: 250 W / 2.2 A // Voltage: 230 V / 50 Hz // Protection class: IP44 // Max. Pressure / max. Delivery height: 3.5 bar corresponding to 35 m // Max. Flow rate: 2100 L/h (35 L/min) // Connection suction side: 1 inch (2.54 cm) internal thread // Connection pressure side: 1 inch (2.54 cm) internal thread // Max. Suction power: 8 m with 1 inch suction line and existing check valve. Cable length: approx. 40 cm. Weight: approx. 6 kg. Dimensions (L x W x H): 25 cm x 15 cm x 20 cm. Max. Water temperature: 35 °C. Integrated thermal motor protection switch. Solid cast material. Important information before first start-up! // - Always read the instruction manual in advance, if you have any questions, please contact us or consult a professional. // - To achieve the max. to ensure suction power, the pump should always be placed near the well. Always install a check valve in the suction line, as the pump requires an existing water column. // (For suction hoses, a foot valve is recommended, for beaten pipes, the check valve can only be installed above ground) // - Always fill the pump and the suction line with water before first commissioning, otherwise the pump can run dry. If possible, always use a pump control or dry run protection to ensure the longevity of your product. //

Product images are for illustrative purposes only, so the information they contain may differ from the product itself. Colors, notes, parameters, sizes, dimensions, functions, and/or any other characteristics of original products may differ from their actual appearance, so please refer to the product description in the product specifications. If you have any questions, please clarify by writing in an e-mail or by filling in the comments window when placing an order.

In the event that the order is made for a product regulated by law, Anete.lv, after evaluating the legal aspect of the order, has the right to refuse the order.